Date: Fri, 20 Jul 2001 18:30:50 -0500 From: Matt Crawford <crawdad@fnal.gov> To: questions@freebsd.org Subject: Re: Inserting Aironet 4800 card hangs FreeBSD 4.3-RELEASE GENERIC Message-ID: <200107202330.f6KNUoF12098@gungnir.fnal.gov> References: <200107202156.f6KLu2F11821@gungnir.fnal.gov>
next in thread | previous in thread | raw e-mail | index | archive | help
> I have a Sony Vaio Z505DX with a recent (last week) installation of > FreeBSD 4.3. ... > FreeBSD gleipnir.dhcp.fnal.gov 4.3-RELEASE FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC i386 Here's more information. I also tried a Panasonic PCMCIA CDROM controller and got pretty much the same result. So it's something endemic to pccards, and probably not the Aironet. The laptop has had the vendor's "Windows 2000 BIOS upgrade". Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (331.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di cs0 config> di bt0 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 126226432 (123268K bytes) Preloaded elf kernel "kernel" at 0xc044d000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc044d09c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfed00000-0xfedfffff,0xfecff000-0xfecfffff irq 9 at device 6.0 on pci0 fxp0: Ethernet address 08:00:46:04:03:e7 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 7.3 on pci0 pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 8.0 irq 9 chip2: <NeoMagic MagicMedia 256AX Audio controller> mem 0xfea00000-0xfeafffff,0xfe000000-0xfe3fffff irq 9 at device 8.1 on pci0 chip3: <Sony CXD1847A FireWire Host Controller> at device 9.0 on pci0 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 10.0 on pci0 pci0: <unknown card> (vendor=0x127a, dev=0x2005) at 11.0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 6194MB <TOSHIBA MK6412MAT> [13424/15/63] at ata0-master UDMA33 ad2: 3MB <MEMORYSTICK 4M 8K> [247/2/16] at ata1-master PIO1 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200107202330.f6KNUoF12098>