Date: Fri, 20 Apr 2001 22:15:32 -0400 (EDT) From: Gerry Freymann <freymann@eagle.ca> To: Matthew Emmerton <matt@gsicomp.on.ca> Cc: freebsd-questions@freebsd.org Subject: Re: PPPoE causes a Kernel Panic Message-ID: <Pine.BSF.4.21.0104202205540.91829-100000@marlo.eagle.ca> In-Reply-To: <011c01c0ca06$b3be1f90$1200a8c0@gsicomp.on.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 20 Apr 2001, Matthew Emmerton wrote:
> An excellent choice. I did that with HSE last year.
So it *is* possible! lol. I want that... too!
> This is obviously not a good thing :) However, help is not too far away.
Kewl, much appreciated.
> What is your 'set device' line in ppp.conf?
default:
set device PPPoE:vr1
set mru 1492
set mtu 1492
set authname 12345669
set authkey abcdefg
set log Phase tun command
set dial
set login
set ifaddr 10.0.0.1/0 10.0.0.2/0
add default HISADDR
nat enable yes
papchap:
set authname 12345669
set authkey abcdefg
> For the network card that
> you're using for HSE, are you doing any ifconfig stuff for it
network_interfaces="vr0 vr1 lo0"
ifconfig_vr0="inet 192.168.0.10 netmask 255.255.255.0 mtu 1450"
And I rem'd out the "default gateway" line in rc.conf
Here's a recent ifconfig -a:
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1450
inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::250:baff:fede:f1fc%vr0 prefixlen 64 scopeid 0x1
ether 00:50:ba:de:f1:fc
media: autoselect (10baseT/UTP) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP none
vr1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:80:c8:f9:c5:50
media: autoselect (none) status: no carrier
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP none
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8000<MULTICAST> mtu 1500
> If you're feeling adventurous, I can guide your through the fun task of
> performing a panic dump and a kernel debug, if you wish.
I want this thing to work, so any help you feel like offering, I'm game!
Thanks.
Don't worry about the various addresses...
freymann@eagle.ca
scaryg@sputnik.org
freymann@scaryg.shackent.nu
They are all me.
-gf
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0104202205540.91829-100000>