From owner-svn-src-all@FreeBSD.ORG  Fri Mar 20 21:57:55 2009
Return-Path: <owner-svn-src-all@FreeBSD.ORG>
Delivered-To: svn-src-all@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id 50CCD106566B;
	Fri, 20 Mar 2009 21:57:55 +0000 (UTC)
	(envelope-from thompsa@FreeBSD.org)
Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:4f8:fff6::2c])
	by mx1.freebsd.org (Postfix) with ESMTP id 3DA258FC0C;
	Fri, 20 Mar 2009 21:57:55 +0000 (UTC)
	(envelope-from thompsa@FreeBSD.org)
Received: from svn.freebsd.org (localhost [127.0.0.1])
	by svn.freebsd.org (8.14.3/8.14.3) with ESMTP id n2KLvtht014897;
	Fri, 20 Mar 2009 21:57:55 GMT (envelope-from thompsa@svn.freebsd.org)
Received: (from thompsa@localhost)
	by svn.freebsd.org (8.14.3/8.14.3/Submit) id n2KLvsdj014880;
	Fri, 20 Mar 2009 21:57:54 GMT (envelope-from thompsa@svn.freebsd.org)
Message-Id: <200903202157.n2KLvsdj014880@svn.freebsd.org>
From: Andrew Thompson <thompsa@FreeBSD.org>
Date: Fri, 20 Mar 2009 21:57:54 +0000 (UTC)
To: src-committers@freebsd.org, svn-src-all@freebsd.org,
	svn-src-head@freebsd.org
X-SVN-Group: head
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Cc: 
Subject: svn commit: r190183 - head/sys/dev/usb/controller
X-BeenThere: svn-src-all@freebsd.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: "SVN commit messages for the entire src tree \(except for &quot;
	user&quot; and &quot; projects&quot; \)" <svn-src-all.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/svn-src-all>,
	<mailto:svn-src-all-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/svn-src-all>
List-Post: <mailto:svn-src-all@freebsd.org>
List-Help: <mailto:svn-src-all-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/svn-src-all>,
	<mailto:svn-src-all-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Fri, 20 Mar 2009 21:57:55 -0000

Author: thompsa
Date: Fri Mar 20 21:57:54 2009
New Revision: 190183
URL: http://svn.freebsd.org/changeset/base/190183

Log:
  MFp4 //depot/projects/usb @159479,159502,159516,159522,159529
  
  Workaround for buggy USB hardware not handling new SETUP packet before STATUS
  stage is complete, this allows xfers to endpoint0 to return a short frame.
  
  Submitted by:	Hans Petter Selasky
  Reported by:	me

Modified:
  head/sys/dev/usb/controller/at91dci.c
  head/sys/dev/usb/controller/at91dci_atmelarm.c
  head/sys/dev/usb/controller/atmegadci.c
  head/sys/dev/usb/controller/atmegadci_atmelarm.c
  head/sys/dev/usb/controller/ehci.c
  head/sys/dev/usb/controller/ehci_ixp4xx.c
  head/sys/dev/usb/controller/ehci_mbus.c
  head/sys/dev/usb/controller/ehci_pci.c
  head/sys/dev/usb/controller/musb_otg.c
  head/sys/dev/usb/controller/musb_otg_atmelarm.c
  head/sys/dev/usb/controller/ohci.c
  head/sys/dev/usb/controller/ohci_atmelarm.c
  head/sys/dev/usb/controller/ohci_pci.c
  head/sys/dev/usb/controller/uhci.c
  head/sys/dev/usb/controller/uhci_pci.c
  head/sys/dev/usb/controller/uss820dci.c
  head/sys/dev/usb/controller/uss820dci_atmelarm.c

Modified: head/sys/dev/usb/controller/at91dci.c
==============================================================================
--- head/sys/dev/usb/controller/at91dci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/at91dci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -887,8 +887,8 @@ at91dci_setup_standard_chain(struct usb2
 
 	temp.td = NULL;
 	temp.td_next = xfer->td_start[0];
-	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 	temp.offset = 0;
+	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 
 	sc = AT9100_DCI_BUS2SC(xfer->xroot->bus);
 	ep_no = (xfer->endpoint & UE_ADDR);
@@ -902,6 +902,12 @@ at91dci_setup_standard_chain(struct usb2
 			temp.len = xfer->frlengths[0];
 			temp.pc = xfer->frbuffers + 0;
 			temp.short_pkt = temp.len ? 1 : 0;
+			/* check for last frame */
+			if (xfer->nframes == 1) {
+				/* no STATUS stage yet, SETUP is last */
+				if (xfer->flags_int.control_act)
+					temp.setup_alt_next = 0;
+			}
 
 			at91dci_setup_standard_chain_sub(&temp);
 		}
@@ -933,7 +939,13 @@ at91dci_setup_standard_chain(struct usb2
 		x++;
 
 		if (x == xfer->nframes) {
-			temp.setup_alt_next = 0;
+			if (xfer->flags_int.control_xfr) {
+				if (xfer->flags_int.control_act) {
+					temp.setup_alt_next = 0;
+				}
+			} else {
+				temp.setup_alt_next = 0;
+			}
 		}
 		if (temp.len == 0) {
 
@@ -958,47 +970,46 @@ at91dci_setup_standard_chain(struct usb2
 		}
 	}
 
-	/* always setup a valid "pc" pointer for status and sync */
-	temp.pc = xfer->frbuffers + 0;
-
-	/* check if we need to sync */
-	if (need_sync && xfer->flags_int.control_xfr) {
-
-		/* we need a SYNC point after TX */
-		temp.func = &at91dci_data_tx_sync;
-		temp.len = 0;
-		temp.short_pkt = 0;
-
-		at91dci_setup_standard_chain_sub(&temp);
-	}
-	/* check if we should append a status stage */
-	if (xfer->flags_int.control_xfr &&
-	    !xfer->flags_int.control_act) {
+	/* check for control transfer */
+	if (xfer->flags_int.control_xfr) {
 
-		/*
-		 * Send a DATA1 message and invert the current
-		 * endpoint direction.
-		 */
-		if (xfer->endpoint & UE_DIR_IN) {
-			temp.func = &at91dci_data_rx;
-			need_sync = 0;
-		} else {
-			temp.func = &at91dci_data_tx;
-			need_sync = 1;
-		}
+		/* always setup a valid "pc" pointer for status and sync */
+		temp.pc = xfer->frbuffers + 0;
 		temp.len = 0;
 		temp.short_pkt = 0;
+		temp.setup_alt_next = 0;
 
-		at91dci_setup_standard_chain_sub(&temp);
+		/* check if we need to sync */
 		if (need_sync) {
 			/* we need a SYNC point after TX */
 			temp.func = &at91dci_data_tx_sync;
-			temp.len = 0;
-			temp.short_pkt = 0;
+			at91dci_setup_standard_chain_sub(&temp);
+		}
+
+		/* check if we should append a status stage */
+		if (!xfer->flags_int.control_act) {
+
+			/*
+			 * Send a DATA1 message and invert the current
+			 * endpoint direction.
+			 */
+			if (xfer->endpoint & UE_DIR_IN) {
+				temp.func = &at91dci_data_rx;
+				need_sync = 0;
+			} else {
+				temp.func = &at91dci_data_tx;
+				need_sync = 1;
+			}
 
 			at91dci_setup_standard_chain_sub(&temp);
+			if (need_sync) {
+				/* we need a SYNC point after TX */
+				temp.func = &at91dci_data_tx_sync;
+				at91dci_setup_standard_chain_sub(&temp);
+			}
 		}
 	}
+
 	/* must have at least one frame! */
 	td = temp.td;
 	xfer->td_transfer_last = td;

Modified: head/sys/dev/usb/controller/at91dci_atmelarm.c
==============================================================================
--- head/sys/dev/usb/controller/at91dci_atmelarm.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/at91dci_atmelarm.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -204,10 +204,10 @@ at91_udp_attach(device_t dev)
 
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(dev, sc->sc_dci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl);
+	    NULL, (driver_intr_t *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl);
 #else
 	err = bus_setup_intr(dev, sc->sc_dci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl);
+	    (driver_intr_t *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl);
 #endif
 	if (err) {
 		sc->sc_dci.sc_intr_hdl = NULL;
@@ -215,10 +215,10 @@ at91_udp_attach(device_t dev)
 	}
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(dev, sc->sc_vbus_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl);
+	    NULL, (driver_intr_t *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl);
 #else
 	err = bus_setup_intr(dev, sc->sc_vbus_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl);
+	    (driver_intr_t *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl);
 #endif
 	if (err) {
 		sc->sc_vbus_intr_hdl = NULL;

Modified: head/sys/dev/usb/controller/atmegadci.c
==============================================================================
--- head/sys/dev/usb/controller/atmegadci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/atmegadci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -791,8 +791,8 @@ atmegadci_setup_standard_chain(struct us
 
 	temp.td = NULL;
 	temp.td_next = xfer->td_start[0];
-	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 	temp.offset = 0;
+	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 
 	sc = ATMEGA_BUS2SC(xfer->xroot->bus);
 	ep_no = (xfer->endpoint & UE_ADDR);
@@ -806,6 +806,12 @@ atmegadci_setup_standard_chain(struct us
 			temp.len = xfer->frlengths[0];
 			temp.pc = xfer->frbuffers + 0;
 			temp.short_pkt = temp.len ? 1 : 0;
+			/* check for last frame */
+			if (xfer->nframes == 1) {
+				/* no STATUS stage yet, SETUP is last */
+				if (xfer->flags_int.control_act)
+					temp.setup_alt_next = 0;
+			}
 
 			atmegadci_setup_standard_chain_sub(&temp);
 		}
@@ -837,7 +843,13 @@ atmegadci_setup_standard_chain(struct us
 		x++;
 
 		if (x == xfer->nframes) {
-			temp.setup_alt_next = 0;
+			if (xfer->flags_int.control_xfr) {
+				if (xfer->flags_int.control_act) {
+					temp.setup_alt_next = 0;
+				}
+			} else {
+				temp.setup_alt_next = 0;
+			}
 		}
 		if (temp.len == 0) {
 
@@ -862,45 +874,42 @@ atmegadci_setup_standard_chain(struct us
 		}
 	}
 
-	/* always setup a valid "pc" pointer for status and sync */
-	temp.pc = xfer->frbuffers + 0;
-
-	/* check if we need to sync */
-	if (need_sync && xfer->flags_int.control_xfr) {
+	if (xfer->flags_int.control_xfr) {
 
-		/* we need a SYNC point after TX */
-		temp.func = &atmegadci_data_tx_sync;
+		/* always setup a valid "pc" pointer for status and sync */
+		temp.pc = xfer->frbuffers + 0;
 		temp.len = 0;
 		temp.short_pkt = 0;
+		temp.setup_alt_next = 0;
 
-		atmegadci_setup_standard_chain_sub(&temp);
-	}
-	/* check if we should append a status stage */
-	if (xfer->flags_int.control_xfr &&
-	    !xfer->flags_int.control_act) {
-
-		/*
-		 * Send a DATA1 message and invert the current
-		 * endpoint direction.
-		 */
-		if (xfer->endpoint & UE_DIR_IN) {
-			temp.func = &atmegadci_data_rx;
-			need_sync = 0;
-		} else {
-			temp.func = &atmegadci_data_tx;
-			need_sync = 1;
-		}
-		temp.len = 0;
-		temp.short_pkt = 0;
-
-		atmegadci_setup_standard_chain_sub(&temp);
+		/* check if we need to sync */
 		if (need_sync) {
 			/* we need a SYNC point after TX */
 			temp.func = &atmegadci_data_tx_sync;
-			temp.len = 0;
-			temp.short_pkt = 0;
+			atmegadci_setup_standard_chain_sub(&temp);
+		}
+
+		/* check if we should append a status stage */
+		if (!xfer->flags_int.control_act) {
+
+			/*
+			 * Send a DATA1 message and invert the current
+			 * endpoint direction.
+			 */
+			if (xfer->endpoint & UE_DIR_IN) {
+				temp.func = &atmegadci_data_rx;
+				need_sync = 0;
+			} else {
+				temp.func = &atmegadci_data_tx;
+				need_sync = 1;
+			}
 
 			atmegadci_setup_standard_chain_sub(&temp);
+			if (need_sync) {
+				/* we need a SYNC point after TX */
+				temp.func = &atmegadci_data_tx_sync;
+				atmegadci_setup_standard_chain_sub(&temp);
+			}
 		}
 	}
 	/* must have at least one frame! */

Modified: head/sys/dev/usb/controller/atmegadci_atmelarm.c
==============================================================================
--- head/sys/dev/usb/controller/atmegadci_atmelarm.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/atmegadci_atmelarm.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -113,7 +113,7 @@ atmegadci_attach(device_t dev)
 	device_set_ivars(sc->sc_otg.sc_bus.bdev, &sc->sc_otg.sc_bus);
 
 	err = bus_setup_intr(dev, sc->sc_otg.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)atmegadci_interrupt, sc, &sc->sc_otg.sc_intr_hdl);
+	    NULL, (driver_intr_t *)atmegadci_interrupt, sc, &sc->sc_otg.sc_intr_hdl);
 	if (err) {
 		sc->sc_otg.sc_intr_hdl = NULL;
 		goto error;

Modified: head/sys/dev/usb/controller/ehci.c
==============================================================================
--- head/sys/dev/usb/controller/ehci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/ehci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -117,7 +117,7 @@ struct ehci_std_temp {
 	uint8_t	shortpkt;
 	uint8_t	auto_data_toggle;
 	uint8_t	setup_alt_next;
-	uint8_t	short_frames_ok;
+	uint8_t	last_frame;
 };
 
 void
@@ -1546,10 +1546,12 @@ ehci_setup_standard_chain_sub(struct ehc
 	uint32_t buf_offset;
 	uint32_t average;
 	uint32_t len_old;
+	uint32_t terminate;
 	uint8_t shortpkt_old;
 	uint8_t precompute;
 
-	qtd_altnext = htohc32(temp->sc, EHCI_LINK_TERMINATE);
+	terminate = htohc32(temp->sc, EHCI_LINK_TERMINATE);
+	qtd_altnext = terminate;
 	td_alt_next = NULL;
 	buf_offset = 0;
 	shortpkt_old = temp->shortpkt;
@@ -1696,14 +1698,17 @@ restart:
 		precompute = 0;
 
 		/* setup alt next pointer, if any */
-		if (temp->short_frames_ok) {
-			if (temp->setup_alt_next) {
-				td_alt_next = td_next;
-				qtd_altnext = td_next->qtd_self;
-			}
+		if (temp->last_frame) {
+			td_alt_next = NULL;
+			qtd_altnext = terminate;
 		} else {
 			/* we use this field internally */
 			td_alt_next = td_next;
+			if (temp->setup_alt_next) {
+				qtd_altnext = td_next->qtd_self;
+			} else {
+				qtd_altnext = terminate;
+			}
 		}
 
 		/* restore */
@@ -1746,8 +1751,8 @@ ehci_setup_standard_chain(struct usb2_xf
 	temp.td = NULL;
 	temp.td_next = td;
 	temp.qtd_status = 0;
+	temp.last_frame = 0;
 	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
-	temp.short_frames_ok = xfer->flags_int.short_frames_ok;
 
 	if (xfer->flags_int.control_xfr) {
 		if (xfer->pipe->toggle_next) {
@@ -1780,7 +1785,14 @@ ehci_setup_standard_chain(struct usb2_xf
 			temp.len = xfer->frlengths[0];
 			temp.pc = xfer->frbuffers + 0;
 			temp.shortpkt = temp.len ? 1 : 0;
-
+			/* check for last frame */
+			if (xfer->nframes == 1) {
+				/* no STATUS stage yet, SETUP is last */
+				if (xfer->flags_int.control_act) {
+					temp.last_frame = 1;
+					temp.setup_alt_next = 0;
+				}
+			}
 			ehci_setup_standard_chain_sub(&temp);
 		}
 		x = 1;
@@ -1798,7 +1810,16 @@ ehci_setup_standard_chain(struct usb2_xf
 		x++;
 
 		if (x == xfer->nframes) {
-			temp.setup_alt_next = 0;
+			if (xfer->flags_int.control_xfr) {
+				/* no STATUS stage yet, DATA is last */
+				if (xfer->flags_int.control_act) {
+					temp.last_frame = 1;
+					temp.setup_alt_next = 0;
+				}
+			} else {
+				temp.last_frame = 1;
+				temp.setup_alt_next = 0;
+			}
 		}
 		/* keep previous data toggle and error count */
 
@@ -1855,6 +1876,8 @@ ehci_setup_standard_chain(struct usb2_xf
 		temp.len = 0;
 		temp.pc = NULL;
 		temp.shortpkt = 0;
+		temp.last_frame = 1;
+		temp.setup_alt_next = 0;
 
 		ehci_setup_standard_chain_sub(&temp);
 	}

Modified: head/sys/dev/usb/controller/ehci_ixp4xx.c
==============================================================================
--- head/sys/dev/usb/controller/ehci_ixp4xx.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/ehci_ixp4xx.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -189,7 +189,7 @@ ehci_ixp_attach(device_t self)
 
 
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)(void *)ehci_interrupt, sc, &sc->sc_intr_hdl);
+	    NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
 	if (err) {
 		device_printf(self, "Could not setup irq, %d\n", err);
 		sc->sc_intr_hdl = NULL;

Modified: head/sys/dev/usb/controller/ehci_mbus.c
==============================================================================
--- head/sys/dev/usb/controller/ehci_mbus.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/ehci_mbus.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -210,7 +210,7 @@ ehci_mbus_attach(device_t self)
 	    MV_USB_DEVICE_UNDERFLOW);
 
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)(void *)ehci_interrupt, sc, &sc->sc_intr_hdl);
+	    NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
 	if (err) {
 		device_printf(self, "Could not setup irq, %d\n", err);
 		sc->sc_intr_hdl = NULL;

Modified: head/sys/dev/usb/controller/ehci_pci.c
==============================================================================
--- head/sys/dev/usb/controller/ehci_pci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/ehci_pci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -338,10 +338,10 @@ ehci_pci_attach(device_t self)
 
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)(void *)ehci_interrupt, sc, &sc->sc_intr_hdl);
+	    NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
 #else
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)(void *)ehci_interrupt, sc, &sc->sc_intr_hdl);
+	    (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
 #endif
 	if (err) {
 		device_printf(self, "Could not setup irq, %d\n", err);

Modified: head/sys/dev/usb/controller/musb_otg.c
==============================================================================
--- head/sys/dev/usb/controller/musb_otg.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/musb_otg.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -1132,8 +1132,8 @@ musbotg_setup_standard_chain(struct usb2
 
 	temp.td = NULL;
 	temp.td_next = xfer->td_start[0];
-	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 	temp.offset = 0;
+	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 
 	sc = MUSBOTG_BUS2SC(xfer->xroot->bus);
 	ep_no = (xfer->endpoint & UE_ADDR);
@@ -1180,7 +1180,13 @@ musbotg_setup_standard_chain(struct usb2
 		x++;
 
 		if (x == xfer->nframes) {
-			temp.setup_alt_next = 0;
+			if (xfer->flags_int.control_xfr) {
+				if (xfer->flags_int.control_act) {
+					temp.setup_alt_next = 0;
+				}
+			} else {
+				temp.setup_alt_next = 0;
+			}
 		}
 		if (temp.len == 0) {
 
@@ -1205,23 +1211,24 @@ musbotg_setup_standard_chain(struct usb2
 		}
 	}
 
-	/* always setup a valid "pc" pointer for status and sync */
-	temp.pc = xfer->frbuffers + 0;
-
-	/* check if we should append a status stage */
-
-	if (xfer->flags_int.control_xfr &&
-	    !xfer->flags_int.control_act) {
+	/* check for control transfer */
+	if (xfer->flags_int.control_xfr) {
 
-		/*
-		 * Send a DATA1 message and invert the current
-		 * endpoint direction.
-		 */
-		temp.func = &musbotg_setup_status;
+		/* always setup a valid "pc" pointer for status and sync */
+		temp.pc = xfer->frbuffers + 0;
 		temp.len = 0;
 		temp.short_pkt = 0;
+		temp.setup_alt_next = 0;
 
-		musbotg_setup_standard_chain_sub(&temp);
+		/* check if we should append a status stage */
+		if (!xfer->flags_int.control_act) {
+			/*
+			 * Send a DATA1 message and invert the current
+			 * endpoint direction.
+			 */
+			temp.func = &musbotg_setup_status;
+			musbotg_setup_standard_chain_sub(&temp);
+		}
 	}
 	/* must have at least one frame! */
 	td = temp.td;

Modified: head/sys/dev/usb/controller/musb_otg_atmelarm.c
==============================================================================
--- head/sys/dev/usb/controller/musb_otg_atmelarm.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/musb_otg_atmelarm.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -130,10 +130,10 @@ musbotg_attach(device_t dev)
 
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(dev, sc->sc_otg.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)musbotg_interrupt, sc, &sc->sc_otg.sc_intr_hdl);
+	    NULL, (driver_intr_t *)musbotg_interrupt, sc, &sc->sc_otg.sc_intr_hdl);
 #else
 	err = bus_setup_intr(dev, sc->sc_otg.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)musbotg_interrupt, sc, &sc->sc_otg.sc_intr_hdl);
+	    (driver_intr_t *)musbotg_interrupt, sc, &sc->sc_otg.sc_intr_hdl);
 #endif
 	if (err) {
 		sc->sc_otg.sc_intr_hdl = NULL;

Modified: head/sys/dev/usb/controller/ohci.c
==============================================================================
--- head/sys/dev/usb/controller/ohci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/ohci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -115,7 +115,7 @@ struct ohci_std_temp {
 	uint16_t max_frame_size;
 	uint8_t	shortpkt;
 	uint8_t	setup_alt_next;
-	uint8_t	short_frames_ok;
+	uint8_t last_frame;
 };
 
 static struct ohci_hcca *
@@ -1020,6 +1020,23 @@ ohci_check_transfer_sub(struct usb2_xfer
 		usb2_pc_cpu_flush(ed->page_cache);
 
 		DPRINTFN(13, "xfer=%p following alt next\n", xfer);
+
+		/*
+		 * Make sure that the OHCI re-scans the schedule by
+		 * writing the BLF and CLF bits:
+		 */
+
+		if (xfer->xroot->udev->pwr_save.suspended) {
+			/* nothing to do */
+		} else if (xfer->pipe->methods == &ohci_device_bulk_methods) {
+			ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus);
+
+			OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF);
+		} else if (xfer->pipe->methods == &ohci_device_ctrl_methods) {
+			ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus);
+
+			OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF);
+		}
 	}
 }
 
@@ -1034,7 +1051,6 @@ static uint8_t
 ohci_check_transfer(struct usb2_xfer *xfer)
 {
 	ohci_ed_t *ed;
-	uint32_t ed_flags;
 	uint32_t ed_headp;
 	uint32_t ed_tailp;
 
@@ -1043,12 +1059,10 @@ ohci_check_transfer(struct usb2_xfer *xf
 	ed = xfer->qh_start[xfer->flags_int.curr_dma_set];
 
 	usb2_pc_cpu_invalidate(ed->page_cache);
-	ed_flags = le32toh(ed->ed_flags);
 	ed_headp = le32toh(ed->ed_headp);
 	ed_tailp = le32toh(ed->ed_tailp);
 
-	if ((ed_flags & OHCI_ED_SKIP) ||
-	    (ed_headp & OHCI_HALTED) ||
+	if ((ed_headp & OHCI_HALTED) ||
 	    (((ed_headp ^ ed_tailp) & (~0xF)) == 0)) {
 		if (xfer->pipe->methods == &ohci_device_isoc_methods) {
 			/* isochronous transfer */
@@ -1379,10 +1393,9 @@ restart:
 		precompute = 0;
 
 		/* setup alt next pointer, if any */
-		if (temp->short_frames_ok) {
-			if (temp->setup_alt_next) {
-				td_alt_next = td_next;
-			}
+		if (temp->last_frame) {
+			/* no alternate next */
+			td_alt_next = NULL;
 		} else {
 			/* we use this field internally */
 			td_alt_next = td_next;
@@ -1425,8 +1438,8 @@ ohci_setup_standard_chain(struct usb2_xf
 
 	temp.td = NULL;
 	temp.td_next = td;
+	temp.last_frame = 0;
 	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
-	temp.short_frames_ok = xfer->flags_int.short_frames_ok;
 
 	methods = xfer->pipe->methods;
 
@@ -1441,7 +1454,14 @@ ohci_setup_standard_chain(struct usb2_xf
 			temp.len = xfer->frlengths[0];
 			temp.pc = xfer->frbuffers + 0;
 			temp.shortpkt = temp.len ? 1 : 0;
-
+			/* check for last frame */
+			if (xfer->nframes == 1) {
+				/* no STATUS stage yet, SETUP is last */
+				if (xfer->flags_int.control_act) {
+					temp.last_frame = 1;
+					temp.setup_alt_next = 0;
+				}
+			}
 			ohci_setup_standard_chain_sub(&temp);
 
 			/*
@@ -1482,7 +1502,16 @@ ohci_setup_standard_chain(struct usb2_xf
 		x++;
 
 		if (x == xfer->nframes) {
-			temp.setup_alt_next = 0;
+			if (xfer->flags_int.control_xfr) {
+				/* no STATUS stage yet, DATA is last */
+				if (xfer->flags_int.control_act) {
+					temp.last_frame = 1;
+					temp.setup_alt_next = 0;
+				}
+			} else {
+				temp.last_frame = 1;
+				temp.setup_alt_next = 0;
+			}
 		}
 		if (temp.len == 0) {
 
@@ -1523,11 +1552,14 @@ ohci_setup_standard_chain(struct usb2_xf
 		temp.len = 0;
 		temp.pc = NULL;
 		temp.shortpkt = 0;
+		temp.last_frame = 1;
+		temp.setup_alt_next = 0;
 
 		ohci_setup_standard_chain_sub(&temp);
 	}
 	td = temp.td;
 
+	/* Ensure that last TD is terminating: */
 	td->td_next = htole32(OHCI_TD_NEXT_END);
 	td->td_flags &= ~htole32(OHCI_TD_INTR_MASK);
 	td->td_flags |= htole32(OHCI_TD_SET_DI(1));

Modified: head/sys/dev/usb/controller/ohci_atmelarm.c
==============================================================================
--- head/sys/dev/usb/controller/ohci_atmelarm.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/ohci_atmelarm.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -111,10 +111,10 @@ ohci_atmelarm_attach(device_t dev)
 
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(dev, sc->sc_ohci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)ohci_interrupt, sc, &sc->sc_ohci.sc_intr_hdl);
+	    NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_ohci.sc_intr_hdl);
 #else
 	err = bus_setup_intr(dev, sc->sc_ohci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)ohci_interrupt, sc, &sc->sc_ohci.sc_intr_hdl);
+	    (driver_intr_t *)ohci_interrupt, sc, &sc->sc_ohci.sc_intr_hdl);
 #endif
 	if (err) {
 		sc->sc_ohci.sc_intr_hdl = NULL;

Modified: head/sys/dev/usb/controller/ohci_pci.c
==============================================================================
--- head/sys/dev/usb/controller/ohci_pci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/ohci_pci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -289,10 +289,10 @@ ohci_pci_attach(device_t self)
 
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)(void *)ohci_interrupt, sc, &sc->sc_intr_hdl);
+	    NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl);
 #else
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)(void *)ohci_interrupt, sc, &sc->sc_intr_hdl);
+	    (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl);
 #endif
 	if (err) {
 		device_printf(self, "Could not setup irq, %d\n", err);

Modified: head/sys/dev/usb/controller/uhci.c
==============================================================================
--- head/sys/dev/usb/controller/uhci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/uhci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -124,7 +124,7 @@ struct uhci_std_temp {
 	uint16_t max_frame_size;
 	uint8_t	shortpkt;
 	uint8_t	setup_alt_next;
-	uint8_t	short_frames_ok;
+	uint8_t	last_frame;
 };
 
 extern struct usb2_bus_methods uhci_bus_methods;
@@ -1253,30 +1253,33 @@ uhci_check_transfer_sub(struct usb2_xfer
 	td_self = td->td_self;
 	td_alt_next = td->alt_next;
 
-	if ((td->td_token ^ td_token) & htole32(UHCI_TD_SET_DT(1))) {
+	if (xfer->flags_int.control_xfr)
+		goto skip;	/* don't touch the DT value! */
 
-		/*
-	         * The data toggle is wrong and
-	         * we need to switch it !
-	         */
+	if (!((td->td_token ^ td_token) & htole32(UHCI_TD_SET_DT(1))))
+		goto skip;	/* data toggle has correct value */
 
-		while (1) {
+	/*
+	 * The data toggle is wrong and we need to toggle it !
+	 */
+	while (1) {
 
-			td->td_token ^= htole32(UHCI_TD_SET_DT(1));
-			usb2_pc_cpu_flush(td->page_cache);
+		td->td_token ^= htole32(UHCI_TD_SET_DT(1));
+		usb2_pc_cpu_flush(td->page_cache);
 
-			if (td == xfer->td_transfer_last) {
-				/* last transfer */
-				break;
-			}
-			td = td->obj_next;
+		if (td == xfer->td_transfer_last) {
+			/* last transfer */
+			break;
+		}
+		td = td->obj_next;
 
-			if (td->alt_next != td_alt_next) {
-				/* next frame */
-				break;
-			}
+		if (td->alt_next != td_alt_next) {
+			/* next frame */
+			break;
 		}
 	}
+skip:
+
 	/* update the QH */
 	qh->qh_e_next = td_self;
 	usb2_pc_cpu_flush(qh->page_cache);
@@ -1631,10 +1634,8 @@ restart:
 		precompute = 0;
 
 		/* setup alt next pointer, if any */
-		if (temp->short_frames_ok) {
-			if (temp->setup_alt_next) {
-				td_alt_next = td_next;
-			}
+		if (temp->last_frame) {
+			td_alt_next = NULL;
 		} else {
 			/* we use this field internally */
 			td_alt_next = td_next;
@@ -1673,8 +1674,8 @@ uhci_setup_standard_chain(struct usb2_xf
 
 	temp.td = NULL;
 	temp.td_next = td;
+	temp.last_frame = 0;
 	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
-	temp.short_frames_ok = xfer->flags_int.short_frames_ok;
 
 	uhci_mem_layout_init(&temp.ml, xfer);
 
@@ -1707,7 +1708,14 @@ uhci_setup_standard_chain(struct usb2_xf
 			temp.len = xfer->frlengths[0];
 			temp.ml.buf_pc = xfer->frbuffers + 0;
 			temp.shortpkt = temp.len ? 1 : 0;
-
+			/* check for last frame */
+			if (xfer->nframes == 1) {
+				/* no STATUS stage yet, SETUP is last */
+				if (xfer->flags_int.control_act) {
+					temp.last_frame = 1;
+					temp.setup_alt_next = 0;
+				}
+			}
 			uhci_setup_standard_chain_sub(&temp);
 		}
 		x = 1;
@@ -1725,7 +1733,16 @@ uhci_setup_standard_chain(struct usb2_xf
 		x++;
 
 		if (x == xfer->nframes) {
-			temp.setup_alt_next = 0;
+			if (xfer->flags_int.control_xfr) {
+				/* no STATUS stage yet, DATA is last */
+				if (xfer->flags_int.control_act) {
+					temp.last_frame = 1;
+					temp.setup_alt_next = 0;
+				}
+			} else {
+				temp.last_frame = 1;
+				temp.setup_alt_next = 0;
+			}
 		}
 		/*
 		 * Keep previous data toggle,
@@ -1780,11 +1797,14 @@ uhci_setup_standard_chain(struct usb2_xf
 		temp.len = 0;
 		temp.ml.buf_pc = NULL;
 		temp.shortpkt = 0;
+		temp.last_frame = 1;
+		temp.setup_alt_next = 0;
 
 		uhci_setup_standard_chain_sub(&temp);
 	}
 	td = temp.td;
 
+	/* Ensure that last TD is terminating: */
 	td->td_next = htole32(UHCI_PTR_T);
 
 	/* set interrupt bit */

Modified: head/sys/dev/usb/controller/uhci_pci.c
==============================================================================
--- head/sys/dev/usb/controller/uhci_pci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/uhci_pci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -323,10 +323,10 @@ uhci_pci_attach(device_t self)
 
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)(void *)uhci_interrupt, sc, &sc->sc_intr_hdl);
+	    NULL, (driver_intr_t *)uhci_interrupt, sc, &sc->sc_intr_hdl);
 #else
 	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)(void *)uhci_interrupt, sc, &sc->sc_intr_hdl);
+	    (driver_intr_t *)uhci_interrupt, sc, &sc->sc_intr_hdl);
 #endif
 
 	if (err) {

Modified: head/sys/dev/usb/controller/uss820dci.c
==============================================================================
--- head/sys/dev/usb/controller/uss820dci.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/uss820dci.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -836,8 +836,8 @@ uss820dci_setup_standard_chain(struct us
 
 	temp.td = NULL;
 	temp.td_next = xfer->td_start[0];
-	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 	temp.offset = 0;
+	temp.setup_alt_next = xfer->flags_int.short_frames_ok;
 
 	sc = USS820_DCI_BUS2SC(xfer->xroot->bus);
 	ep_no = (xfer->endpoint & UE_ADDR);
@@ -851,6 +851,12 @@ uss820dci_setup_standard_chain(struct us
 			temp.len = xfer->frlengths[0];
 			temp.pc = xfer->frbuffers + 0;
 			temp.short_pkt = temp.len ? 1 : 0;
+			/* check for last frame */
+			if (xfer->nframes == 1) {
+				/* no STATUS stage yet, SETUP is last */
+				if (xfer->flags_int.control_act)
+					temp.setup_alt_next = 0;
+			}
 
 			uss820dci_setup_standard_chain_sub(&temp);
 		}
@@ -878,7 +884,13 @@ uss820dci_setup_standard_chain(struct us
 		x++;
 
 		if (x == xfer->nframes) {
-			temp.setup_alt_next = 0;
+			if (xfer->flags_int.control_xfr) {
+				if (xfer->flags_int.control_act) {
+					temp.setup_alt_next = 0;
+				}
+			} else {
+				temp.setup_alt_next = 0;
+			}
 		}
 		if (temp.len == 0) {
 
@@ -903,37 +915,39 @@ uss820dci_setup_standard_chain(struct us
 		}
 	}
 
-	/* always setup a valid "pc" pointer for status and sync */
-	temp.pc = xfer->frbuffers + 0;
-
-	/* check if we should append a status stage */
-
-	if (xfer->flags_int.control_xfr &&
-	    !xfer->flags_int.control_act) {
+	/* check for control transfer */
+	if (xfer->flags_int.control_xfr) {
 		uint8_t need_sync;
 
-		/*
-		 * Send a DATA1 message and invert the current
-		 * endpoint direction.
-		 */
-		if (xfer->endpoint & UE_DIR_IN) {
-			temp.func = &uss820dci_data_rx;
-			need_sync = 0;
-		} else {
-			temp.func = &uss820dci_data_tx;
-			need_sync = 1;
-		}
+		/* always setup a valid "pc" pointer for status and sync */
+		temp.pc = xfer->frbuffers + 0;
 		temp.len = 0;
 		temp.short_pkt = 0;
+		temp.setup_alt_next = 0;
 
-		uss820dci_setup_standard_chain_sub(&temp);
-		if (need_sync) {
-			/* we need a SYNC point after TX */
-			temp.func = &uss820dci_data_tx_sync;
+		/* check if we should append a status stage */
+		if (!xfer->flags_int.control_act) {
+
+			/*
+			 * Send a DATA1 message and invert the current
+			 * endpoint direction.
+			 */
+			if (xfer->endpoint & UE_DIR_IN) {
+				temp.func = &uss820dci_data_rx;
+				need_sync = 0;
+			} else {
+				temp.func = &uss820dci_data_tx;
+				need_sync = 1;
+			}
 			temp.len = 0;
 			temp.short_pkt = 0;
 
 			uss820dci_setup_standard_chain_sub(&temp);
+			if (need_sync) {
+				/* we need a SYNC point after TX */
+				temp.func = &uss820dci_data_tx_sync;
+				uss820dci_setup_standard_chain_sub(&temp);
+			}
 		}
 	}
 	/* must have at least one frame! */

Modified: head/sys/dev/usb/controller/uss820dci_atmelarm.c
==============================================================================
--- head/sys/dev/usb/controller/uss820dci_atmelarm.c	Fri Mar 20 21:51:27 2009	(r190182)
+++ head/sys/dev/usb/controller/uss820dci_atmelarm.c	Fri Mar 20 21:57:54 2009	(r190183)
@@ -170,10 +170,10 @@ uss820_atmelarm_attach(device_t dev)
 
 #if (__FreeBSD_version >= 700031)
 	err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (void *)uss820dci_interrupt, sc, &sc->sc_intr_hdl);
+	    NULL, (driver_intr_t *)uss820dci_interrupt, sc, &sc->sc_intr_hdl);
 #else
 	err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (void *)uss820dci_interrupt, sc, &sc->sc_intr_hdl);
+	    (driver_intr_t *)uss820dci_interrupt, sc, &sc->sc_intr_hdl);
 #endif
 	if (err) {
 		sc->sc_intr_hdl = NULL;