Date: Sat, 3 Mar 2001 15:03:57 -0600 From: Doug Poland <doug@polands.org> To: freebsd-questions@freebsd.org Subject: SCSI disks / disklabel / vinum Message-ID: <20010303150356.B29412@polands.org>
next in thread | raw e-mail | index | archive | help
Hi,
I'm putting together a vinum disk subsystem.
For testing I started out with 4 SCSI disks
and built a stripped plex and everything
worked great. This config had 2 drives
in the chassis and 2 drives in an external
case.
So I get a 4-connector SCSI cable for the
chassis and add two more SCSI drives (that
I've previously formatted and put ufs on).
FreeBSD 4.2-STABLE boots and recognizes
all the drives (see dmesg at end).
When I edited the disklabel (disklabel -e da4)
I didn't see the
(e: .... 4.2BSD ...)
setting under "unused". I thought that odd
because I've previously formatted, partitioned,
labeled, mounted, and tested every drive.
So I thought I'd let sysinstall have at it
put ufs on again, just to make sure. So
I redo the partitioning and labeling and
I still have vinum running on 4 disks and
the two new ones are mounted separately.
I went to disklabel again and still no
4.2BSD setting.
So now I think it must need to be re-
formatted. So I fire off camcontrol
#camcontrol format da4; camcontrol format da5
and see:
camcontrol: cam_real_open_device: couldn't open passthrough device /dev/pass4
cam_real_open_device: No such file or directory
camcontrol: cam_real_open_device: couldn't open passthrough device /dev/pass5
cam_real_open_device: No such file or directory
Now I'm really confused! Why can I not see the
4.2BSD disklabel? Until I can set that, I won't
be able to create a vinum volume. Ultimately
I want a 7 drive vinum volume but cannot get past
4 drives.
Your help is greatly appreciated...
--
Regards,
Doug
dmsg snippits:
FreeBSD 4.2-STABLE #0: Sat Mar 3 08:57:02 CST 2001
root@judeah.polands.org:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Overdrive Pentium/P55C (180.00-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x1543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
...
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfedfe000-0xfedfefff irq 10 at device 13.0 on pci0
aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs
...
(ahc0:A:0:0): refuses synchronous negotiation. Using asynchronous transfers
(ahc0:A:1:0): refuses synchronous negotiation. Using asynchronous transfers
(ahc0:A:2:0): refuses synchronous negotiation. Using asynchronous transfers
(ahc0:A:3:0): refuses synchronous negotiation. Using asynchronous transfers
(ahc0:A:4:0): refuses synchronous negotiation. Using asynchronous transfers
(ahc0:A:5:0): refuses synchronous negotiation. Using asynchronous transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBMRAID 0664M1H9337 5 58> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 1920MB (3933040 512 byte sectors: 255H 63S/T 244C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBMRAID 0664M1H9337 5 58> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 1920MB (3933040 512 byte sectors: 255H 63S/T 244C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBMRAID 0664M1H9337 5 58> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da2: 1920MB (3933040 512 byte sectors: 255H 63S/T 244C)
da3 at ahc0 bus 0 target 3 lun 0
da3: <IBMRAID 0664M1H9337 5 58> Fixed Direct Access SCSI-2 device
da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da3: 1920MB (3933040 512 byte sectors: 255H 63S/T 244C)
da5 at ahc0 bus 0 target 5 lun 0
da5: <IBMRAID 0664M1H9337 5 58> Fixed Direct Access SCSI-2 device
da5: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da5: 1920MB (3933040 512 byte sectors: 255H 63S/T 244C)
da4 at ahc0 bus 0 target 4 lun 0
da4: <IBMRAID 0664M1H9337 5 58> Fixed Direct Access SCSI-2 device
da4: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da4: 1920MB (3933040 512 byte sectors: 255H 63S/T 244C)
camcontrol:
#camcontrol devlist -v
scbus0 on ahc0 bus 0:
<IBMRAID 0664M1H9337 5 58> at scbus0 target 0 lun 0 (pass0,da0)
<IBMRAID 0664M1H9337 5 58> at scbus0 target 1 lun 0 (pass1,da1)
<IBMRAID 0664M1H9337 5 58> at scbus0 target 2 lun 0 (pass2,da2)
<IBMRAID 0664M1H9337 5 58> at scbus0 target 3 lun 0 (pass3,da3)
<IBMRAID 0664M1H9337 5 58> at scbus0 target 4 lun 0 (pass4,da4)
<IBMRAID 0664M1H9337 5 58> at scbus0 target 5 lun 0 (pass5,da5)
< > at scbus0 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010303150356.B29412>