Date: Tue, 2 Jan 2001 16:50:03 -0800 (PST) From: "Claude LeFrancois (LMC)" <lmcclef@lmc.ericsson.se> To: freebsd-bugs@FreeBSD.org Subject: Re: i386/23681: keyboard is not working when the laptop is docked Message-ID: <200101030050.f030o3P36190@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/23681; it has been noted by GNATS.
From: "Claude LeFrancois (LMC)" <lmcclef@lmc.ericsson.se>
To: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
Cc: freebsd-gnats-submit@FreeBSD.ORG,
"Claude LeFrancois (LMC)" <lmcclef@lmc.ericsson.se>
Subject: Re: i386/23681: keyboard is not working when the laptop is docked
Date: Tue, 02 Jan 2001 16:51:38 -0500
This is a multi-part message in MIME format.
--------------CF9D36FF15137DE2C658B599
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Kazutaka YOKOTA wrote:
> Hi,
>
Hello Kasu,
>
> >I have applied your patch, recompiled and installed the kernel. Unfortunately,
> >this new kernel doesn't seem to fix the problem. I had similar kernel messages
> >. I
> >send them to you as an attachment to this message.
>
> You provided two copies of demsg output. In the first one, the AT keyboard
> seems to be working. Is this when you run the system without the docking
> station?
>
Both dmesg outputs come from the laptop running with the docking station. The
first one comes from the second keyboard (KB-9956, which is working fine) and the
second one comes from the keyboard that gives me problems.
>
> In the second dmesg output the AT keyboard failed to reset.
>
> Ok. Another suggestion. Set the flags 0x3 to atkbd in you kernel
> configuration file:
>
> device atkbd0 at atkbdc? irq 1 flags 0x3
>
> This will avoid resetting the keyboard when the kernel starts.
>
This setting brings my "bad" keyboard to work !!! See the attachment.
>
> >The keyboard is a 104 key PS/2 Compaq keyboard. There is no model number on it
> >.
> >Only FCC ID and compliance logos can be seen on the keyboard. I have the Compa
> >q
> >spare part number (269513-001) and some other strings without any references
> >(RT235BTW, DOMESTIC 166516-006 and 123754-201 A).
> >
> >I have tested successfully another 104 key PS/2 keyboard. This one has a model
> >number: KB-9956. It is working properly with the docking station. In the kerne
> >l
> >messages I send you, you can see a boot sequence with the keyboard driver load
> >ed
> >properly.
> >
> >I have tested the not working keyboard with a Windows and a Linux computers. I
> >t is
> >working with these systems. I guess the keyboard is not the problem... Maybe t
> >he
> >keyboard controller ?
>
> Um, well, sort of, perhaps. Our kernel may be having difficulty
> in communicating with the keyboard via the docking station. The keyboard
> controller in the notebook computers sometimes have slightly different
> features and exhibit different behavior than the keyboard controller
> on the normal mothorboard...
>
> >Thanks for your help,
> >
> >Claude.
> [...]
>
> >Copyright (c) 1992-2000 The FreeBSD Project.
> >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > The Regents of the University of California. All rights reserved.
> >FreeBSD 4.2-RELEASE #1: Thu Dec 21 20:15:08 EST 2000
> > root@lmcpc118634.pc:/usr/src/sys/compile/LMC
> >Calibrating clock(s) ... TSC clock: 266706126 Hz, i8254 clock: 1193316 Hz
> >CLK_USE_I8254_CALIBRATION not specified - using default frequency
> [...]
>
> >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> >atkbd: the current kbd controller command byte 0065
> >atkbd: keyboard ID 0x41ab (2)
> >kbdc: RESET_KBD return code:00fa
> >kbdc: RESET_KBD status:00aa
> >kbd0 at atkbd0
> >kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> [...]
>
> This looks good.
>
> >syncing disks... 4 4 4 4
> >done
> >Uptime: 1d1h46m21s
> >Rebooting...
> >Copyright (c) 1992-2000 The FreeBSD Project.
> >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > The Regents of the University of California. All rights reserved.
> >FreeBSD 4.2-RELEASE #1: Thu Dec 21 20:15:08 EST 2000
> > root@lmcpc118634.pc:/usr/src/sys/compile/LMC
> >Calibrating clock(s) ... TSC clock: 266706966 Hz, i8254 clock: 1193319 Hz
> >CLK_USE_I8254_CALIBRATION not specified - using default frequency
> >Timecounter "i8254" frequency 1193182 Hz
> [...]
>
> >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> >atkbd: the current kbd controller command byte 0065
> >atkbd: keyboard ID 0x41ab (2)
> >kbdc: RESET_KBD return code:ffffffff
> >kbdc: RESET_KBD return code:ffffffff
> >kbdc: RESET_KBD return code:00fa
> >kbdc: RESET_KBD status:00fa
> >kbdc: DIAGNOSE status:0055
> >kbdc: TEST_KBD_PORT status:0000
> >atkbd: failed to reset the keyboard.
> >device_probe_and_attach: atkbd0 attach returned 6
> [...]
>
> This is bad ;-<
>
> Kazu
Thanks again for your help !!!
Claude.
Claude Lefrancois
Ericsson Research Canada
lmcclef@lmc.ericsson.se
--------------CF9D36FF15137DE2C658B599
Content-Type: text/plain; charset=us-ascii;
name="freebsd-dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="freebsd-dmesg.txt"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Tue Jan 2 18:44:09 EST 2001
root@lmcpc118634.pc:/usr/src/sys/compile/LMC-TEST
Calibrating clock(s) ... TSC clock: 266706614 Hz, i8254 clock: 1193318 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134176768 (131032K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00499000 - 0x07fedfff, 129323008 bytes (31573 pages)
avail memory = 126046208 (123092K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x474
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4ef2 Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID b9b0110e
Other BIOS signatures found:
ACPI: 000ffed0
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=ae6c0e11)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=ae6c0e11)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x0e11, dev=0xae6c, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 50000000, size 28
map[14]: type 1, range 32, base 44000000, size 12
found-> vendor=0x0e11, dev=0xae6c, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=1 secondarybus=1
found-> vendor=0x0e11, dev=0xae35, revid=0x10
class=02-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00001010, size 4
map[14]: type 1, range 32, base 44100000, size 4
found-> vendor=0x104c, dev=0xac16, revid=0x02
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=2 secondarybus=2
intpin=a, irq=11
map[10]: type 1, range 32, base 7fffe000, size 12
found-> vendor=0x104c, dev=0xac16, revid=0x02
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=3 secondarybus=3
intpin=a, irq=11
map[10]: type 1, range 32, base 7ffff000, size 12
found-> vendor=0x0e11, dev=0xae69, revid=0x03
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x0e11, dev=0xae33, revid=0x01
class=01-01-ea, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 00001000, size 4
found-> vendor=0x0e11, dev=0xa0f8, revid=0x11
class=0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 44080000, size 12
found-> vendor=0x0e11, dev=0xae2b, revid=0x04
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x0e11, dev=0xae33, revid=0x03
class=01-01-da, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 00001020, size 4
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=0e11 device=ae6c)> at device 0.1 on pci0
found-> vendor=0x5333, dev=0x8c01, revid=0x06
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 40000000, size 26
pci1: <PCI bus> on pcib1
pci1: <S3 ViRGE MX graphics accelerator> (vendor=0x5333, dev=0x8c01) at 0.0
tl0: <Compaq NetFlex-3/P Integrated> port 0x1010-0x101f mem 0x44100000-0x4410000f irq 11 at device 10.0 on pci0
tl0: Ethernet address: 00:08:c7:37:22:f7
miibus0: <MII bus> on tl0
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI, 10baseT, 10baseT-FDX, auto
bpf: tl0 attached
pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 12.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: ac16104c 02100003 06070002 00824208
10: 7fffe000 020000a0 00020200 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: b0480e11 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 20449060 00000080 01898181 00000000
90: 60640280 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000006: 00000000: 30000410: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 12.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
PCI Config space:
00: ac16104c 02100003 06070002 00824208
10: 7ffff000 020000a0 00030300 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: b0480e11 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 20449060 00000080 01898181 00000000
90: 60640280 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000000: 00000000: 30000006: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
isab0: <PCI to ISA bridge (vendor=0e11 device=ae69)> at device 14.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0x1000-0x100f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 14.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=14 b=eb
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1008
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
ohci0: <OHCI (generic) USB controller> mem 0x44080000-0x44080fff irq 11 at device 14.2 on pci0
ohci0: (New OHCI DeviceId=0xa0f80e11)
using shared irq11.
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab1: <PCI to ISA bridge (vendor=0e11 device=ae2b)> at device 15.0 on pci0
atapci1: <Generic PCI ATA controller> port 0x1020-0x102f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 15.1 on pci0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata2: probe allocation failed
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x1028
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
eisa0: <EISA bus> on motherboard
mainboard0: <DH@0000 (System Board)> on eisa0 slot 0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata5: mask=00 status0=ff status1=ff
ata5: probe allocation failed
ata5 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
adv0 failed to probe at port 0x330 on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x3 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x3, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 90 03 3c
psm: data 08 00 00
psm: status 00 00 28
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
stat is 4c
stat is 0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0x200
sio1: irq maps: 0x41 0x241 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
sbc0: <ESS 688> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1879 detected, newspeed
pcm: setmap 8000, 1000; 0xc7b5e000 -> 8000
pcm: setmap 9000, 1000; 0xc7b5f000 -> 9000
isa_probe_children: probing PnP devices
BIOS Geometries:
0:022aef3f 0..554=555 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 684840, tty 6310ba, net 6718ba
bpf: sl0 attached
Creating DISK ad0
Creating DISK wd0
ad0: <IBM-DKLA-24320/KL4UA47A> ATA-4 disk at ata0-master
ad0: 4108MB (8415225 sectors), 8905 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, BIOSDMA
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4108MB <IBM-DKLA-24320> [8905/15/63] at ata0-master BIOSDMA
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <CD-ROM CDR_U240/2.18> CDROM drive at ata0 as slave
acd0: read 1722KB/s (4037KB/s), 256KB buffer, PIO4
acd0: Reads: CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
Slot 0 chg = 0x4
ad0s1: type 0xa5, start 30240, end = 8406719, size 8376480 : OK
ad0s3: type 0x12, start 63, end = 30239, size 30177 : OK
start_init: trying /sbin/init
pcic: I/O win 0 flags 17 240-24f
pcic: I/O win 0 flags 7 240-24f
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 10 slot 0 on pccard0
pcic: I/O win 0 flags 17 240-24f
ep0: Ethernet address 00:10:5a:8a:cb:e4
bpf: ep0 attached
splash: image decoder found: fade_saver
Linux-ELF exec handler installed
--------------CF9D36FF15137DE2C658B599--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200101030050.f030o3P36190>