Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 23 Dec 2006 04:20:18 GMT
From:      Mark Jacobs <jacobsm@gate.net>
To:        freebsd-ports-bugs@FreeBSD.org
Subject:   Re: ports/107121: GraphicsMagick 1.1.7 does not build
Message-ID:  <200612230420.kBN4KInr012262@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR ports/107121; it has been noted by GNATS.

From: Mark Jacobs <jacobsm@gate.net>
To: Rong-En Fan <rafan@infor.org>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: ports/107121: GraphicsMagick 1.1.7 does not build
Date: Fri, 22 Dec 2006 23:03:07 -0500

 On Sat, 2006-12-23 at 10:21 +0800, Rong-En Fan wrote:
 > On Sat, Dec 23, 2006 at 01:00:58AM +0000, Mark Jacobs wrote:
 > > Building GraphicsMagick 1.1.7 port fails with the following error;
 > > 
 > > png.c: In function `ReadOnePNGImage':
 > > png.c:1712: warning: implicit declaration of function `png_access_version'
 > > png.c:1721: error: `png_ptr' undeclared (first use in this function)
 > > png.c:1721: error: (Each undeclared identifier is reported only once
 > > png.c:1721: error: for each function it appears in.)
 > > *** Error code 1
 > > 
 > > Stop in /usr/ports/graphics/GraphicsMagick/work/GraphicsMagick-1.1.7/coders.
 > > *** Error code 1
 > 
 > Could you show us your make.conf?
 > 
 > Thanks,
 > Rong-En Fan
 
 Here it is
 
 # added by use.perl 2006-12-06 18:05:22
 PERL_VER=5.8.8
 PERL_VERSION=5.8.8
 # $FreeBSD: src/share/examples/etc/make.conf,v 1.265.2.8 2006/09/13
 08:39:16 des Exp $
 #
 # NOTE:  Please would any committer updating this file also update the
 # make.conf(5) manual page, if necessary, which is located in
 # src/share/man/man5/make.conf.5.
 #
 # /etc/make.conf, if present, will be read by make (see
 # /usr/share/mk/sys.mk).  It allows you to override macro definitions
 # to make without changing your source tree, or anything the source
 # tree installs.
 #
 # This file must be in valid Makefile syntax.
 #
 # There are additional things you can put into /etc/make.conf.
 # You have to find those in the Makefiles and documentation of
 # the source tree.
 #
 # Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR
 # from make.conf (or as command line variables to make).
 # Both variables are environment variables for make and must be used as:
 #
 # env MAKEOBJDIRPREFIX=/big/directory make
 #
 #
 # The CPUTYPE variable controls which processor should be targeted for
 # generated code.  This controls processor-specific optimizations in
 # certain code (currently only OpenSSL) as well as modifying the value
 # of CFLAGS to contain the appropriate optimization directive to gcc.
 # The automatic setting of CFLAGS may be overridden using the
 # NO_CPU_CFLAGS variable below.
 # Currently the following CPU types are recognized:
 #   Intel x86 architecture:
 #       (AMD CPUs)      opteron athlon64 athlon-mp athlon-xp athlon-4
 #                       athlon-tbird athlon k8 k6-3 k6-2 k6 k5
 #       (Intel CPUs)    nocona pentium4[m] prescott pentium3[m]
 pentium-m
 #                       pentium2 pentiumpro pentium-mmx pentium i486
 i386
 #       (Via CPUs)      c3 c3-2
 #   Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4
 #   AMD64 architecture: opteron, athlon64, nocona
 #   Intel ia64 architecture: itanium2, itanium
 #
 # (?= allows to buildworld for a different CPUTYPE.)
 #
 CPUTYPE=athlon-xp
 #NO_CPU_CFLAGS=         # Don't add -march=<cpu> to CFLAGS automatically
 #NO_CPU_COPTFLAGS=      # Don't add -march=<cpu> to COPTFLAGS
 automatically
 #
 # CFLAGS controls the compiler settings used when compiling C code.
 # Note that optimization settings other than -O and -O2 are not
 recommended
 # or supported for compiling the world or the kernel - please revert any
 # nonstandard optimization settings to "-O" or -O2 before submitting bug
 # reports without patches to the developers.
 #
 CFLAGS= -O2 -pipe
 #
 # CXXFLAGS controls the compiler settings used when compiling C++ code.
 # Note that CXXFLAGS is initially set to the value of CFLAGS.  If you
 wish
 # to add to CXXFLAGS value, "+=" must be used rather than "=".  Using
 "="
 # alone will remove the often needed contents of CFLAGS from CXXFLAGS.
 #
 #CXXFLAGS+= -fconserve-space
 #
 # MAKE_SHELL controls the shell used internally by make(1) to process
 the
 # command scripts in makefiles.  Three shells are supported, sh, ksh,
 and
 # csh.  Using sh is most common, and advised.  Using ksh *may* work, but
 is
 # not guaranteed to.  Using csh is absurd.  The default is to use sh.
 #
 #MAKE_SHELL?=sh
 #
 # BDECFLAGS are a set of gcc warning settings that Bruce Evans has
 suggested
 # for use in developing FreeBSD and testing changes.  They can be used
 by
 # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf.  -Wconversion is not
 # included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
 #
 #BDECFLAGS=     -W -Wall -ansi -pedantic -Wbad-function-cast
 -Wcast-align \
 #               -Wcast-qual -Wchar-subscripts -Winline \
 #               -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
 #               -Wredundant-decls -Wshadow -Wstrict-prototypes
 -Wwrite-strings
 #
 # To compile just the kernel with special optimizations, you should use
 # this instead of CFLAGS (which is not applicable to kernel builds
 anyway).
 # There is very little to gain by using higher optimization levels, and
 doing
 # so can cause problems.
 #
 COPTFLAGS= -O2 -pipe
 #
 # Compare before install
 #INSTALL=install -C
 #
 # Mtree will follow symlinks
 #MTREE_FOLLOWS_SYMLINKS= -L
 #
 # To enable installing ssh(1) with the setuid bit turned on
 #ENABLE_SUID_SSH=
 #
 # To enable installing newgrp(1) with the setuid bit turned on.
 # Without the setuid bit, newgrp cannot change users' groups.
 #ENABLE_SUID_NEWGRP=
 #
 # To avoid building various parts of the base system:
 #NO_ACPI=               # do not build acpiconf(8) and related programs
 #NO_ATM=                # do not build ATM related programs and
 libraries
 #NO_AUTHPF=             # do not build and install authpf (setuid/gid)
 #NO_BLUETOOTH=          # do not build Bluetooth related stuff
 #NO_BOOT=               # do not build boot blocks and loader
 #NO_CRYPT=              # do not build any crypto code
 #NO_CVS=                # do not build CVS
 #NO_CXX=                # do not build C++ and friends
 #NO_DICT=               # do not build the Webster dictionary files
 #NO_DYNAMICROOT=        # do not link /bin and /sbin dynamically
 #NO_FORTRAN=            # do not build g77 and related libraries
 #NO_GAMES=              # do not build games (games/ subdir)
 #NO_GDB=                # do not build GDB
 #NO_GPIB=               # do not build GPIB support
 #NO_I4B=                # do not build isdn4bsd package
 #NO_INET6=              # do not build IPv6 related programs and
 libraries
 #NO_INFO=               # do not make or install info files
 #NO_IPFILTER=           # do not build IP Filter package
 #NO_KERBEROS=           # do not build and install Kerberos 5 (KTH
 Heimdal)
 #NO_LIBC_R=             # do not build libc_r (re-entrant version of
 libc)
 #NO_LIBPTHREAD=         # do not build libpthread (M:N threading
 library)
 #NO_LIBTHR=             # do not build libthr (1:1 threading library)
 NO_LPR=YES              # do not build lpr and related programs
 #NO_MAILWRAPPER=        # do not build the mailwrapper(8) MTA selector
 #NO_MAN=                # do not build manual pages
 #NO_MODULES=            # do not build modules with the kernel
 #NO_NETCAT=             # do not build netcat
 #NO_NIS=                # do not build NIS support and related programs.
 #                       # If NO_NIS is set, you might need to adopt your
 #                       # nsswitch.conf(5) and remove `nis' entries.
 #NO_NLS_CATALOGS=       # do not build NLS catalog support for csh(1)
 #NO_OBJC=               # do not build Objective C support
 #NO_OPENSSH=            # do not build OpenSSH
 #NO_OPENSSL=            # do not build OpenSSL (implies
 NO_KERBEROS/NO_OPENSSH)
 #NO_PF=                 # do not build PF firewall package
 #NO_PROFILE=            # Avoid compiling profiled libraries
 #NO_RCMDS=              # do not build or install BSD r* commands (rsh,
 etc).
 #NO_SENDMAIL=           # do not build sendmail and related programs
 #NO_SHARE=              # do not go into the share subdir
 #NO_SHARED=             # build /bin and /sbin statically linked (bad
 idea)
 #NO_SHAREDOCS=          # do not build the 4.4BSD legacy docs
 #NO_TCSH=               # do not build and install /bin/csh (which is
 tcsh)
 #NO_TOOLCHAIN=          # do not build programs for program development
 #NO_USB=                # do not build usbd(8) and related programs
 #
 # Variables that control how ppp(8) is built.
 #PPP_NO_NAT=            # do not build with NAT support (see
 make.conf(5))
 #PPP_NO_NETGRAPH=       # do not build with Netgraph support
 #PPP_NO_RADIUS=         # do not build with RADIUS support
 #PPP_NO_SUID=           # build with normal permissions
 #
 #TRACEROUTE_NO_IPSEC=   # do not build traceroute(8) with IPSEC support
 #
 # Variables to control whether parts of the base BIND are built.
 # Defining NO_BIND makes all of the following BIND variables obsolete.
 # Please see the more detailed descriptions in make.conf(5).
 #NO_BIND=               # Do not build any part of BIND
 #NO_BIND_DNSSEC=        # Do not build dnssec-keygen, dnssec-signzone
 #NO_BIND_ETC=           # Do not install files to /etc/namedb
 #NO_BIND_LIBS_LWRES=    # Do not install the lwres library
 #NO_BIND_MTREE=         # Do not run mtree to create chroot directories
 #NO_BIND_NAMED=         # Do not build named, rndc, lwresd, etc.
 #NO_BIND_UTILS=         # Do not build dig, host, nslookup, nsupdate
 #WITH_BIND_LIBS=        # Install the BIND libs and include files
 #
 # To build sys/modules when building the world (our old way of doing
 things)
 #MODULES_WITH_WORLD=    # do not build modules when building kernel
 #
 # The list of modules to build instead of all of them.
 #MODULES_OVERRIDE=      linux ipfw
 #
 # The list of modules to never build, applied *after* MODULES_OVERRIDE.
 #WITHOUT_MODULES=       bktr plip
 #
 # The following controls building optional IDEA code in libcrypto and
 # certain ports.  Patents are involved - you must not use this unless
 # you either have a license or fall within patent 'fair use'
 # provisions.
 #
 # *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
 #
 # IDEA is patented in the USA and many European countries - thought to
 # be OK to use for any non-commercial use.  This is optional.
 #MAKE_IDEA=             # IDEA (128 bit symmetric encryption)
 #
 # If you do not want unformatted manual pages to be compressed
 # when they are installed:
 #
 #NO_MANCOMPRESS=
 #
 #
 # Default format for system documentation, depends on your printer.
 # Set this to "ascii" for simple printers or screen
 #
 PRINTERDEVICE=  ps
 #
 #
 # How long to wait for a console keypress before booting the default
 kernel.
 # This value is approximately in milliseconds. Keypresses are accepted
 by the
 # BIOS before booting from disk, making it possible to give custom boot
 # parameters even when this is set to 0.
 #
 #BOOTWAIT=0
 #BOOTWAIT=30000
 #
 # By default, the system will always use the keyboard/video card as
 system
 # console.  However, the boot blocks may be dynamically configured to
 use a
 # serial port in addition to or instead of the keyboard/video console.
 #
 # By default we use COM1 as our serial console port *if* we're going to
 use
 # a serial port as our console at all.  Alter as necessary.
 #
 #   COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
 #
 #BOOT_COMCONSOLE_PORT=  0x3F8
 #
 # The default serial console speed is 9600.  Set the speed to a larger
 value
 # for better interactive response.
 #
 #BOOT_COMCONSOLE_SPEED= 115200
 #
 # By default the 'pxeboot' loader retrieves the kernel via NFS.
 Defining
 # this and recompiling /usr/src/sys/boot will cause it to retrieve the
 kernel
 # via TFTP.  This allows pxeboot to load a custom BOOTP diskless kernel
 yet
 # still mount the server's '/' (i.e. rather than load the server's
 kernel).
 #
 #LOADER_TFTP_SUPPORT= YES
 #
 #
 # Kerberos 5 su (k5su)
 # If you want to use the k5su utility, define this to have it installed
 # set-user-ID.
 #ENABLE_SUID_K5SU=
 #
 #
 # CVSup update flags.  Edit SUPFILE settings to reflect whichever
 distribution
 # file(s) you use on your site (see /usr/share/examples/cvsup/README for
 more
 # information on CVSup and these files).  To use, do "make update"
 in /usr/src.
 #
 #SUP_UPDATE=
 #
 #SUP=            /usr/bin/csup
 #SUPFLAGS=       -g -L 2
 #SUPHOST=        cvsup.uk.FreeBSD.org
 #SUPFILE=        /usr/share/examples/cvsup/standard-supfile
 #PORTSSUPFILE=   /usr/share/examples/cvsup/ports-supfile
 #DOCSUPFILE=     /usr/share/examples/cvsup/doc-supfile
 #
 # top(1) uses a hash table for the user names.  The size of this hash
 # can be tuned to match the number of local users.  The table size
 should
 # be a prime number approximately twice as large as the number of lines
 in
 # /etc/passwd.  The default number is 20011.
 #
 #TOP_TABLE_SIZE= 101
 #
 # Documentation
 #
 # The list of languages and encodings to build and install
 #
 DOC_LANG=       en_US.ISO8859-1
 #
 #
 # sendmail
 #
 # The following sets the default m4 configuration file to use at
 # install time.  Use with caution as a make install will overwrite
 # any existing /etc/mail/sendmail.cf.  Note that SENDMAIL_CF is now
 # deprecated.  The value should be a fully qualified path name.
 #
 #SENDMAIL_MC=/etc/mail/myconfig.mc
 #
 # The following sets the default m4 configuration file for mail
 # submission to use at install time.  Use with caution as a make
 # install will overwrite any existing /etc/mail/submit.cf.  The
 # value should be a fully qualified path name.
 #
 #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
 #
 # If you need to build additional .cf files during a make buildworld,
 # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
 #
 #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
 #
 # The following overrides the default location for the m4 configuration
 # files used to build a .cf file from a .mc file.
 #
 #SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf
 #
 # Setting the following variable modifies the flags passed to m4 when
 # building a .cf file from a .mc file.  It can be used to enable
 # features disabled by default.
 #
 #SENDMAIL_M4_FLAGS=
 #
 # Setting the following variables modifies the build environment for
 # sendmail and its related utilities. For example, SASL support can be
 # added with settings such as:
 #
 #    with SASLv1:
 #       SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
 #       SENDMAIL_LDFLAGS=-L/usr/local/lib
 #       SENDMAIL_LDADD=-lsasl
 #
 #    with SASLv2:
 #       SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
 #       SENDMAIL_LDFLAGS=-L/usr/local/lib
 #       SENDMAIL_LDADD=-lsasl2
 #
 # Note: If you are using Cyrus SASL with other applications which
 require
 #       access to the sasldb file, you should add the following to your
 #       sendmail.mc file:
 #
 #       define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
 #
 #SENDMAIL_CFLAGS=
 #SENDMAIL_LDFLAGS=
 #SENDMAIL_LDADD=
 #SENDMAIL_DPADD=
 #
 # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
 # set-user-ID root binary instead of a set-group-ID smmsp binary and
 will
 # prevent the installation of /etc/mail/submit.cf.
 # This is a deprecated mode of operation.  See etc/mail/README for more
 # information.
 #
 #SENDMAIL_SET_USER_ID=
 #
 # The permissions to use on alias and map databases generated using
 # /etc/mail/Makefile.  Defaults to 0640.
 #
 #SENDMAIL_MAP_PERMS=
 #
 # wpa_supplicant
 #
 # Set this to disable building 802.1X and EAP support in wpa_supplicant.
 #
 #NO_WPA_SUPPLICANT_EAPOL=true
 
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612230420.kBN4KInr012262>