Date: Sun, 21 Mar 2004 00:10:50 +0200 From: "Simone Karol" <simone@lka.co.za> To: <freebsd-questions@FreeBSD.ORG> Subject: Kouwell Raid controler - drive not picked up Message-ID: <000001c40ec8$342f7530$251e010a@lka.co.za>
next in thread | raw e-mail | index | archive | help
Good day to you! I have a problem with my raid controler - it picks up fine, but i cannot see the drive(s) Here is some out put that might help - a# uname -r 4.9-STABLE a# dmesg | grep atapci atapci0: <SiI 0680 ATA133 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 mem 0xdf000000-0xdf0000ff irq 2 at device 11.0 on pci0 ata2: at 0xc000 on atapci0 ata3: at 0xc800 on atapci0 atapci1: <VIA 8235 ATA133 controller> port 0xe000-0xe00f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 I also have this: pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 11 - but im not sure what card this is. When i go to /stand/sysinstall i only see : Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad0s1a 128990 45564 73108 38% / /dev/ad0s1f 257998 17814 219546 8% /tmp /dev/ad0s1g 10998570 1344974 8773712 13% /usr /dev/ad0s1e 257998 3512 233848 1% /var procfs 4 4 0 100% /proc the machine has 3 drives - one dedicated to the OS (normal ide) - the other two are connected to the raid card (pci IDE) - the raid set completed and is working fine (i would presume) - but i cannot see the drive(s) in freebsd, so i cannot work with it. Please guys, i need to get this sorted out and i have no clue how. Thank you in advance for the help - Regards Winston mailto:winston/at/lka.co.za
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c40ec8$342f7530$251e010a>