Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 16 Oct 2004 11:07:32 -0500
From:      Nicolas de Bari <nbari@unixmexico.com>
To:        freebsd-current@freebsd.org
Subject:   nvidia drivers system crash
Message-ID:  <1097942852.37658.2.camel@localhost>

next in thread | raw e-mail | index | archive | help
Hi list.

I am having strange problems with FreeBSD 5.X.

my system:

dell latidud D800.
pentium M 1.7ghz.
BIOS A11.
WUXGA nvidia GeForce FX 5200 32M.

The problem:

Using FreeBSD 5.2.1 or FreeBSD 5.3 BETA 7 with Xorg or XFree86 if y type
any of the following commands :

X -xf86config /root/xorg.conf.new
XFree86 -xf86config /root/XF86Config.new 
startx or xdm 
 
My system crash and i can't do nothing, the X is never up, the screan
just shows few lines like :
(this only happends with nvidia driver not with the nv)

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: FreeBSD 5.3 i386 [ELF]
Current Operating System: FreeBSD laptop.unixmexico.net 5.3-BETA7
FreeBSD 5.3-BETA7 #1: Fri Oct 15 09:44:03 CDT 2004    
root@laptop.unixmexico.net:/usr/obj/usr/src/sys/D800 i386
Build Date: 02 October 2004
    Before reporting problems, check http://wiki.X.Org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 10:30:18 2004


ctrl+sup, ctrl+c, nothing responds also i have try to "shutdown -r 5
min" and then try to start the X but the system just crash and never
reboots, I need to press the poweroff button thats the only thing that
work.

When using FreeBSD 4.10 the driver works perfectly with out problems,
but i would like to use FreeBSD 5.X because of my wirless card. the one
works great with the ndis method.

On FreeBSD 5.X I have tryed with using a kernel with and without device
agp, and installed the nvidia-drivers from the ports with a simple "make
install clean".

a dmesg on a FreeBSD 5.3 looks like (without device agp):
---
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 5.3-BETA7 #1: Fri Oct 15 09:44:03 CDT 2004
    root@laptop.unixmexico.net:/usr/obj/usr/src/sys/D800
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.56-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
 
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory  = 536535040 (511 MB)
avail memory = 511172608 (487 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R  > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX Go5200> mem
0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f
irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f
irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f
irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem
0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0f:1f:25:d7:5e
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <1394 Open Host Controller Interface> mem
0xfafe8000-0xfafebfff,0xfafef800-0xfafeffff irq 11 at device 1.2 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 32:4f:c0:00:2a:92:dc:a1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:92:dc:a1
fwe0: Ethernet address: 32:4f:c0:92:dc:a1
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <base peripheral> at device 1.3 (no driver attached)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 5 at device
 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 1698563602 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized.  Default = block all, Logging = enabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cpu0: Performance states changed
ad0: 76319MB <HTS548080M9AT00/MG4OA53A> [155061/16/63] at ata0-master
UDMA100
acd0: CDRW <SONY CD-RW/DVD-ROM CRX830E/KDK3> at ata1-master UDMA33
wi0: <SMC SMC2632W> at port 0xd000-0xd03f irq 11 function 0 config 1 on
pccard0
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary (0.3.0), Station (0.7.6)
wi0: Ethernet address: 00:04:e2:1e:0d:2e
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY CDRW/DVD CRX830E KDK3> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [332722 x 2048 byte records]
Mounting root from ufs:/dev/ad0s2a
---

# sysctl -a hw.nvidia.registry
hw.nvidia.registry.EnableVia4x: 0
hw.nvidia.registry.EnableALiAGP: 0
hw.nvidia.registry.NvAGP: 1
hw.nvidia.registry.EnableAGPSBA: 0
hw.nvidia.registry.EnableAGPFW: 0
hw.nvidia.registry.SoftEDIDs: 1
hw.nvidia.registry.Mobile: 4294967295
hw.nvidia.registry.ResmanDebugLevel: 4294967295
hw.nvidia.registry.FlatPanelMode: 0

on the /boot/loder.conf i have something like this:
snd_ich_load="YES"
linux_load="YES"
nvidia_load="YES"

also i have try the options shown in here:
http://gerda.univie.ac.at/freebsd-laptops/index.pl?action=show_laptop_detail&laptop=255

but always the system crash, for last i am attaching the actual kernel
that i am using:

# kernel for laptop LATITUDE | D800
machine     i386
cpu         I686_CPU
ident       D800
# makeoptions   DEBUG=-g        #Build kernel with gdb(1) debug symbols

options     SCHED_4BSD      #4BSD scheduler
options     INET            #InterNETworking
options     INET6           #IPv6 communications protocols
options     FFS         #Berkeley Fast Filesystem
options     SOFTUPDATES     #Enable FFS soft updates support
options     UFS_ACL         #Support for access control lists
options     UFS_DIRHASH     #Improve performance on big directories
options     MD_ROOT         #MD is a potential root device
options     NFSCLIENT       #Network Filesystem Client
options     NFSSERVER       #Network Filesystem Server
options     NFS_ROOT        #NFS usable as /, requires NFSCLIENT
options     MSDOSFS         #MSDOS Filesystem
options     CD9660          #ISO 9660 Filesystem
options     PROCFS          #Process filesystem (requires PSEUDOFS)
options     PSEUDOFS        #Pseudo-filesystem framework
options     GEOM_GPT        #GUID Partition Tables.
options     COMPAT_43       #Compatible with BSD 4.3 [KEEP THIS!]
options     COMPAT_FREEBSD4     #Compatible with FreeBSD4
options     SCSI_DELAY=15000    #Delay (in ms) before probing SCSI
options     KTRACE          #ktrace(1) support
options     SYSVSHM         #SYSV-style shared memory
options     SYSVMSG         #SYSV-style message queues
options     SYSVSEM         #SYSV-style semaphores
options     _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time
extensions
options     KBD_INSTALL_CDEV    # install a CDEV entry in /dev
options     AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                    # output.  Adds ~128k to driver.
options     AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                    # output.  Adds ~215k to driver.
options     ADAPTIVE_GIANT      # Giant mutex is adaptive.

# Bus support.  Do not remove isa, even if you have no isa slots
device      isa
device      eisa
device      pci

# Floppy drives
device      fdc

# ATA and ATAPI devices
device      ata
device      atadisk         # ATA disk drives
device      ataraid         # ATA RAID drives
device      atapicd         # ATAPI CDROM drives
#device     atapifd         # ATAPI floppy drives
#device     atapist         # ATAPI tape drives
options     ATA_STATIC_ID       #Static device numbering

# SCSI peripherals
device      scbus       # SCSI bus (required for SCSI)
device      ch      # SCSI media changers
device      da      # Direct Access (disks)
device      sa      # Sequential Access (tape etc)
device      cd      # CD
device      pass        # Passthrough device (direct SCSI access)
device      ses     # SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device      atkbdc      # AT keyboard controller
device      atkbd       # AT keyboard
device      psm     # PS/2 mouse

device      vga     # VGA video card driver

device      splash      # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device      sc

# Enable this for the pcvt (VT220 compatible) console driver
#device     vt
#options    XSERVER         # support for X server on a vt console
#options    FAT_CURSOR      # start with block cursor

# device        agp     # support several AGP chipsets

# Floating point support - do not disable.
device      npx

# Power management support (see NOTES for more options)
# device        apm
# Add suspend/resume support for the i8254.
device      pmtimer

# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device      cbb         # cardbus (yenta) bridge
#device     pcic            # ExCA ISA and PCI bridges
device      pccard          # PC Card (16-bit) bus
device      cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
device      sio     # 8250, 16[45]50 based serial ports

# Parallel port
device      ppc
device      ppbus       # Parallel port bus (required)
device      lpt     # Printer
device      plip        # TCP/IP over parallel
device      ppi     # Parallel port interface device
#device     vpo     # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device      miibus      # MII bus support
device      bge     # Broadcom BCM570xx Gigabit Ethernet

# Wireless NIC cards
device      wlan        # 802.11 support
device      an      # Aironet 4500/4800 802.11 wireless NICs.
device      awi     # BayStack 660 and others
device      wi      # WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices - the number indicates how many units to allocate.
device      loop        # Network loopback
device      mem     # Memory and kernel memory devices
device      io      # I/O device
device      random  # Entropy device
device      ether   # Ethernet support
device      sl      # Kernel SLIP
device      ppp     # Kernel PPP
device      tun     # Packet tunnel.
device      pty     # Pseudo-ttys (telnet etc)
device      md      # Memory "disks"
device      gif     # IPv6 and IPv4 tunneling
device      faith   # IPv6-to-IPv4 relaying (translation)
device      snp
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device      bpf     # Berkeley packet filter

# USB support
device      uhci        # UHCI PCI->USB interface
device      ohci        # OHCI PCI->USB interface
device      usb     # USB Bus (required)
#device     udbp        # USB Double Bulk Pipe devices
device      ugen        # Generic
device      uhid        # "Human Interface Devices"
device      ukbd        # Keyboard
device      ulpt        # Printer
device      umass       # Disks/Mass storage - Requires scbus and da
device      ums     # Mouse
device      uscanner    # Scanners
device      urio        # Diamond Rio 500 MP3 player

# FireWire support
device      firewire    # FireWire bus code
device      sbp     # SCSI over FireWire (Requires scbus and da)
device      fwe     # Ethernet over FireWire (non-standard!)

# video
options     SC_PIXEL_MODE
options     VGA_WIDTH90
options     VESA

# ipfilter
options     IPFILTER
options     IPFILTER_LOG
options     IPFILTER_DEFAULT_BLOCK
options     IPSTEALTH

# Using the ATAPI/CAM Driver CDBurner
device atapicam


Any ideas of what could it be wrong or what do i need to make the nvidia
drivers to work?

thanks in advance.





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1097942852.37658.2.camel>