Date: Thu, 9 Feb 2012 13:48:32 +0400 From: Slawa Olhovchenkov <slw@zxy.spb.ru> To: Marius Strobl <marius@alchemy.franken.de> Cc: freebsd-scsi@freebsd.org Subject: Re: Trouble with LSI SAS1078 Message-ID: <20120209094832.GD93570@zxy.spb.ru> In-Reply-To: <20120207231818.GA39861@alchemy.franken.de> References: <20120130215227.GR1684@zxy.spb.ru> <20120131232938.GM39861@alchemy.franken.de> <20120207092647.GD84338@zxy.spb.ru> <20120207201217.GX39861@alchemy.franken.de> <20120207203121.GF84338@zxy.spb.ru> <20120207204255.GY39861@alchemy.franken.de> <20120207205750.GG84338@zxy.spb.ru> <20120207213253.GZ39861@alchemy.franken.de> <20120207220325.GH84338@zxy.spb.ru> <20120207231818.GA39861@alchemy.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--EVF5PPMfhYS0aIcm Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Wed, Feb 08, 2012 at 12:18:18AM +0100, Marius Strobl wrote: > On Wed, Feb 08, 2012 at 02:03:25AM +0400, Slawa Olhovchenkov wrote: > > On Tue, Feb 07, 2012 at 10:32:53PM +0100, Marius Strobl wrote: > > > > > On Wed, Feb 08, 2012 at 12:57:50AM +0400, Slawa Olhovchenkov wrote: > > > > On Tue, Feb 07, 2012 at 09:42:55PM +0100, Marius Strobl wrote: > > > > > > > > > > > > I can test you patch at this machine (currently installed on USB HDD). > > > > > > > > > > > > > > Okay, could please give the following patch a try? > > > > > > > http://people.freebsd.org/~marius/mpt_sas1078.diff > > > > > > > > > > > > On first look its working! > > > > > > Many strange messages in dmesg (Error 6, Unretryable error; Unexpected > > > > > > Bus Free; etc). Delay on load driver (kern.cam.scsi_delay may be?). > > > > > > > > > > > > I can read first 100 secrors from da1 and da2. > > > > > > > > > > > > > > > > Some delay of maybe 2-4 seconds when mpt(4) is attaching is normal. > > > > > > > > No, delay is 12.40s. > > > > > > Hrm, could you please change the SAS1078 part in mpt_hard_reset() of > > > mpt.c to look like the following, i.e. add the printf()'s: > > > if (mpt->is_1078) { > > > printf("%s: reg before=0x%x\n", __func__, > > > mpt_read(mpt, MPT_OFFSET_RESET_1078)); > > > mpt_write(mpt, MPT_OFFSET_RESET_1078, 0x07); > > > DELAY(1000); > > > printf("%s: reg after=0x%x\n", __func__, > > > mpt_read(mpt, MPT_OFFSET_RESET_1078)); > > > return; > > > } > > > > > > and report the values printed during attach of mpt(4) with the above > > > compiled in? > > > > don't print anything. and i don't see 'hard reset' message in verbose boot. > > > > > Okay, so apart from the lengthy delay during attach it looks good so > > > far. Do you have any problems using the disks? > > > > I didn't try realy using. > > The clutter in the verbose dmesg might be from an enclosure that > either only fully comes up when actually booting from a disk > attached to the SAS1078 or isn't properly supported by ses(4), > delaying the path inquiry. I'd suggest to try to boot from disk > and to leave out the ses(4) driver. I am try using SAS1078: - mptutil working, RAID1 created. - raid1 rebuild working - boot from array working Now system boot from SAS1078 and working! verbose dmesg attached. --EVF5PPMfhYS0aIcm Content-Type: text/plain; charset=us-ascii; name="dmesg-mpt2.txt" Content-Disposition: attachment; filename="dmesg-mpt2.txt" l APIC 51 as a target INTR: Adding local APIC 52 as a target INTR: Adding local APIC 53 as a target FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 16 cpu7 (AP): APIC ID: 17 cpu8 (AP): APIC ID: 18 cpu9 (AP): APIC ID: 19 cpu10 (AP): APIC ID: 20 cpu11 (AP): APIC ID: 21 cpu12 (AP): APIC ID: 32 cpu13 (AP): APIC ID: 33 cpu14 (AP): APIC ID: 34 cpu15 (AP): APIC ID: 35 cpu16 (AP): APIC ID: 36 cpu17 (AP): APIC ID: 37 cpu18 (AP): APIC ID: 48 cpu19 (AP): APIC ID: 49 cpu20 (AP): APIC ID: 50 cpu21 (AP): APIC ID: 51 cpu22 (AP): APIC ID: 52 cpu23 (AP): APIC ID: 53 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 12 APIC: CPU 2 has ACPI ID 2 APIC: CPU 3 has ACPI ID 14 APIC: CPU 4 has ACPI ID 4 APIC: CPU 5 has ACPI ID 16 APIC: CPU 6 has ACPI ID 6 APIC: CPU 7 has ACPI ID 18 APIC: CPU 8 has ACPI ID 8 APIC: CPU 9 has ACPI ID 20 APIC: CPU 10 has ACPI ID 10 APIC: CPU 11 has ACPI ID 22 APIC: CPU 12 has ACPI ID 1 APIC: CPU 13 has ACPI ID 13 APIC: CPU 14 has ACPI ID 3 APIC: CPU 15 has ACPI ID 15 APIC: CPU 16 has ACPI ID 5 APIC: CPU 17 has ACPI ID 17 APIC: CPU 18 has ACPI ID 7 APIC: CPU 19 has ACPI ID 19 APIC: CPU 20 has ACPI ID 9 APIC: CPU 21 has ACPI ID 21 APIC: CPU 22 has ACPI ID 11 APIC: CPU 23 has ACPI ID 23 lapic0: CMCI unmasked x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x001000-0x001fff at 0xffffff8000361000 x86bios: EBDA 0x09b000-0x09ffff at 0xfffffe000009b000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ULE: setup cpu 4 ULE: setup cpu 5 ULE: setup cpu 6 ULE: setup cpu 7 ULE: setup cpu 8 ULE: setup cpu 9 ULE: setup cpu 10 ULE: setup cpu 11 ULE: setup cpu 12 ULE: setup cpu 13 ULE: setup cpu 14 ULE: setup cpu 15 ULE: setup cpu 16 ULE: setup cpu 17 ULE: setup cpu 18 ULE: setup cpu 19 ULE: setup cpu 20 ULE: setup cpu 21 ULE: setup cpu 22 ULE: setup cpu 23 ACPI: RSDP 0xf0410 00024 (v02 INTEL ) ACPI: XSDT 0x8f7fd120 00094 (v01 INTEL S5520UR 00000000 01000013) ACPI: FACP 0x8f7fb000 000F4 (v04 INTEL S5520UR 00000000 MSFT 0100000D) ACPI: DSDT 0x8f7f4000 065A1 (v02 INTEL S5520UR 00000003 MSFT 0100000D) ACPI: FACS 0x8f6f1000 00040 ACPI: APIC 0x8f7f3000 001A8 (v02 INTEL S5520UR 00000000 MSFT 0100000D) ACPI: MCFG 0x8f7f2000 0003C (v01 INTEL S5520UR 00000001 MSFT 0100000D) ACPI: HPET 0x8f7f1000 00038 (v01 INTEL S5520UR 00000001 MSFT 0100000D) ACPI: SLIT 0x8f7f0000 00030 (v01 INTEL S5520UR 00000001 MSFT 0100000D) ACPI: SRAT 0x8f7ef000 00430 (v02 INTEL S5520UR 00000001 MSFT 0100000D) ACPI: SPCR 0x8f7ee000 00050 (v01 INTEL S5520UR 00000000 MSFT 0100000D) ACPI: WDDT 0x8f7ed000 00040 (v01 INTEL S5520UR 00000000 MSFT 0100000D) ACPI: SSDT 0x8f7d2000 1AFC4 (v02 INTEL SSDT PM 00004000 INTL 20061109) ACPI: SSDT 0x8f7d1000 001D8 (v02 INTEL IPMI 00004000 INTL 20061109) ACPI: HEST 0x8f7d0000 000A8 (v01 INTEL S5520UR 00000001 INTL 00000001) ACPI: BERT 0x8f7cf000 00030 (v01 INTEL S5520UR 00000001 INTL 00000001) ACPI: ERST 0x8f6f0000 00230 (v01 INTEL S5520UR 00000001 INTL 00000001) ACPI: EINJ 0x8f6ef000 00130 (v01 INTEL S5520UR 00000001 INTL 00000001) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec90000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: level lapic0: LINT1 polarity: high lapic32: Routing NMI -> LINT1 lapic32: LINT1 trigger: level lapic32: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: level lapic2: LINT1 polarity: high lapic34: Routing NMI -> LINT1 lapic34: LINT1 trigger: level lapic34: LINT1 polarity: high lapic4: Routing NMI -> LINT1 lapic4: LINT1 trigger: level lapic4: LINT1 polarity: high lapic36: Routing NMI -> LINT1 lapic36: LINT1 trigger: level lapic36: LINT1 polarity: high lapic16: Routing NMI -> LINT1 lapic16: LINT1 trigger: level lapic16: LINT1 polarity: high lapic48: Routing NMI -> LINT1 lapic48: LINT1 trigger: level lapic48: LINT1 polarity: high lapic18: Routing NMI -> LINT1 lapic18: LINT1 trigger: level lapic18: LINT1 polarity: high lapic50: Routing NMI -> LINT1 lapic50: LINT1 trigger: level lapic50: LINT1 polarity: high lapic20: Routing NMI -> LINT1 lapic20: LINT1 trigger: level lapic20: LINT1 polarity: high lapic52: Routing NMI -> LINT1 lapic52: LINT1 trigger: level lapic52: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: level lapic1: LINT1 polarity: high lapic33: Routing NMI -> LINT1 lapic33: LINT1 trigger: level lapic33: LINT1 polarity: high lapic3: Routing NMI -> LINT1 lapic3: LINT1 trigger: level lapic3: LINT1 polarity: high lapic35: Routing NMI -> LINT1 lapic35: LINT1 trigger: level lapic35: LINT1 polarity: high lapic5: Routing NMI -> LINT1 lapic5: LINT1 trigger: level lapic5: LINT1 polarity: high lapic37: Routing NMI -> LINT1 lapic37: LINT1 trigger: level lapic37: LINT1 polarity: high lapic17: Routing NMI -> LINT1 lapic17: LINT1 trigger: level lapic17: LINT1 polarity: high lapic49: Routing NMI -> LINT1 lapic49: LINT1 trigger: level lapic49: LINT1 polarity: high lapic19: Routing NMI -> LINT1 lapic19: LINT1 trigger: level lapic19: LINT1 polarity: high lapic51: Routing NMI -> LINT1 lapic51: LINT1 trigger: level lapic51: LINT1 polarity: high lapic21: Routing NMI -> LINT1 lapic21: LINT1 trigger: level lapic21: LINT1 polarity: high lapic53: Routing NMI -> LINT1 lapic53: LINT1 trigger: level lapic53: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger cpu0 BSP: ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> nfslock: pseudo-device 001.000005 netmap_memory_init [1565] netmap_buffer_base 0xffffff917b0d7000 (offset 1351680) 001.000006 netmap_memory_init [1574] Have 257 MB, use 1317KB for rings, 131070 buffers at 0xffffff917b0d7000 netmap: loaded module with 257 Mbytes null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ctl: CAM Target Layer loaded acpi0: <INTEL S5520UR> on motherboard PCIe: Memory Mapped configuration base @ 0xa0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: Power Button (fixed) ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 cpu8: <ACPI CPU> on acpi0 cpu9: <ACPI CPU> on acpi0 cpu10: <ACPI CPU> on acpi0 cpu11: <ACPI CPU> on acpi0 cpu12: <ACPI CPU> on acpi0 cpu13: <ACPI CPU> on acpi0 cpu14: <ACPI CPU> on acpi0 cpu15: <ACPI CPU> on acpi0 cpu16: <ACPI CPU> on acpi0 cpu17: <ACPI CPU> on acpi0 cpu18: <ACPI CPU> on acpi0 cpu19: <ACPI CPU> on acpi0 cpu20: <ACPI CPU> on acpi0 cpu21: <ACPI CPU> on acpi0 cpu22: <ACPI CPU> on acpi0 cpu23: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xc4000-0xcbfff pcib0: decoding 3 range 0xfed40000-0xfedfffff pcib0: decoding 3 range 0xb0000000-0xfdffffff pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3406, revid=0x22 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0140, statreg=0x0810, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks pcib0: matched entry for 0.0.INTA pcib0: slot 0 INTA hardwired to IRQ 47 found-> vendor=0x8086, dev=0x3408, revid=0x22 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 28 found-> vendor=0x8086, dev=0x340a, revid=0x22 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 24 found-> vendor=0x8086, dev=0x340c, revid=0x22 domain=0, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks pcib0: matched entry for 0.5.INTA pcib0: slot 5 INTA hardwired to IRQ 26 found-> vendor=0x8086, dev=0x340e, revid=0x22 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 30 found-> vendor=0x8086, dev=0x3410, revid=0x22 domain=0, bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks pcib0: matched entry for 0.9.INTA pcib0: slot 9 INTA hardwired to IRQ 32 found-> vendor=0x8086, dev=0x3411, revid=0x22 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 33 found-> vendor=0x8086, dev=0x3425, revid=0x22 domain=0, bus=0, slot=16, func=0 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3426, revid=0x22 domain=0, bus=0, slot=16, func=1 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3427, revid=0x22 domain=0, bus=0, slot=17, func=0 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3428, revid=0x22 domain=0, bus=0, slot=17, func=1 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x342d, revid=0x22 domain=0, bus=0, slot=19, func=0 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xb1e23000, size 12, enabled pcib0: allocated type 3 (0xb1e23000-0xb1e23fff) for rid 10 of pci0:0:19:0 found-> vendor=0x8086, dev=0x342e, revid=0x22 domain=0, bus=0, slot=20, func=0 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3422, revid=0x22 domain=0, bus=0, slot=20, func=1 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3423, revid=0x22 domain=0, bus=0, slot=20, func=2 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3438, revid=0x22 domain=0, bus=0, slot=20, func=3 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x342f, revid=0x22 domain=0, bus=0, slot=21, func=0 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3430, revid=0x22 domain=0, bus=0, slot=22, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e00000, size 14, enabled pcib0: allocated type 3 (0xb1e00000-0xb1e03fff) for rid 10 of pci0:0:22:0 pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 43 found-> vendor=0x8086, dev=0x3431, revid=0x22 domain=0, bus=0, slot=22, func=1 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e04000, size 14, enabled pcib0: allocated type 3 (0xb1e04000-0xb1e07fff) for rid 10 of pci0:0:22:1 pcib0: matched entry for 0.22.INTB pcib0: slot 22 INTB hardwired to IRQ 44 found-> vendor=0x8086, dev=0x3432, revid=0x22 domain=0, bus=0, slot=22, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e08000, size 14, enabled pcib0: allocated type 3 (0xb1e08000-0xb1e0bfff) for rid 10 of pci0:0:22:2 pcib0: matched entry for 0.22.INTC pcib0: slot 22 INTC hardwired to IRQ 45 found-> vendor=0x8086, dev=0x3433, revid=0x22 domain=0, bus=0, slot=22, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e0c000, size 14, enabled pcib0: allocated type 3 (0xb1e0c000-0xb1e0ffff) for rid 10 of pci0:0:22:3 pcib0: matched entry for 0.22.INTD pcib0: slot 22 INTD hardwired to IRQ 46 found-> vendor=0x8086, dev=0x3429, revid=0x22 domain=0, bus=0, slot=22, func=4 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e10000, size 14, enabled pcib0: allocated type 3 (0xb1e10000-0xb1e13fff) for rid 10 of pci0:0:22:4 pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 43 found-> vendor=0x8086, dev=0x342a, revid=0x22 domain=0, bus=0, slot=22, func=5 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e14000, size 14, enabled pcib0: allocated type 3 (0xb1e14000-0xb1e17fff) for rid 10 of pci0:0:22:5 pcib0: matched entry for 0.22.INTB pcib0: slot 22 INTB hardwired to IRQ 44 found-> vendor=0x8086, dev=0x342b, revid=0x22 domain=0, bus=0, slot=22, func=6 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e18000, size 14, enabled pcib0: allocated type 3 (0xb1e18000-0xb1e1bfff) for rid 10 of pci0:0:22:6 pcib0: matched entry for 0.22.INTC pcib0: slot 22 INTC hardwired to IRQ 45 found-> vendor=0x8086, dev=0x342c, revid=0x22 domain=0, bus=0, slot=22, func=7 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xb1e1c000, size 14, enabled pcib0: allocated type 3 (0xb1e1c000-0xb1e1ffff) for rid 10 of pci0:0:22:7 pcib0: matched entry for 0.22.INTD pcib0: slot 22 INTD hardwired to IRQ 46 found-> vendor=0x8086, dev=0x3a37, revid=0x00 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[20]: type I/O Port, range 32, base 0x40c0, size 5, enabled pcib0: allocated type 4 (0x40c0-0x40df) for rid 20 of pci0:0:26:0 pcib0: matched entry for 0.26.INTD pcib0: slot 26 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a38, revid=0x00 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[20]: type I/O Port, range 32, base 0x40a0, size 5, enabled pcib0: allocated type 4 (0x40a0-0x40bf) for rid 20 of pci0:0:26:1 pcib0: matched entry for 0.26.INTD pcib0: slot 26 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a39, revid=0x00 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled pcib0: allocated type 4 (0x4080-0x409f) for rid 20 of pci0:0:26:2 pcib0: matched entry for 0.26.INTD pcib0: slot 26 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a3c, revid=0x00 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xb1e21000, size 10, enabled pcib0: allocated type 3 (0xb1e21000-0xb1e213ff) for rid 10 of pci0:0:26:7 pcib0: matched entry for 0.26.INTD pcib0: slot 26 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a40, revid=0x00 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a48, revid=0x00 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0810, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1b (6750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a4a, revid=0x00 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3a34, revid=0x00 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled pcib0: allocated type 4 (0x4060-0x407f) for rid 20 of pci0:0:29:0 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a35, revid=0x00 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled pcib0: allocated type 4 (0x4040-0x405f) for rid 20 of pci0:0:29:1 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a36, revid=0x00 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled pcib0: allocated type 4 (0x4020-0x403f) for rid 20 of pci0:0:29:2 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a3a, revid=0x00 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xb1e20000, size 10, enabled pcib0: allocated type 3 (0xb1e20000-0xb1e203ff) for rid 10 of pci0:0:29:7 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x244e, revid=0x90 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x0a (2500 ns) found-> vendor=0x8086, dev=0x3a16, revid=0x00 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a20, revid=0x00 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x4138, size 3, enabled pcib0: allocated type 4 (0x4138-0x413f) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0x414c, size 2, enabled pcib0: allocated type 4 (0x414c-0x414f) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0x4130, size 3, enabled pcib0: allocated type 4 (0x4130-0x4137) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0x4148, size 2, enabled pcib0: allocated type 4 (0x4148-0x414b) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0x4110, size 4, enabled pcib0: allocated type 4 (0x4110-0x411f) for rid 20 of pci0:0:31:2 map[24]: type I/O Port, range 32, base 0x4100, size 4, enabled pcib0: allocated type 4 (0x4100-0x410f) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a30, revid=0x00 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[10]: type Memory, range 64, base 0xb1e22000, size 8, enabled pcib0: allocated type 3 (0xb1e22000-0xb1e220ff) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0x4000, size 5, enabled pcib0: allocated type 4 (0x4000-0x401f) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a26, revid=0x00 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x4128, size 3, enabled pcib0: allocated type 4 (0x4128-0x412f) for rid 10 of pci0:0:31:5 map[14]: type I/O Port, range 32, base 0x4144, size 2, enabled pcib0: allocated type 4 (0x4144-0x4147) for rid 14 of pci0:0:31:5 map[18]: type I/O Port, range 32, base 0x4120, size 3, enabled pcib0: allocated type 4 (0x4120-0x4127) for rid 18 of pci0:0:31:5 map[1c]: type I/O Port, range 32, base 0x4140, size 2, enabled pcib0: allocated type 4 (0x4140-0x4143) for rid 1c of pci0:0:31:5 map[20]: type I/O Port, range 32, base 0x40f0, size 4, enabled pcib0: allocated type 4 (0x40f0-0x40ff) for rid 20 of pci0:0:31:5 map[24]: type I/O Port, range 32, base 0x40e0, size 4, enabled pcib0: allocated type 4 (0x40e0-0x40ef) for rid 24 of pci0:0:31:5 pcib0: matched entry for 0.31.INTD pcib0: slot 31 INTD hardwired to IRQ 21 pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0 pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xb1d00000-0xb1dfffff) for rid 20 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xb1d00000-0xb1dfffff pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0x10a7, revid=0x02 domain=0, bus=1, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 10 messages in map 0x1c map[10]: type Memory, range 32, base 0xb1d20000, size 17, enabled pcib1: allocated memory range (0xb1d20000-0xb1d3ffff) for rid 10 of pci0:1:0:0 map[18]: type I/O Port, range 32, base 0x3020, size 5, enabled pcib1: allocated I/O port range (0x3020-0x303f) for rid 18 of pci0:1:0:0 map[1c]: type Memory, range 32, base 0xb1d44000, size 14, enabled pcib1: allocated memory range (0xb1d44000-0xb1d47fff) for rid 1c of pci0:1:0:0 pcib1: matched entry for 1.0.INTB pcib1: slot 0 INTB hardwired to IRQ 40 found-> vendor=0x8086, dev=0x10a7, revid=0x02 domain=0, bus=1, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 10 messages in map 0x1c map[10]: type Memory, range 32, base 0xb1d00000, size 17, enabled pcib1: allocated memory range (0xb1d00000-0xb1d1ffff) for rid 10 of pci0:1:0:1 map[18]: type I/O Port, range 32, base 0x3000, size 5, enabled pcib1: allocated I/O port range (0x3000-0x301f) for rid 18 of pci0:1:0:1 map[1c]: type Memory, range 32, base 0xb1d40000, size 14, enabled pcib1: allocated memory range (0xb1d40000-0xb1d43fff) for rid 1c of pci0:1:0:1 pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 28 igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.1> port 0x3020-0x303f mem 0xb1d20000-0xb1d3ffff,0xb1d44000-0xb1d47fff irq 40 at device 0.0 on pci1 igb0: attempting to allocate 5 MSI-X vectors (10 supported) msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 msi: routing MSI-X IRQ 257 to local APIC 0 vector 50 msi: routing MSI-X IRQ 258 to local APIC 0 vector 51 msi: routing MSI-X IRQ 259 to local APIC 0 vector 52 msi: routing MSI-X IRQ 260 to local APIC 0 vector 53 igb0: using IRQs 256-260 for MSI-X igb0: Using MSIX interrupts with 5 vectors igb0: bpf attached igb0: Ethernet address: 00:1e:67:08:cc:38 igb0: Link is up 1000 Mbps Full Duplex igb0: PHY reset is blocked due to SOL/IDER session. 001.000009 netmap_attach [1275] ok for igb0 igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.1> port 0x3000-0x301f mem 0xb1d00000-0xb1d1ffff,0xb1d40000-0xb1d43fff irq 28 at device 0.1 on pci1 igb1: attempting to allocate 5 MSI-X vectors (10 supported) msi: routing MSI-X IRQ 261 to local APIC 0 vector 54 msi: routing MSI-X IRQ 262 to local APIC 0 vector 55 msi: routing MSI-X IRQ 263 to local APIC 0 vector 56 msi: routing MSI-X IRQ 264 to local APIC 0 vector 57 msi: routing MSI-X IRQ 265 to local APIC 0 vector 58 igb1: using IRQs 261-265 for MSI-X igb1: Using MSIX interrupts with 5 vectors igb1: bpf attached igb1: Ethernet address: 00:1e:67:08:cc:39 001.000010 netmap_attach [1275] ok for igb1 pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 pcib3: <ACPI PCI-PCI bridge> irq 26 at device 5.0 on pci0 pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib3 pcib0: allocated type 3 (0xb1b00000-0xb1cfffff) for rid 20 of pcib3 pcib0: allocated type 3 (0xb1900000-0xb19fffff) for rid 24 of pcib3 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 8 pcib3: I/O decode 0x2000-0x2fff pcib3: memory decode 0xb1b00000-0xb1cfffff pcib3: prefetched decode 0xb1900000-0xb19fffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x111d, dev=0x806a, revid=0x02 domain=0, bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 pcib4: <PCI-PCI bridge> at device 0.0 on pci3 pcib3: allocated I/O port range (0x2000-0x2fff) for rid 1c of pcib4 pcib3: allocated memory range (0xb1b00000-0xb1cfffff) for rid 20 of pcib4 pcib3: allocated prefetch range (0xb1900000-0xb19fffff) for rid 24 of pcib4 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 8 pcib4: I/O decode 0x2000-0x2fff pcib4: memory decode 0xb1b00000-0xb1cfffff pcib4: prefetched decode 0xb1900000-0xb19fffff pci4: <PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x111d, dev=0x806a, revid=0x02 domain=0, bus=4, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x111d, dev=0x806a, revid=0x02 domain=0, bus=4, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib5: <PCI-PCI bridge> at device 2.0 on pci4 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: no prefetched decode pci5: <PCI bus> on pcib5 pci5: domain=0, physical bus=5 pcib6: <PCI-PCI bridge> at device 4.0 on pci4 pcib4: allocated I/O port range (0x2000-0x2fff) for rid 1c of pcib6 pcib4: allocated memory range (0xb1b00000-0xb1cfffff) for rid 20 of pcib6 pcib4: allocated prefetch range (0xb1900000-0xb19fffff) for rid 24 of pcib6 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 8 pcib6: I/O decode 0x2000-0x2fff pcib6: memory decode 0xb1b00000-0xb1cfffff pcib6: prefetched decode 0xb1900000-0xb19fffff pci6: <PCI bus> on pcib6 pci6: domain=0, physical bus=6 found-> vendor=0x8086, dev=0x10fb, revid=0x01 domain=0, bus=6, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks MSI-X supports 64 messages in map 0x20 map[10]: type Prefetchable Memory, range 64, base 0xb1900000, size 19, enabled pcib6: allocated prefetch range (0xb1900000-0xb197ffff) for rid 10 of pci0:6:0:0 map[18]: type I/O Port, range 32, base 0x2000, size 5, enabled pcib6: allocated I/O port range (0x2000-0x201f) for rid 18 of pci0:6:0:0 map[20]: type Prefetchable Memory, range 64, base 0xb1980000, size 14, enabled pcib6: allocated prefetch range (0xb1980000-0xb1983fff) for rid 20 of pci0:6:0:0 pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 26 pcib4: slot 4 INTA is routed to irq 26 pcib6: slot 0 INTA is routed to irq 26 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.4.5> port 0x2000-0x201f mem 0xb1900000-0xb197ffff,0xb1980000-0xb1983fff irq 26 at device 0.0 on pci6 ix0: attempting to allocate 9 MSI-X vectors (64 supported) msi: routing MSI-X IRQ 266 to local APIC 0 vector 59 msi: routing MSI-X IRQ 267 to local APIC 0 vector 60 msi: routing MSI-X IRQ 268 to local APIC 0 vector 61 msi: routing MSI-X IRQ 269 to local APIC 0 vector 62 msi: routing MSI-X IRQ 270 to local APIC 0 vector 63 msi: routing MSI-X IRQ 271 to local APIC 0 vector 64 msi: routing MSI-X IRQ 272 to local APIC 0 vector 65 msi: routing MSI-X IRQ 273 to local APIC 0 vector 66 msi: routing MSI-X IRQ 274 to local APIC 0 vector 67 ix0: using IRQs 266-274 for MSI-X ix0: Using MSIX interrupts with 9 vectors ix0: RX Descriptors exceed system mbuf max, using default instead! ix0: bpf attached ix0: Ethernet address: 00:1b:21:62:a3:e2 ix0: PCI Express Bus: Speed 5.0Gb/s Width x8 001.000011 netmap_attach [1275] ok for ix0 pcib7: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0 pcib7: domain 0 pcib7: secondary bus 9 pcib7: subordinate bus 12 pcib7: no prefetched decode pci9: <ACPI PCI bus> on pcib7 pci9: domain=0, physical bus=9 found-> vendor=0x111d, dev=0x806a, revid=0x02 domain=0, bus=9, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 pcib8: <PCI-PCI bridge> at device 0.0 on pci9 pcib8: domain 0 pcib8: secondary bus 10 pcib8: subordinate bus 12 pcib8: no prefetched decode pci10: <PCI bus> on pcib8 pci10: domain=0, physical bus=10 found-> vendor=0x111d, dev=0x806a, revid=0x02 domain=0, bus=10, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x111d, dev=0x806a, revid=0x02 domain=0, bus=10, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib9: <PCI-PCI bridge> at device 2.0 on pci10 pcib9: domain 0 pcib9: secondary bus 11 pcib9: subordinate bus 11 pcib9: no prefetched decode pci11: <PCI bus> on pcib9 pci11: domain=0, physical bus=11 pcib10: <PCI-PCI bridge> at device 4.0 on pci10 pcib10: domain 0 pcib10: secondary bus 12 pcib10: subordinate bus 12 pcib10: no prefetched decode pci12: <PCI bus> on pcib10 pci12: domain=0, physical bus=12 pcib11: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0 pcib11: domain 0 pcib11: secondary bus 13 pcib11: subordinate bus 13 pcib11: no prefetched decode pci13: <ACPI PCI bus> on pcib11 pci13: domain=0, physical bus=13 pcib12: <ACPI PCI-PCI bridge> irq 33 at device 10.0 on pci0 pcib12: domain 0 pcib12: secondary bus 14 pcib12: subordinate bus 14 pcib12: no prefetched decode pci14: <ACPI PCI bus> on pcib12 pci14: domain=0, physical bus=14 pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) pci0: <base peripheral> at device 22.0 (no driver attached) pci0: <base peripheral> at device 22.1 (no driver attached) pci0: <base peripheral> at device 22.2 (no driver attached) pci0: <base peripheral> at device 22.3 (no driver attached) pci0: <base peripheral> at device 22.4 (no driver attached) pci0: <base peripheral> at device 22.5 (no driver attached) pci0: <base peripheral> at device 22.6 (no driver attached) pci0: <base peripheral> at device 22.7 (no driver attached) uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x40c0-0x40df irq 19 at device 26.0 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 68 uhci0: LegSup = 0x3000 usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0 usbus0: bpf attached uhci0: usbpf: Attached uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x40a0-0x40bf irq 19 at device 26.1 on pci0 usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1 usbus1: bpf attached uhci1: usbpf: Attached uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x4080-0x409f irq 19 at device 26.2 on pci0 usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2 usbus2: bpf attached uhci2: usbpf: Attached ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xb1e21000-0xb1e213ff irq 19 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 usbus3: bpf attached ehci0: usbpf: Attached pcib13: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib0: allocated type 4 (0x1000-0x1fff) for rid 1c of pcib13 pcib0: allocated type 3 (0xb1a00000-0xb1afffff) for rid 20 of pcib13 pcib13: domain 0 pcib13: secondary bus 15 pcib13: subordinate bus 15 pcib13: I/O decode 0x1000-0x1fff pcib13: memory decode 0xb1a00000-0xb1afffff pcib13: no prefetched decode pci15: <ACPI PCI bus> on pcib13 pci15: domain=0, physical bus=15 found-> vendor=0x1000, dev=0x0062, revid=0x04 domain=0, bus=15, slot=0, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D3 current D0 MSI supports 4 messages, 64 bit MSI-X supports 4 messages in map 0x10 map[10]: type Memory, range 64, base 0xb1a40000, size 14, enabled pcib13: allocated memory range (0xb1a40000-0xb1a43fff) for rid 10 of pci0:15:0:0 map[18]: type I/O Port, range 32, base 0x1000, size 8, enabled pcib13: allocated I/O port range (0x1000-0x10ff) for rid 18 of pci0:15:0:0 map[1c]: type Memory, range 64, base 0xb1a00000, size 18, enabled pcib13: allocated memory range (0xb1a00000-0xb1a3ffff) for rid 1c of pci0:15:0:0 pcib13: matched entry for 15.0.INTA pcib13: slot 0 INTA hardwired to IRQ 16 mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0xb1a40000-0xb1a43fff,0xb1a00000-0xb1a3ffff irq 16 at device 0.0 on pci15 pci15: child mpt0 requested type 4 for rid 0x14, but the BAR says it is an memio mpt0: unable to map registers in PIO mode ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 69 mpt0: MPI Version=1.5.20.0 mpt0: chain depth limited to 34 (from 2040) mpt0: Maximum Segment Count: 306, Maximum CAM Segment Count: 33 mpt0: MsgLength=20 IOCNumber = 0 mpt0: IOCFACTS: GlobalCredits=276 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34 mpt0: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2 mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x21 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x21 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0xb (ACK not required). mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 ) mpt0: 1 Active Volume (2 Max) mpt0: 2 Hidden Drive Members (14 Max) mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). pcib14: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pcib0: allocated type 3 (0xb1000000-0xb18fffff) for rid 20 of pcib14 pcib0: allocated type 3 (0xb0000000-0xb0ffffff) for rid 24 of pcib14 pcib14: domain 0 pcib14: secondary bus 16 pcib14: subordinate bus 16 pcib14: memory decode 0xb1000000-0xb18fffff pcib14: prefetched decode 0xb0000000-0xb0ffffff pci16: <ACPI PCI bus> on pcib14 pci16: domain=0, physical bus=16 found-> vendor=0x102b, dev=0x0522, revid=0x02 domain=0, bus=16, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x1010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Prefetchable Memory, range 32, base 0xb0000000, size 24, enabled pcib14: allocated prefetch range (0xb0000000-0xb0ffffff) for rid 10 of pci0:16:0:0 map[14]: type Memory, range 32, base 0xb1800000, size 14, enabled pcib14: allocated memory range (0xb1800000-0xb1803fff) for rid 14 of pci0:16:0:0 map[18]: type Memory, range 32, base 0xb1000000, size 23, enabled pcib14: allocated memory range (0xb1000000-0xb17fffff) for rid 18 of pci0:16:0:0 pcib14: matched entry for 16.0.INTA pcib14: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci16 pcib15: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pcib15: domain 0 pcib15: secondary bus 17 pcib15: subordinate bus 17 pcib15: no prefetched decode pcib15: could not get PCI interrupt routing table for \\_SB_.PCI0.PEX5 - AE_NOT_FOUND pci17: <ACPI PCI bus> on pcib15 pci17: domain=0, physical bus=17 uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x4060-0x407f irq 16 at device 29.0 on pci0 usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3 usbus4: bpf attached uhci3: usbpf: Attached uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x4040-0x405f irq 16 at device 29.1 on pci0 usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4 usbus5: bpf attached uhci4: usbpf: Attached uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x4020-0x403f irq 16 at device 29.2 on pci0 usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5 usbus6: bpf attached uhci5: usbpf: Attached ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xb1e20000-0xb1e203ff irq 16 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 usbus7: bpf attached ehci1: usbpf: Attached pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib16: domain 0 pcib16: secondary bus 18 pcib16: subordinate bus 18 pcib16: no prefetched decode pcib16: Subtractively decoded bridge. pcib16: could not get PCI interrupt routing table for \\_SB_.PCI0.IP2P - AE_NOT_FOUND pci18: <ACPI PCI bus> on pcib16 pci18: domain=0, physical bus=18 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH10 SATA300 controller> port 0x4138-0x413f,0x414c-0x414f,0x4130-0x4137,0x4148-0x414b,0x4110-0x411f,0x4100-0x410f irq 18 at device 31.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 70 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel ICH10 SATA300 controller> port 0x4128-0x412f,0x4144-0x4147,0x4120-0x4127,0x4140-0x4143,0x40f0-0x40ff,0x40e0-0x40ef irq 21 at device 31.5 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 71 ata4: <ATA channel> at channel 0 on atapci1 ata5: <ATA channel> at channel 1 on atapci1 acpi_button0: <Sleep Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 72 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 73 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 4 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic hpet0: t1: irqs 0x00f00000 (0) hpet0: t2: irqs 0x00f00800 (0) hpet0: t3: irqs 0x00f01000 (0) Timecounter "HPET" frequency 14318180 Hz quality 950 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 74 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 75 uart1: fast interrupt ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi qpi0: <QPI system bus> on motherboard pcib17: <QPI Host-PCI bridge> pcibus 255 on qpi0 pci255: <PCI bus> on pcib17 pci255: domain=0, physical bus=255 found-> vendor=0x8086, dev=0x2c70, revid=0x02 domain=0, bus=255, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d81, revid=0x02 domain=0, bus=255, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d90, revid=0x02 domain=0, bus=255, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d91, revid=0x02 domain=0, bus=255, slot=2, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d92, revid=0x02 domain=0, bus=255, slot=2, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d93, revid=0x02 domain=0, bus=255, slot=2, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d94, revid=0x02 domain=0, bus=255, slot=2, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d95, revid=0x02 domain=0, bus=255, slot=2, func=5 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d98, revid=0x02 domain=0, bus=255, slot=3, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d99, revid=0x02 domain=0, bus=255, slot=3, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d9a, revid=0x02 domain=0, bus=255, slot=3, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d9c, revid=0x02 domain=0, bus=255, slot=3, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da0, revid=0x02 domain=0, bus=255, slot=4, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da1, revid=0x02 domain=0, bus=255, slot=4, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da2, revid=0x02 domain=0, bus=255, slot=4, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da3, revid=0x02 domain=0, bus=255, slot=4, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da8, revid=0x02 domain=0, bus=255, slot=5, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da9, revid=0x02 domain=0, bus=255, slot=5, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2daa, revid=0x02 domain=0, bus=255, slot=5, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2dab, revid=0x02 domain=0, bus=255, slot=5, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db0, revid=0x02 domain=0, bus=255, slot=6, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db1, revid=0x02 domain=0, bus=255, slot=6, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db2, revid=0x02 domain=0, bus=255, slot=6, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db3, revid=0x02 domain=0, bus=255, slot=6, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib18: <QPI Host-PCI bridge> pcibus 254 on qpi0 pci254: <PCI bus> on pcib18 pci254: domain=0, physical bus=254 found-> vendor=0x8086, dev=0x2c70, revid=0x02 domain=0, bus=254, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d81, revid=0x02 domain=0, bus=254, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d90, revid=0x02 domain=0, bus=254, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d91, revid=0x02 domain=0, bus=254, slot=2, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d92, revid=0x02 domain=0, bus=254, slot=2, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d93, revid=0x02 domain=0, bus=254, slot=2, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d94, revid=0x02 domain=0, bus=254, slot=2, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d95, revid=0x02 domain=0, bus=254, slot=2, func=5 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d98, revid=0x02 domain=0, bus=254, slot=3, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d99, revid=0x02 domain=0, bus=254, slot=3, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d9a, revid=0x02 domain=0, bus=254, slot=3, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d9c, revid=0x02 domain=0, bus=254, slot=3, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da0, revid=0x02 domain=0, bus=254, slot=4, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da1, revid=0x02 domain=0, bus=254, slot=4, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da2, revid=0x02 domain=0, bus=254, slot=4, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da3, revid=0x02 domain=0, bus=254, slot=4, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da8, revid=0x02 domain=0, bus=254, slot=5, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2da9, revid=0x02 domain=0, bus=254, slot=5, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2daa, revid=0x02 domain=0, bus=254, slot=5, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2dab, revid=0x02 domain=0, bus=254, slot=5, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db0, revid=0x02 domain=0, bus=254, slot=6, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db1, revid=0x02 domain=0, bus=254, slot=6, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db2, revid=0x02 domain=0, bus=254, slot=6, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2db3, revid=0x02 domain=0, bus=254, slot=6, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) acpi0: wakeup code va 0xffffff918c015000 pa 0x4000 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xc8000-0xc87ff) for rid 1 of orm0 pcib0: allocated type 3 (0xc8000-0xc8fff) for rid 1 of orm0 pcib0: allocated type 3 (0xc9000-0xc97ff) for rid 2 of orm0 pcib0: allocated type 3 (0xc9000-0xc9fff) for rid 2 of orm0 pcib0: allocated type 3 (0xca000-0xca7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xca800-0xcafff) for rid 3 of orm0 pcib0: allocated type 3 (0xcb000-0xcb7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xcb800-0xcbfff) for rid 3 of orm0 ex_isa_identify() isa_probe_children: disabling PnP devices ipmi1: <IPMI System Interface> on isa0 device_attach: ipmi1 attach returned 16 atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices ipmi1: <IPMI System Interface> on isa0 device_attach: ipmi1 attach returned 16 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0 pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0 atkbdc0: AT keyboard controller not found atkbdc0: <Keyboard controller (i8042)> failed to probe at port 0x60,0x64 on isa0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 76 uart0: fast interrupt isa_probe_children: probing PnP devices est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 est8: <Enhanced SpeedStep Frequency Control> on cpu8 p4tcc8: <CPU Frequency Thermal Control> on cpu8 est9: <Enhanced SpeedStep Frequency Control> on cpu9 p4tcc9: <CPU Frequency Thermal Control> on cpu9 est10: <Enhanced SpeedStep Frequency Control> on cpu10 p4tcc10: <CPU Frequency Thermal Control> on cpu10 est11: <Enhanced SpeedStep Frequency Control> on cpu11 p4tcc11: <CPU Frequency Thermal Control> on cpu11 est12: <Enhanced SpeedStep Frequency Control> on cpu12 p4tcc12: <CPU Frequency Thermal Control> on cpu12 est13: <Enhanced SpeedStep Frequency Control> on cpu13 p4tcc13: <CPU Frequency Thermal Control> on cpu13 est14: <Enhanced SpeedStep Frequency Control> on cpu14 p4tcc14: <CPU Frequency Thermal Control> on cpu14 est15: <Enhanced SpeedStep Frequency Control> on cpu15 p4tcc15: <CPU Frequency Thermal Control> on cpu15 est16: <Enhanced SpeedStep Frequency Control> on cpu16 p4tcc16: <CPU Frequency Thermal Control> on cpu16 est17: <Enhanced SpeedStep Frequency Control> on cpu17 p4tcc17: <CPU Frequency Thermal Control> on cpu17 est18: <Enhanced SpeedStep Frequency Control> on cpu18 p4tcc18: <CPU Frequency Thermal Control> on cpu18 est19: <Enhanced SpeedStep Frequency Control> on cpu19 p4tcc19: <CPU Frequency Thermal Control> on cpu19 est20: <Enhanced SpeedStep Frequency Control> on cpu20 p4tcc20: <CPU Frequency Thermal Control> on cpu20 est21: <Enhanced SpeedStep Frequency Control> on cpu21 p4tcc21: <CPU Frequency Thermal Control> on cpu21 est22: <Enhanced SpeedStep Frequency Control> on cpu22 p4tcc22: <CPU Frequency Thermal Control> on cpu22 est23: <Enhanced SpeedStep Frequency Control> on cpu23 p4tcc23: <CPU Frequency Thermal Control> on cpu23 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66508979 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered ata2: SATA reset: ports status=0x00 ata2: p0: SATA connect timeout status=00000000 ata2: p1: SATA connect timeout status=00000000 ata3: SATA reset: ports status=0x00 ata3: p0: SATA connect timeout status=00000000 ata3: p1: SATA connect timeout status=00000000 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ata4: SATA reset: ports status=0x00 ata4: p0: SATA connect timeout status=00000004 ata5: SATA reset: ports status=0x00 ata5: p0: SATA connect timeout status=00000000 (probe77:ctl2cam0:0:1:0): Error 6, Unretryable error ipmi0: Timed out waiting for GET_DEVICE_ID mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares ) mpt0:vol0(mpt0:0:0): Using Spare Pool: 0 mpt0:vol0(mpt0:0:0): 2 Members: (mpt0:1:2:0): Primary Online (mpt0:1:3:0): Secondary Online mpt0:vol0(mpt0:0:0): RAID-1 - Optimal mpt0:vol0(mpt0:0:0): Status ( Enabled ) (mpt0:vol0:1): Physical (mpt0:0:3:0), Pass-thru (mpt0:1:0:0) (mpt0:vol0:1): Online (mpt0:vol0:0): Physical (mpt0:0:2:0), Pass-thru (mpt0:1:1:0) (mpt0:vol0:0): Online (probe67:mpt0:1:4:0): Error 6, Unretryable error (probe68:mpt0:1:5:0): Error 6, Unretryable error (probe69:mpt0:1:6:0): Error 6, Unretryable error (probe70:mpt0:1:7:0): Error 6, Unretryable error (probe71:mpt0:1:8:0): Error 6, Unretryable error (probe72:mpt0:1:9:0): Error 6, Unretryable error (probe65:mpt0:1:2:0): Error 6, Unretryable error (probe66:mpt0:1:3:0): Error 6, Unretryable error (probe73:mpt0:1:10:0): Error 6, Unretryable error (probe74:mpt0:1:11:0): Error 6, Unretryable error (probe75:mpt0:1:12:0): Error 6, Unretryable error (probe76:mpt0:1:13:0): Error 6, Unretryable error (probe63:mpt0:1:0:0): CAM status 0x19 (probe63:mpt0:1:0:0): Retrying command (probe64:mpt0:1:1:0): CAM status 0x19 (probe64:mpt0:1:1:0): Retrying command (probe63:mpt0:1:0:0): CAM status 0x19 (probe63:mpt0:1:0:0): Retrying command (probe64:mpt0:1:1:0): CAM status 0x19 (probe64:mpt0:1:1:0): Retrying command (probe63:mpt0:1:0:0): CAM status 0x19 (probe63:mpt0:1:0:0): Retrying command (probe64:mpt0:1:1:0): CAM status 0x19 (probe64:mpt0:1:1:0): Retrying command (probe0:mpt0:0:0:0): Down reving Protocol Version from 4 to 2? (probe63:mpt0:1:0:0): CAM status 0x19 (probe63:mpt0:1:0:0): Retrying command (probe64:mpt0:1:1:0): CAM status 0x19 (probe64:mpt0:1:1:0): Retrying command (probe63:mpt0:1:0:0): Error 5, Retries exhausted (probe64:mpt0:1:1:0): Error 5, Retries exhausted (probe3:mpt0:1:2:0): Error 6, Unretryable error (probe4:mpt0:1:3:0): Error 6, Unretryable error (probe5:mpt0:1:4:0): Error 6, Unretryable error (probe6:mpt0:1:5:0): Error 6, Unretryable error (probe7:mpt0:1:6:0): Error 6, Unretryable error (probe9:mpt0:1:7:0): Error 6, Unretryable error (probe10:mpt0:1:8:0): Error 6, Unretryable error (probe11:mpt0:1:9:0): Error 6, Unretryable error (probe12:mpt0:1:10:0): Error 6, Unretryable error (probe13:mpt0:1:11:0): Error 6, Unretryable error (probe14:mpt0:1:12:0): Error 6, Unretryable error (probe15:mpt0:1:13:0): Error 6, Unretryable error (probe1:mpt0:1:0:0): CAM status 0x19 (probe1:mpt0:1:0:0): Retrying command (probe2:mpt0:1:1:0): CAM status 0x19 (probe2:mpt0:1:1:0): Retrying command (probe0:mpt0:0:0:0): tagged openings now 128 (probe1:mpt0:1:0:0): CAM status 0x19 (probe1:mpt0:1:0:0): Retrying command (probe2:mpt0:1:1:0): CAM status 0x19 (probe2:mpt0:1:1:0): Retrying command (probe0:mpt0:0:0:1): SCSI status error (probe0:mpt0:0:0:1): INQUIRY. CDB: 12 20 0 0 24 0 (probe0:mpt0:0:0:1): CAM status: SCSI Status Error (probe0:mpt0:0:0:1): SCSI status: Check Condition (probe0:mpt0:0:0:1): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair) (probe0:mpt0:0:0:1): Error 22, Unretryable error (probe1:mpt0:1:0:0): CAM status 0x19 (probe1:mpt0:1:0:0): Retrying command (probe2:mpt0:1:1:0): CAM status 0x19 (probe2:mpt0:1:1:0): Retrying command (probe0:mpt0:0:0:2): SCSI status error (probe0:mpt0:0:0:2): INQUIRY. CDB: 12 40 0 0 24 0 (probe0:mpt0:0:0:2): CAM status: SCSI Status Error (probe0:mpt0:0:0:2): SCSI status: Check Condition (probe0:mpt0:0:0:2): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair) (probe0:mpt0:0:0:2): Error 22, Unretryable error (probe1:mpt0:1:0:0): CAM status 0x19 (probe1:mpt0:1:0:0): Retrying command (probe2:mpt0:1:1:0): CAM status 0x19 (probe2:mpt0:1:1:0): Retrying command (probe0:mpt0:0:0:3): SCSI status error (probe0:mpt0:0:0:3): INQUIRY. CDB: 12 60 0 0 24 0 (probe0:mpt0:0:0:3): CAM status: SCSI Status Error (probe0:mpt0:0:0:3): SCSI status: Check Condition (probe0:mpt0:0:0:3): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair) (probe0:mpt0:0:0:3): Error 22, Unretryable error (probe1:mpt0:1:0:0): Error 5, Retries exhausted (probe2:mpt0:1:1:0): Error 5, Retries exhausted (probe0:mpt0:0:0:4): SCSI status error (probe0:mpt0:0:0:4): INQUIRY. CDB: 12 80 0 0 24 0 (probe0:mpt0:0:0:4): CAM status: SCSI Status Error (probe0:mpt0:0:0:4): SCSI status: Check Condition (probe0:mpt0:0:0:4): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair) (probe0:mpt0:0:0:4): Error 22, Unretryable error (probe0:mpt0:0:0:5): SCSI status error (probe0:mpt0:0:0:5): INQUIRY. CDB: 12 a0 0 0 24 0 (probe0:mpt0:0:0:5): CAM status: SCSI Status Error (probe0:mpt0:0:0:5): SCSI status: Check Condition (probe0:mpt0:0:0:5): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair) (probe0:mpt0:0:0:5): Error 22, Unretryable error AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable (probe0:mpt0:0:0:6): SCSI status error (probe0:mpt0:0:0:6): INQUIRY. CDB: 12 c0 0 0 24 0 (probe0:mpt0:0:0:6): CAM status: SCSI Status Error (probe0:mpt0:0:0:6): SCSI status: Check Condition (probe0:mpt0:0:0:6): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair) (probe0:mpt0:0:0:6): Error 22, Unretryable error (probe0:mpt0:0:0:7): SCSI status error (probe0:mpt0:0:0:7): INQUIRY. CDB: 12 e0 0 0 24 0 (probe0:mpt0:0:0:7): CAM status: SCSI Status Error (probe0:mpt0:0:0:7): SCSI status: Check Condition (probe0:mpt0:0:0:7): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair) (probe0:mpt0:0:0:7): Error 22, Unretryable error ACPI Error: Method parse/execution failed (probe8:mpt0:0:8:0): SCSI status error (probe8:mpt0:0:8:0): INQUIRY. CDB: 12 1 0 0 ff 0 (probe8:mpt0:0:8:0): CAM status: SCSI Status Error (probe8:mpt0:0:8:0): SCSI status: Check Condition (probe8:mpt0:0:8:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (probe8:mpt0:0:8:0): Error 22, Unretryable error (probe8:mpt0:0:8:0): Down reving Protocol Version from 4 to 3? [\\_SB_.PCI0.HEC2.HSCI] (Node 0xfffffe002c14e780)(probe0:mpt0:0:8:1): Unexpected Bus Free (probe0:mpt0:0:8:1): Retrying command , AE_NO_MEMORY (20120111/psparse-560) (probe0:mpt0:0:8:1): Unexpected Bus Free (probe0:mpt0:0:8:1): Retrying command (probe0:mpt0:0:8:1): Unexpected Bus Free (probe0:mpt0:0:8:1): Retrying command ACPI Error: (probe0:mpt0:0:8:1): Unexpected Bus Free (probe0:mpt0:0:8:1): Retrying command Method parse/execution failed (probe0:mpt0:0:8:1): Unexpected Bus Free (probe0:mpt0:0:8:1): Error 5, Retries exhausted [\\_GPE._L06] (Node 0xfffffe002c161440)(probe0:mpt0:0:8:2): Unexpected Bus Free (probe0:mpt0:0:8:2): Retrying command , AE_NO_MEMORY (20120111/psparse-560) (probe0:mpt0:0:8:2): Unexpected Bus Free (probe0:mpt0:0:8:2): Retrying command (probe0:mpt0:0:8:2): Unexpected Bus Free (probe0:mpt0:0:8:2): Retrying command ACPI Exception: AE_NO_MEMORY, (probe0:mpt0:0:8:2): Unexpected Bus Free (probe0:mpt0:0:8:2): Retrying command while evaluating GPE method [_L06] (20120111/evgpe-606) (probe0:mpt0:0:8:2): Unexpected Bus Free (probe0:mpt0:0:8:2): Error 5, Retries exhausted AcpiOsExecute: failed to enqueue task, consider increasing the debug.acpi.max_tasks tunable (probe0:mpt0:0:8:3): Unexpected Bus Free (probe0:mpt0:0:8:3): Retrying command (probe0:mpt0:0:8:3): Unexpected Bus Free (probe0:mpt0:0:8:3): Retrying command (probe0:mpt0:0:8:3): Unexpected Bus Free (probe0:mpt0:0:8:3): Retrying command (probe0:mpt0:0:8:3): Unexpected Bus Free (probe0:mpt0:0:8:3): Retrying command (probe0:mpt0:0:8:3): Unexpected Bus Free (probe0:mpt0:0:8:3): Error 5, Retries exhausted (probe0:mpt0:0:8:4): Unexpected Bus Free (probe0:mpt0:0:8:4): Retrying command (probe0:mpt0:0:8:4): Unexpected Bus Free (probe0:mpt0:0:8:4): Retrying command (probe0:mpt0:0:8:4): Unexpected Bus Free (probe0:mpt0:0:8:4): Retrying command (probe0:mpt0:0:8:4): Unexpected Bus Free (probe0:mpt0:0:8:4): Retrying command (probe0:mpt0:0:8:4): Unexpected Bus Free (probe0:mpt0:0:8:4): Error 5, Retries exhausted (probe0:mpt0:0:8:5): Unexpected Bus Free (probe0:mpt0:0:8:5): Retrying command (probe0:mpt0:0:8:5): Unexpected Bus Free (probe0:mpt0:0:8:5): Retrying command (probe0:mpt0:0:8:5): Unexpected Bus Free (probe0:mpt0:0:8:5): Retrying command (probe0:mpt0:0:8:5): Unexpected Bus Free (probe0:mpt0:0:8:5): Retrying command (probe0:mpt0:0:8:5): Unexpected Bus Free (probe0:mpt0:0:8:5): Error 5, Retries exhausted (probe0:mpt0:0:8:6): Unexpected Bus Free (probe0:mpt0:0:8:6): Retrying command (probe0:mpt0:0:8:6): Unexpected Bus Free (probe0:mpt0:0:8:6): Retrying command (probe0:mpt0:0:8:6): Unexpected Bus Free (probe0:mpt0:0:8:6): Retrying command (probe0:mpt0:0:8:6): Unexpected Bus Free (probe0:mpt0:0:8:6): Retrying command (probe0:mpt0:0:8:6): Unexpected Bus Free (probe0:mpt0:0:8:6): Error 5, Retries exhausted (probe0:mpt0:0:8:7): Unexpected Bus Free (probe0:mpt0:0:8:7): Retrying command (probe0:mpt0:0:8:7): Unexpected Bus Free (probe0:mpt0:0:8:7): Retrying command ugen1.2: <vendor 0x04d9> at usbus1 (probe0:mpt0:0:8:7): Unexpected Bus Free (probe0:mpt0:0:8:7): Retrying command (probe0:mpt0:0:8:7): Unexpected Bus Free (probe0:mpt0:0:8:7): Retrying command (probe0:mpt0:0:8:7): Unexpected Bus Free (probe0:mpt0:0:8:7): Error 5, Retries exhausted da0 at mpt0 bus 0 scbus0 target 0 lun 0 da0: <Intel Logical Volume 0001> Fixed Direct Access SCSI-2 device da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 476428MB (975724592 512 byte sectors: 255H 63S/T 60736C) GEOM: new disk da0 pass0 at mpt0 bus 0 scbus0 target 0 lun 0 pass0: <Intel Logical Volume 0001> Fixed Direct Access SCSI-2 device pass0: 300.000MB/s transfers pass0: Command Queueing enabled pass1 at mpt0 bus 0 scbus0 target 8 lun 0 pass1: <ESG-SHV. SCA HSBP M11.... 2.11> Fixed Enclosure Services SCSI-3 device pass1: 300.000MB/s transfers ses0 at mpt0 bus 0 scbus0 target 8 lun 0 ses0: <ESG-SHV. SCA HSBP M11.... 2.11> Fixed Enclosure Services SCSI-3 device ses0: 300.000MB/s transfers ses0: SCSI-3 SES Device lapic1: Forcing LINT1 to edge trigger lapic5: CMCI unmasked lapic2: CMCI unmasked lapic4: CMCI unmasked lapic3: CMCI unmasked lapic19: CMCI unmasked lapic16: CMCI unmasked lapic21: CMCI unmasked lapic17: CMCI unmasked lapic18: CMCI unmasked lapic20: CMCI unmasked lapic50: CMCI unmasked lapic52: CMCI unmasked lapic53: CMCI unmasked lapic51: CMCI unmasked lapic33: CMCI unmasked lapic48: CMCI unmasked lapic34: CMCI unmasked lapic49: CMCI unmasked lapic32: CMCI unmasked lapic37: CMCI unmasked lapic35: CMCI unmasked lapic36: CMCI unmasked SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000100f2 lapic50: Forcing LINT1 to edge trigger SMP: AP CPU #20 Launched! cpu20 AP: ID: 0x32000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic20: Forcing LINT1 to edge trigger SMP: AP CPU #10 Launched! cpu10 AP: ID: 0x14000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic52: Forcing LINT1 to edge trigger SMP: AP CPU #22 Launched! cpu22 AP: ID: 0x34000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic18: Forcing LINT1 to edge trigger SMP: AP CPU #8 Launched! cpu8 AP: ID: 0x12000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic32: Forcing LINT1 to edge trigger SMP: AP CPU #12 Launched! cpu12 AP: ID: 0x20000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic17: Forcing LINT1 to edge trigger SMP: AP CPU #7 Launched! cpu7 AP: ID: 0x11000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic35: Forcing LINT1 to edge trigger SMP: AP CPU #15 Launched! cpu15 AP: ID: 0x23000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic16: Forcing LINT1 to edge trigger SMP: AP CPU #6 Launched! cpu6 AP: ID: 0x10000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic51: Forcing LINT1 to edge trigger SMP: AP CPU #21 Launched! cpu21 AP: ID: 0x33000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic19: Forcing LINT1 to edge trigger SMP: AP CPU #9 Launched! cpu9 AP: ID: 0x13000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic33: Forcing LINT1 to edge trigger SMP: AP CPU #13 Launched! cpu13 AP: ID: 0x21000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic21: Forcing LINT1 to edge trigger SMP: AP CPU #11 Launched! cpu11 AP: ID: 0x15000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic3: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #4 Launched! cpu4 AP: ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic5: Forcing LINT1 to edge trigger SMP: AP CPU #5 Launched! cpu5 AP: ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic37: Forcing LINT1 to edge trigger SMP: AP CPU #17 Launched! cpu17 AP: ID: 0x25000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic34: Forcing LINT1 to edge trigger SMP: AP CPU #14 Launched! cpu14 AP: ID: 0x22000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic48: Forcing LINT1 to edge trigger SMP: AP CPU #18 Launched! cpu18 AP: ID: 0x30000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic49: Forcing LINT1 to edge trigger SMP: AP CPU #19 Launched! cpu19 AP: ID: 0x31000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic36: Forcing LINT1 to edge trigger SMP: AP CPU #16 Launched! cpu16 AP: ID: 0x24000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 lapic53: Forcing LINT1 to edge trigger SMP: AP CPU #23 Launched! cpu23 AP: ID: 0x35000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48 msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 48 msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 48 msi: Assigning MSI-X IRQ 262 to local APIC 1 vector 49 msi: Assigning MSI-X IRQ 263 to local APIC 2 vector 49 msi: Assigning MSI-X IRQ 264 to local APIC 3 vector 49 msi: Assigning MSI-X IRQ 267 to local APIC 1 vector 50 msi: Assigning MSI-X IRQ 268 to local APIC 2 vector 50 msi: Assigning MSI-X IRQ 269 to local APIC 3 vector 50 msi: Assigning MSI-X IRQ 270 to local APIC 4 vector 48 msi: Assigning MSI-X IRQ 271 to local APIC 5 vector 48 msi: Assigning MSI-X IRQ 272 to local APIC 16 vector 48 msi: Assigning MSI-X IRQ 273 to local APIC 17 vector 48 SMP: failed TSC synchronization test TSC timecounter discards lower 8 bit(s) Timecounter "TSC-low" frequency 10911623 Hz quality -100 WARNING: WITNESS option enabled, expect reduced performance. ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus1 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x3d0000 Root mount waiting for: usbus7 uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus1 ugen7.2: <vendor 0x05e3> at usbus7 umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.41, addr 2> on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:7:0:-1: Attached to scbus7 (probe0:umass-sim0:0:0:0): SCSI status error (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (probe0:umass-sim0:0:0:0): Command byte 1 is invalid (probe0:umass-sim0:0:0:0): Error 22, Unretryable error (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? ugen2.2: <American Megatrends Inc.> at usbus2 ukbd1: <Keyboard Interface> on usbus2 kbd2 at ukbd1 kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000 ums0: <Mouse Interface> on usbus2 (probe0:umass-sim0:0:0:0): SCSI status error (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) ums0: 3 buttons and [Z] coordinates ID=0 (probe0:umass-sim0:0:0:0): Error 6, Unretryable error pass2 at umass-sim0 bus 0 scbus7 target 0 lun 0 pass2: <Optiarc DVD RW AD-7713H 1.00> Removable CD-ROM SCSI-0 device pass2: 40.000MB/s transfers GEOM: new disk cd0 (cd0:umass-sim0:0:0:0): SCSI status error (cd0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error (cd0:umass-sim0:0:0:0): SCSI status: Check Condition (cd0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:umass-sim0:0:0:0): Error 6, Unretryable error cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0 cd0: <Optiarc DVD RW AD-7713H 1.00> Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed (cd0:umass-sim0:0:0:0): SCSI status error (cd0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error (cd0:umass-sim0:0:0:0): SCSI status: Check Condition (cd0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:umass-sim0:0:0:0): Error 6, Unretryable error (cd0:umass-sim0:0:0:0): SCSI status error (cd0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error (cd0:umass-sim0:0:0:0): SCSI status: Check Condition (cd0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:umass-sim0:0:0:0): Error 6, Unretryable error (cd0:umass-sim0:0:0:0): SCSI status error (cd0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error (cd0:umass-sim0:0:0:0): SCSI status: Check Condition (cd0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:umass-sim0:0:0:0): Error 6, Unretryable error ugen7.3: <vendor 0x0424> at usbus7 uhub8: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 3> on usbus7 uhub8: 4 ports with 4 removable, self powered Trying to mount root from ufs:/dev/gpt/root [rw,async]... start_init: trying /sbin/init Setting hostuuid: c3f3c2f4-1cdc-11e0-a7da-001e6708cc38. Setting hostid: 0x7365f536. No suitable dump device was found. Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: /dev/gpt/root: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/gpt/root: clean, 166793 free (441 frags, 20794 blocks, 0.2% fragmentation) /dev/gpt/var: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/gpt/var: clean, 1013197 free (37 frags, 126645 blocks, 0.0% fragmentation) /dev/gpt/usr: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/gpt/usr: clean, 112373686 free (2134 frags, 14046444 blocks, 0.0% fragmentation) Mounting local file systems:. /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). Starting Network: lo0 igb0 igb1 ix0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0xc inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 00:1e:67:08:cc:38 inet 192.168.10.60 netmask 0xffffff00 broadcast 192.168.10.255 inet6 fe80::21e:67ff:fe08:cc38%igb0 prefixlen 64 scopeid 0x1 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (1000baseT <full-duplex>) status: active igb1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 00:1e:67:08:cc:39 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 00:1b:21:62:a3:e2 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Starting devd. Starting Network: igb1. igb1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 00:1e:67:08:cc:39 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Starting Network: ix0. ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 00:1b:21:62:a3:e2 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Starting ums0 moused. add net default: gateway 192.168.10.1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 add net fe80::: gateway ::1 add net ff02::: gateway ::1 Creating and/or trimming log files. Starting syslogd. /etc/rc: WARNING: Dump device does not exist. Savecore not run. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib 32-bit compatibility ldconfig path: /usr/lib32 Clearing /tmp (X related). Updating motd:. Configuring syscons: blanktime. Starting sshd. Starting cron. Starting background file system checks in 60 seconds. Thu Feb 9 17:19:05 UTC 2012 Feb 9 17:25:02 su: admin to root on /dev/pts/0 --EVF5PPMfhYS0aIcm--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120209094832.GD93570>