Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 29 Apr 1995 21:42:25 -0500
From:      "Daniel M. Eischen" <deischen@iworks.InterWorks.org>
To:        freebsd-current@FreeBSD.org
Subject:   Swap partition not mounting
Message-ID:  <9504300242.AA06974@iworks.InterWorks.org>

next in thread | raw e-mail | index | archive | help

Hi,

  I just sup'd the src/sys tree and am having problems getting my swap partition
recognized and enabled.  Before tonight, I was running with an April 17th or
thereabouts kernel.  I've run with the Feb 25 snap, the April 10th snap, and the
April 17th current src/sys without any problems.  Do I need anything more than
src/sys to get this to work?

Below are the contents of /etc/fstab, a successful dmesg, and an unsuccessful
dmesg.  BTW, all attempts to enable swaping after boot fail.

/etc/fstab:
/dev/sd0a               /       ufs rw 1 1
/dev/sd0g               /usr    ufs rw 1 1
/dev/sd0b               none    swap sw 0 0
proc            /proc   procfs rw 0 0

--------------

Succesful boot:
Apr 29 20:52:40 Rigel /kernel: ahc0 <Adaptec 294X SCSI host adapter> rev 0 int a irq 10 on pci0:6
Apr 29 20:52:40 Rigel /kernel: ahc0: reading board settings
Apr 29 20:52:40 Rigel /kernel: ahc0: 294x Wide Channel, SCSI Id=7, aic7870, 16 SCBs
Apr 29 20:52:41 Rigel /kernel: ahc0: Downloading Sequencer Program...Done
Apr 29 20:52:41 Rigel /kernel: ahc0: Probing channel A
Apr 29 20:52:41 Rigel /kernel: ahc0 waiting for scsi devices to settle
Apr 29 20:52:41 Rigel /kernel: ahc0: target 0 using 16Bit transfers
Apr 29 20:52:41 Rigel /kernel: (ahc0:0:0): "FUJITSU M2694EQ-512 4105" type 0 fixed SCSI 2
Apr 29 20:52:41 Rigel /kernel: sd0(ahc0:0:0): Direct-Access 1033MB (2117025 512 byte sectors)
Apr 29 20:52:41 Rigel /kernel: ahc0: target 1 synchronous at 10.0MB/s, offset = 0xf
Apr 29 20:52:42 Rigel /kernel: (ahc0:1:0): "SEAGATE ST5660N 0592" type 0 fixed SCSI 2
Apr 29 20:52:42 Rigel /kernel: sd1(ahc0:1:0): Direct-Access 520MB (1065664 512 byte sectors)
Apr 29 20:52:42 Rigel /kernel: ahc0: target 2 synchronous at 4.0MB/s, offset = 0xf
Apr 29 20:52:42 Rigel /kernel: (ahc0:2:0): "PLEXTOR CD-ROM PX-4XCH 1.22" type 5 removable SCSI 2
Apr 29 20:52:42 Rigel /kernel: cd0(ahc0:2:0): CD-ROM cd present.[325427 x 2048 byte records]
Apr 29 20:52:43 Rigel /kernel: ahc0: target 3 synchronous at 10.0MB/s, offset = 0x8
Apr 29 20:52:43 Rigel /kernel: (ahc0:3:0): "HP C1533A 9406" type 1 removable SCSI 2
Apr 29 20:52:43 Rigel /kernel: st0(ahc0:3:0): Sequential-Access density code 0x24,  drive empty
Apr 29 20:52:43 Rigel /kernel: vga0 <VGA-compatible display device> rev 1 on pci0:12
Apr 29 20:52:43 Rigel /kernel: pci0: uses 8392704 bytes of memory from a0000000 upto ffbfffff.
Apr 29 20:52:43 Rigel /kernel: pci0: uses 256 bytes of I/O space from fc00 upto fcff.
Apr 29 20:52:43 Rigel /kernel: changing root device to sd0a
Apr 29 20:52:44 Rigel /kernel: sd0s1: start 63, end = 931769, size 931707: OK
Apr 29 20:52:44 Rigel /kernel: sd0s2: start 931770, end = 1044224, size 112455: OK
Apr 29 20:52:44 Rigel /kernel: sd0s4: start 1285200, end = 2117024, size 831825: OK
Apr 29 20:52:44 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:44 Rigel /kernel: sd0: start 1285200, end 2117024, size 831825
Apr 29 20:52:44 Rigel /kernel: sd0d: start 0, end 2117024, size 2117025
Apr 29 20:52:44 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:44 Rigel /kernel: sd0e: start 63, end 931769, size 931707
Apr 29 20:52:44 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:44 Rigel /kernel: sd0f: start 931770, end 1044224, size 112455
Apr 29 20:52:44 Rigel /kernel: sd1s1: start 32, end = 718847, size 718816: OK
Apr 29 20:52:44 Rigel /kernel: sd1s2: start 718848, end = 823295, size 104448: OK
Apr 29 20:52:44 Rigel /kernel: sd1s3: start 823296, end = 1064959, size 241664: OK
Apr 29 20:52:45 Rigel /kernel: sd0s1: start 63, end = 931769, size 931707: OK
Apr 29 20:52:45 Rigel /kernel: sd0s2: start 931770, end = 1044224, size 112455: OK
Apr 29 20:52:45 Rigel /kernel: sd0s4: start 1285200, end = 2117024, size 831825: OK
Apr 29 20:52:45 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:45 Rigel /kernel: sd0: start 1285200, end 2117024, size 831825
Apr 29 20:52:45 Rigel /kernel: sd0d: start 0, end 2117024, size 2117025
Apr 29 20:52:45 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:45 Rigel /kernel: sd0e: start 63, end 931769, size 931707
Apr 29 20:52:45 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:45 Rigel /kernel: sd0f: start 931770, end 1044224, size 112455
Apr 29 20:52:45 Rigel /kernel: sd0s1: start 63, end = 931769, size 931707: OK
Apr 29 20:52:45 Rigel /kernel: sd0s2: start 931770, end = 1044224, size 112455: OK
Apr 29 20:52:45 Rigel /kernel: sd0s4: start 1285200, end = 2117024, size 831825: OK
Apr 29 20:52:46 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:46 Rigel /kernel: sd0: start 1285200, end 2117024, size 831825
Apr 29 20:52:46 Rigel /kernel: sd0d: start 0, end 2117024, size 2117025
Apr 29 20:52:46 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:46 Rigel /kernel: sd0e: start 63, end 931769, size 931707
Apr 29 20:52:46 Rigel /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:52:46 Rigel /kernel: sd0f: start 931770, end 1044224, size 112455
Apr 29 20:52:34 Rigel lpd[67]: restarted

-------------

Unsuccessful boot:
Apr 29 20:48:13 Rigel kernel.test: ahc0 <Adaptec 294X SCSI host adapter> rev 0 int a irq 10 on pci0:6
Apr 29 20:48:13 Rigel kernel.test: ahc0: reading board settings
Apr 29 20:48:13 Rigel kernel.test: ahc0: 294x Wide Channel, SCSI Id=7, aic7870, 16 SCBs
Apr 29 20:48:13 Rigel kernel.test: ahc0: Using Edge Triggered Interrupts
Apr 29 20:48:13 Rigel kernel.test: ahc0: Downloading Sequencer Program...Done
Apr 29 20:48:13 Rigel kernel.test: ahc0: Probing channel A
Apr 29 20:48:14 Rigel kernel.test: ahc0 waiting for scsi devices to settle
Apr 29 20:48:14 Rigel kernel.test: ahc0: target 0 using 16Bit transfers
Apr 29 20:48:14 Rigel kernel.test: (ahc0:0:0): "FUJITSU M2694EQ-512 4105" type 0 fixed SCSI 2
Apr 29 20:48:14 Rigel kernel.test: sd0(ahc0:0:0): Direct-Access 1033MB (2117025 512 byte sectors)
Apr 29 20:48:14 Rigel kernel.test: ahc0: target 1 synchronous at 10.0MB/s, offset = 0xf
Apr 29 20:48:14 Rigel kernel.test: (ahc0:1:0): "SEAGATE ST5660N 0592" type 0 fixed SCSI 2
Apr 29 20:48:14 Rigel kernel.test: sd1(ahc0:1:0): Direct-Access 520MB (1065664 512 byte sectors)
Apr 29 20:48:14 Rigel kernel.test: ahc0: target 2 synchronous at 4.0MB/s, offset = 0xf
Apr 29 20:48:14 Rigel kernel.test: (ahc0:2:0): "PLEXTOR CD-ROM PX-4XCH 1.22" type 5 removable SCSI 2
Apr 29 20:48:14 Rigel kernel.test: cd0(ahc0:2:0): CD-ROM cd present.[325427 x 2048 byte records]
Apr 29 20:48:14 Rigel kernel.test: ahc0: target 3 synchronous at 10.0MB/s, offset = 0x8
Apr 29 20:48:14 Rigel kernel.test: (ahc0:3:0): "HP C1533A 9406" type 1 removable SCSI 2
Apr 29 20:48:14 Rigel kernel.test: st0(ahc0:3:0): Sequential-Access density code 0x24,  drive empty
Apr 29 20:48:15 Rigel kernel.test: vga0 <VGA-compatible display device> rev 1 on pci0:12
Apr 29 20:48:15 Rigel kernel.test: pci0: uses 8392704 bytes of memory from a0000000 upto ffbfffff.
Apr 29 20:48:15 Rigel kernel.test: pci0: uses 256 bytes of I/O space from fc00 upto fcff.
Apr 29 20:48:15 Rigel kernel.test: changing root device to sd0a
Apr 29 20:48:15 Rigel kernel.test: sd1s1: type 0x83, start 32, end = 718847, size 718816 : OK
Apr 29 20:48:15 Rigel kernel.test: sd1s2: type 0x82, start 718848, end = 823295, size 104448 : OK
Apr 29 20:48:15 Rigel kernel.test: sd1s3: type 0x6, start 823296, end = 1064959, size 241664 : OK
Apr 29 20:48:15 Rigel kernel.test: sd0s1: type 0x83, start 63, end = 931769, size 931707 : OK
Apr 29 20:48:15 Rigel kernel.test: sd0s2: type 0x82, start 931770, end = 1044224, size 112455 : OK
Apr 29 20:48:15 Rigel kernel.test: sd0s4: type 0xa5, start 1285200, end = 2117024, size 831825 : OK
Apr 29 20:48:15 Rigel kernel.test: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:48:15 Rigel kernel.test: sd0: start 1285200, end 2117024, size 831825
Apr 29 20:48:15 Rigel kernel.test: sd0d: start 0, end 2117024, size 2117025
Apr 29 20:48:16 Rigel kernel.test: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:48:16 Rigel kernel.test: sd0e: start 63, end 931769, size 931707
Apr 29 20:48:16 Rigel kernel.test: sd0: rejecting partition in BSD label: it isn't entirely within the slice
Apr 29 20:48:16 Rigel kernel.test: sd0f: start 931770, end 1044224, size 112455
Apr 29 20:48:16 Rigel kernel.test: WARNING: no swap space found


Thanks in advance,

Dan Eischen
deischen@iworks.InterWorks.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9504300242.AA06974>