Date: Sat, 22 Dec 2001 19:46:05 +0100 From: "Emil" <fenomeno1986@hotmail.com> To: <freebsd-questions@FreeBSD.ORG> Subject: sounds bad Message-ID: <DAV13sejEBCuDdGdlUU00006a3f@hotmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0005_01C18B21.4B62C3B0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi, I'm trying to configure my soundBlaster 128 under FreeBSD =
4.4-STABLE. I have compiled my kernel=20
lots of times, adding "device pcm", "device pcm0", "device pcm1" or =
"device pcm0 at isa? ...", but it
doesn't work. When I compile the kernel, run it, and i make the devide =
"snd0" or "snd1" in /dev/ with MAKEDEV, and
I try to load the module snd_es137x, I get these errors:
Dec 22 16:25:27 fenomenoxp /kernel: module_register: module snd_pcm =
already exists!
Dec 22 16:25:27 fenomenoxp /kernel: module_register: module snd_pcm =
already exists!
Dec 22 16:25:27 fenomenoxp /kernel: linker_file_sysinit "snd_pcm.ko" =
failed to register! 17
Dec 22 16:25:27 fenomenoxp /kernel: linker_file_sysinit "snd_pcm.ko" =
failed to register! 17
Dec 22 16:25:27 fenomenoxp /kernel: can't re-use a leaf (es_debug)!
Dec 22 16:25:27 fenomenoxp /kernel: can't re-use a leaf (es_debug)!
Dec 22 16:25:27 fenomenoxp /kernel: module_register: module =
pci/snd_es137x already exists!
Dec 22 16:25:27 fenomenoxp /kernel: module_register: module =
pci/snd_es137x already exists!
Dec 22 16:25:27 fenomenoxp /kernel: linker_file_sysinit "snd_es137x.ko" =
failed to register! 17
Dec 22 16:25:27 fenomenoxp /kernel: linker_file_sysinit "snd_es137x.ko" =
failed to register! 17
Dec 22 16:25:27 fenomenoxp /kernel: ohci0: <SiS 5571 USB controller> at =
device 1.2 on pci0
Dec 22 16:25:27 fenomenoxp /kernel: ohci0: <SiS 5571 USB controller> at =
device 1.2 on pci0
Dec 22 16:25:27 fenomenoxp /kernel: ohci0: Could not map memory
Dec 22 16:25:27 fenomenoxp /kernel: ohci0: Could not map memory
Dec 22 16:25:27 fenomenoxp /kernel: device_probe_and_attach: ohci0 =
attach returned 6
Dec 22 16:25:27 fenomenoxp /kernel: device_probe_and_attach: ohci0 =
attach returned 6
Dec 22 16:25:27 fenomenoxp /kernel: ed1: <NE2000 PCI Ethernet (RealTek =
8029)> at device 11.0 on pci0
Dec 22 16:25:27 fenomenoxp /kernel: ed1: <NE2000 PCI Ethernet (RealTek =
8029)> at device 11.0 on pci0
Dec 22 16:25:27 fenomenoxp /kernel: device_probe_and_attach: ed1 attach =
returned 2
Dec 22 16:25:27 fenomenoxp /kernel: device_probe_and_attach: ed1 attach =
returned 2
Dec 22 16:25:27 fenomenoxp /kernel: pcm0: <Creative CT5880-C> at device =
12.0 on pci0
Dec 22 16:25:27 fenomenoxp /kernel: pcm0: <Creative CT5880-C> at device =
12.0 on pci0
Dec 22 16:25:27 fenomenoxp /kernel: pcm0: unable to map register space
Dec 22 16:25:27 fenomenoxp /kernel: pcm0: unable to map register space
Dec 22 16:25:27 fenomenoxp /kernel: device_probe_and_attach: pcm0 attach =
returned 6
Dec 22 16:25:27 fenomenoxp /kernel: device_probe_and_attach: pcm0 attach =
returned 6
Anyway, the module seems to be loaded, because it appeares when I type =
kldstat:
Id Refs Address Size Name
1 4 0xc0100000 3cb0d8 kernel
2 1 0xc1069000 12000 linux.ko
3 1 0xc118e000 5000 snd_es137x.ko
4 1 0xc1194000 11000 snd_pcm.ko
I also get an error when I start KDE:
Sound server informatinal message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (Device not configured)
The sound server will continue, using the null output device.
I also send you the last lines of dmesg, if it helps:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 4.4-RELEASE #0: Sat Dec 22 12:05:02 CET 2001
root@fenomenoxp.eresmas.com:/usr/src/sys/compile/MYKERNEL3
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (450.02-MHz 586-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x58c Stepping =3D 12
Features=3D0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=3D0x80000800<SYSCALL,3DNow!>
real memory =3D 192872448 (188352K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> q
avail memory =3D 182730752 (178448K bytes)
Preloaded elf kernel "kernel" at 0xc04cd000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04cd09c.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
atapci0: <SiS 5591 ATA33 controller> port =
0x1000-0x100f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device =
0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=3D0x1039, dev=3D0x0009) at 1.1
ohci0: <SiS 5571 USB controller> at device 1.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
pcib2: <PCI to PCI bridge (vendor=3D1039 device=3D0001)> at device 2.0 =
on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS 530/620 SVGA controller> at 0.0 irq 9
ed0: <NE2000 PCI Ethernet (RealTek 8029)> at device 11.0 on pci0
device_probe_and_attach: ed0 attach returned 2
pcm0: <Creative CT5880-C> at device 12.0 on pci0
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 9787MB <QUANTUM FIREBALLlct10 10> [19885/16/63] at ata0-master =
UDMA33
acd0: CDROM <CRD-8400B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s3a
ad0s2: raw partition size !=3D slice size
ad0s2: start 10493280, end 15135119, size 4641840
ad0s2c: start 10493280, end 20033999, size 9540720
ad0s2: truncating raw partition
ad0s2: rejecting partition in BSD label: it isn't entirely within the =
slice
ad0s2: start 10493280, end 15135119, size 4641840
ad0s2a: start 10493280, end 19914079, size 9420800
ad0s2: rejecting partition in BSD label: it isn't entirely within the =
slice
ad0s2b: start 19914080, end 20033999, size 119920
module_register: module snd_pcm already exists!
linker_file_sysinit "snd_pcm.ko" failed to register! 17
can't re-use a leaf (es_debug)!
module_register: module pci/snd_es137x already exists!
linker_file_sysinit "snd_es137x.ko" failed to register! 17
ohci0: <SiS 5571 USB controller> at device 1.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
ed1: <NE2000 PCI Ethernet (RealTek 8029)> at device 11.0 on pci0
device_probe_and_attach: ed1 attach returned 2
pcm0: <Creative CT5880-C> at device 12.0 on pci0
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6
Please help me!
------=_NextPart_000_0005_01C18B21.4B62C3B0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.3315.2870" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi, I'm trying to configure my =
soundBlaster 128=20
under FreeBSD 4.4-STABLE. I have compiled my kernel <BR>lots of times, =
adding=20
"device pcm", "device pcm0", "device pcm1" or "device pcm0 at isa? ...", =
but=20
it<BR>doesn't work. When I compile the kernel, run it, and i make the =
devide=20
"snd0" or "snd1" in /dev/ with MAKEDEV, and<BR>I try to load the module=20
snd_es137x, I get these errors:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2><BR>Dec 22 16:25:27 fenomenoxp /kernel: =
module_register: module snd_pcm already exists!<BR>Dec 22 16:25:27 =
fenomenoxp=20
/kernel: module_register: module snd_pcm already exists!<BR>Dec 22 =
16:25:27=20
fenomenoxp /kernel: linker_file_sysinit "snd_pcm.ko" failed to register! =
17<BR>Dec 22 16:25:27 fenomenoxp /kernel: linker_file_sysinit =
"snd_pcm.ko"=20
failed to register! 17<BR>Dec 22 16:25:27 fenomenoxp /kernel: can't =
re-use a=20
leaf (es_debug)!<BR>Dec 22 16:25:27 fenomenoxp /kernel: can't re-use a =
leaf=20
(es_debug)!<BR>Dec 22 16:25:27 fenomenoxp /kernel: module_register: =
module=20
pci/snd_es137x already exists!<BR>Dec 22 16:25:27 fenomenoxp /kernel:=20
module_register: module pci/snd_es137x already exists!<BR>Dec 22 =
16:25:27=20
fenomenoxp /kernel: linker_file_sysinit "snd_es137x.ko" failed to =
register!=20
17<BR>Dec 22 16:25:27 fenomenoxp /kernel: linker_file_sysinit =
"snd_es137x.ko"=20
failed to register! 17<BR>Dec 22 16:25:27 fenomenoxp /kernel: ohci0: =
<SiS=20
5571 USB controller> at device 1.2 on pci0<BR>Dec 22 16:25:27 =
fenomenoxp=20
/kernel: ohci0: <SiS 5571 USB controller> at device 1.2 on =
pci0<BR>Dec 22=20
16:25:27 fenomenoxp /kernel: ohci0: Could not map memory<BR>Dec 22 =
16:25:27=20
fenomenoxp /kernel: ohci0: Could not map memory<BR>Dec 22 16:25:27 =
fenomenoxp=20
/kernel: device_probe_and_attach: ohci0 attach returned 6<BR>Dec 22 =
16:25:27=20
fenomenoxp /kernel: device_probe_and_attach: ohci0 attach returned =
6<BR>Dec 22=20
16:25:27 fenomenoxp /kernel: ed1: <NE2000 PCI Ethernet (RealTek =
8029)> at=20
device 11.0 on pci0<BR>Dec 22 16:25:27 fenomenoxp /kernel: ed1: =
<NE2000 PCI=20
Ethernet (RealTek 8029)> at device 11.0 on pci0<BR>Dec 22 16:25:27 =
fenomenoxp=20
/kernel: device_probe_and_attach: ed1 attach returned 2<BR>Dec 22 =
16:25:27=20
fenomenoxp /kernel: device_probe_and_attach: ed1 attach returned =
2<BR>Dec 22=20
16:25:27 fenomenoxp /kernel: pcm0: <Creative CT5880-C> at device =
12.0 on=20
pci0<BR>Dec 22 16:25:27 fenomenoxp /kernel: pcm0: <Creative =
CT5880-C> at=20
device 12.0 on pci0<BR>Dec 22 16:25:27 fenomenoxp /kernel: pcm0: unable =
to map=20
register space<BR>Dec 22 16:25:27 fenomenoxp /kernel: pcm0: unable to =
map=20
register space<BR>Dec 22 16:25:27 fenomenoxp /kernel: =
device_probe_and_attach:=20
pcm0 attach returned 6<BR>Dec 22 16:25:27 fenomenoxp /kernel:=20
device_probe_and_attach: pcm0 attach returned 6</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Anyway, the module seems to be loaded, =
because it=20
appeares when I type kldstat:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Id Refs Address =20
Size Name<BR> 1 4 =
0xc0100000=20
3cb0d8 kernel<BR> 2 1 0xc1069000=20
12000 linux.ko<BR> 3 1 =
0xc118e000=20
5000 snd_es137x.ko<BR> 4 =
1=20
0xc1194000 11000 snd_pcm.ko</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>I also get an error when I start =
KDE:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2> Sound server informatinal=20
message:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2> Error while initializing =
the sound=20
driver:<BR> device /dev/dsp can't be opened (Device not=20
configured)</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2> The sound server will =
continue, using=20
the null output device.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>I also send you the last lines of =
dmesg, if it=20
helps:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Copyright (c) 1992-2001 The FreeBSD=20
Project.<BR>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, =
1992, 1993,=20
1994<BR> The Regents of the =
University=20
of California. All rights reserved.<BR>FreeBSD 4.4-RELEASE #0: Sat Dec =
22=20
12:05:02 CET 2001<BR> <A=20
href=3D"mailto:root@fenomenoxp.eresmas.com:/usr/src/sys/compile/MYKERNEL3=
">root@fenomenoxp.eresmas.com:/usr/src/sys/compile/MYKERNEL3</A><BR>Timec=
ounter=20
"i8254" frequency 1193182 Hz<BR>CPU: AMD-K6(tm) 3D processor =
(450.02-MHz=20
586-class CPU)<BR> Origin =3D "AuthenticAMD" Id =3D =
0x58c Stepping=20
=3D 12<BR> =20
Features=3D0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX><BR>&nbs=
p; AMD=20
Features=3D0x80000800<SYSCALL,3DNow!><BR>real memory =3D =
192872448=20
(188352K bytes)<BR>config> di sn0<BR>config> di lnc0<BR>config> =
di=20
ie0<BR>config> di fe0<BR>config> di cs0<BR>config> q<BR>avail =
memory =3D=20
182730752 (178448K bytes)<BR>Preloaded elf kernel "kernel" at=20
0xc04cd000.<BR>Preloaded userconfig_script "/boot/kernel.conf" at=20
0xc04cd09c.<BR>K6-family MTRR support enabled (2 registers)<BR>md0: =
Malloc=20
disk<BR>Using $PIR table, 7 entries at 0xc00fdf50<BR>npx0: <math=20
processor> on motherboard<BR>npx0: INT 16 interface<BR>pcib0: =
<Host to PCI=20
bridge> on motherboard<BR>pci0: <PCI bus> on pcib0<BR>atapci0: =
<SiS=20
5591 ATA33 controller> port=20
0x1000-0x100f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device =
0.1 on=20
pci0<BR>ata0: at 0x1f0 irq 14 on atapci0<BR>ata1: at 0x170 irq 15 on=20
atapci0<BR>isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on=20
pci0<BR>isa0: <ISA bus> on isab0<BR>pci0: <unknown card>=20
(vendor=3D0x1039, dev=3D0x0009) at 1.1<BR>ohci0: <SiS 5571 USB =
controller> at=20
device 1.2 on pci0<BR>ohci0: Could not map =
memory<BR>device_probe_and_attach:=20
ohci0 attach returned 6<BR>pcib2: <PCI to PCI bridge (vendor=3D1039=20
device=3D0001)> at device 2.0 on pci0<BR>pci1: <PCI bus> on=20
pcib2<BR>pci1: <SiS 530/620 SVGA controller> at 0.0 irq 9<BR>ed0:=20
<NE2000 PCI Ethernet (RealTek 8029)> at device 11.0 on=20
pci0<BR>device_probe_and_attach: ed0 attach returned 2<BR>pcm0: =
<Creative=20
CT5880-C> at device 12.0 on pci0<BR>pcm0: unable to map register=20
space<BR>device_probe_and_attach: pcm0 attach returned 6<BR>pcib1: =
<SiS 5591=20
host to AGP bridge> on motherboard<BR>pci2: <PCI bus> on =
pcib1<BR>orm0:=20
<Option ROM> at iomem 0xc0000-0xc7fff on isa0<BR>fdc0: <NEC =
72065B or=20
clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0<BR>fdc0: FIFO =
enabled, 8=20
bytes threshold<BR>fd0: <1440-KB 3.5" drive> on fdc0 drive =
0<BR>atkbdc0:=20
<Keyboard controller (i8042)> at port 0x60,0x64 on isa0<BR>atkbd0: =
<AT=20
Keyboard> flags 0x1 irq 1 on atkbdc0<BR>kbd0 at atkbd0<BR>psm0: =
<PS/2=20
Mouse> irq 12 on atkbdc0<BR>psm0: model IntelliMouse, device ID =
3<BR>vga0:=20
<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on=20
isa0<BR>sc0: <System console> at flags 0x100 on isa0<BR>sc0: VGA =
<16=20
virtual consoles, flags=3D0x300><BR>sio0 at port 0x3f8-0x3ff irq 4 =
flags 0x10=20
on isa0<BR>sio0: type 16550A<BR>sio1: configured irq 3 not in bitmap of =
probed=20
irqs 0<BR>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on =
isa0<BR>ppc0:=20
Generic chipset (EPP/NIBBLE) in COMPATIBLE mode<BR>plip0: <PLIP =
network=20
interface> on ppbus0<BR>lpt0: <Printer> on ppbus0<BR>lpt0:=20
Interrupt-driven port<BR>ppi0: <Parallel I/O> on ppbus0<BR>ad0: =
9787MB=20
<QUANTUM FIREBALLlct10 10> [19885/16/63] at ata0-master =
UDMA33<BR>acd0:=20
CDROM <CRD-8400B> at ata1-master using PIO4<BR>Mounting root from=20
ufs:/dev/ad0s3a<BR>ad0s2: raw partition size !=3D slice size<BR>ad0s2: =
start=20
10493280, end 15135119, size 4641840<BR>ad0s2c: start 10493280, end =
20033999,=20
size 9540720<BR>ad0s2: truncating raw partition<BR>ad0s2: rejecting =
partition in=20
BSD label: it isn't entirely within the slice<BR>ad0s2: start 10493280, =
end=20
15135119, size 4641840<BR>ad0s2a: start 10493280, end 19914079, size=20
9420800<BR>ad0s2: rejecting partition in BSD label: it isn't entirely =
within the=20
slice<BR>ad0s2b: start 19914080, end 20033999, size =
119920<BR>module_register:=20
module snd_pcm already exists!<BR>linker_file_sysinit "snd_pcm.ko" =
failed to=20
register! 17<BR>can't re-use a leaf (es_debug)!<BR>module_register: =
module=20
pci/snd_es137x already exists!<BR>linker_file_sysinit "snd_es137x.ko" =
failed to=20
register! 17<BR>ohci0: <SiS 5571 USB controller> at device 1.2 on=20
pci0<BR>ohci0: Could not map memory<BR>device_probe_and_attach: ohci0 =
attach=20
returned 6<BR>ed1: <NE2000 PCI Ethernet (RealTek 8029)> at device =
11.0 on=20
pci0<BR>device_probe_and_attach: ed1 attach returned 2<BR>pcm0: =
<Creative=20
CT5880-C> at device 12.0 on pci0<BR>pcm0: unable to map register=20
space<BR>device_probe_and_attach: pcm0 attach returned 6</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Please help me!</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_0005_01C18B21.4B62C3B0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DAV13sejEBCuDdGdlUU00006a3f>