From owner-freebsd-bugs Sat Jun 21 07:49:52 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA01580 for bugs-outgoing; Sat, 21 Jun 1997 07:49:52 -0700 (PDT) Received: from come.net.uk (cnt2.come.net.uk [194.207.66.11]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA01567 for ; Sat, 21 Jun 1997 07:49:39 -0700 (PDT) Received: from intra2.come.net.uk (intra2.come.net.uk [194.207.66.16]) by come.net.uk (8.8.6/8.8.6) with SMTP id PAA12768 for ; Sat, 21 Jun 1997 15:48:13 +0100 (BST) Message-Id: <199706211448.PAA12768@come.net.uk> Comments: Authenticated sender is From: "Thomas Yao" Organization: ComeNet Technology Ltd. To: bugs@freebsd.org Date: Sat, 21 Jun 1997 15:48:28 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: bugs report Reply-to: Thomas@come.net.uk Priority: normal X-mailer: Pegasus Mail for Win32 (v2.52) Sender: owner-bugs@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hello, I think I found a bug in the FreeBSD 2.2.2-RELEASE which caused my system has 4 VGA drivers. I guess you may be interested in this case. Regards, Thomas ############# copied from dmesg ########################## Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.2-RELEASE #0: Wed May 28 00:18:41 BST 1997 thomas@cnt3.come.net.uk:/usr/src/sys/compile/NEWKERNEL Calibrating clock(s) ... i586 clock: 199908843 Hz, i8254 clock: 1193213 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_I586_CALIBRATION not specified - using old calibration method CPU: Pentium (199.90-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 134217728 (131072K bytes) avail memory = 129835008 (126792K bytes) pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000005c pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=70308086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 2 on pci0:0 PCI Concurrency: enabled Cache: 256K pipelined-burst secondary; L1 enabled DRAM: no memory hole, 66 MHz refresh Read burst timing: x-2-2-2/x-3-3-3 Write burst timing: x-2-2-2 RAS-CAS delay: 3 clocks chip1 rev 1 on pci0:7:0 chip2 rev 0 on pci0:7:1 mapreg[20] type=1 addr=0000f000 size=0010. I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks Extended BIOS: disabled Lower BIOS: disabled Coprocessor IRQ13: disabled Mouse IRQ12: disabled Interrupt Routing: A: , B: , C: , D: MB0: , MB1: ahc0 rev 0 int a irq 15 on pci0:17 mapreg[10] type=1 addr=00006100 size=0100. mapreg[14] type=0 addr=e1001000 size=1000. reg16: ioaddr=0x6100 size=0x100 ahc0: Reading SEEPROM...done. internal50 cable is present internal68 cable not present brdctl == 0xac external cable not present eprom not present brdctl == 0x6c low byte termination enabled, high byte termination disabled ahc0: aic7870 Single Channel, SCSI Id=7, 16/255 SCBs ahc0: Resetting Channel A ahc0: Downloading Sequencer Program...ahc0: 411 instructions downloaded Done ahc0: Probing channel A ahc0: target 0 synchronous at 10.0MHz, offset = 0xf ahc0: target 0 Tagged Queuing Device (ahc0:0:0): "SEAGATE ST32151N 0530" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2049MB (4197405 512 byte sectors) sd0(ahc0:0:0): with 4177 cyls, 8 heads, and an average 125 sectors/track ahc0: target 1 synchronous at 10.0MHz, offset = 0xf ahc0: target 1 Tagged Queuing Device (ahc0:1:0): "SEAGATE ST32155N 0532" type 0 fixed SCSI 2 sd1(ahc0:1:0): Direct-Access 2049MB (4197405 512 byte sectors) sd1(ahc0:1:0): with 4177 cyls, 8 heads, and an average 125 sectors/track ahc0: target 6 synchronous at 5.0MHz, offset = 0xf (ahc0:6:0): "MATSHITA CD-ROM CR-506 8S03" type 5 removable SCSI 2 cd0(ahc0:6:0): CD-ROM can't get the size de0 rev 17 int a irq 11 on pci0:18 mapreg[10] type=1 addr=00006200 size=0080. mapreg[14] type=0 addr=e1000000 size=0080. reg16: ioaddr=0x6200 size=0x80 de0: 21041 [10Mb/s] pass 1.1 de0: address 00:00:c0:13:9c:d4 vga0 rev 0 on pci0:20:0 mapreg[10] type=0 addr=e0000000 size=1000000. mapreg[14] type=1 addr=00006300 size=0010. vga1 rev 0 on pci0:20:2 mapreg[10] type=0 addr=e0000000 size=1000000. mapreg[14] type=1 addr=00006300 size=0010. vga2 rev 0 on pci0:20:4 mapreg[10] type=0 addr=e0000000 size=1000000. mapreg[14] type=1 addr=00006300 size=0010. vga3 rev 0 on pci0:20:6 mapreg[10] type=0 addr=e0000000 size=1000000. mapreg[14] type=1 addr=00006300 size=0010. pci0: uses 67113088 bytes of memory from e0000000 upto e1001fff. pci0: uses 464 bytes of I/O space from 6100 upto f00f. Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0065 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 02 55 81 bf 1f 00 4f 0e 0f 00 00 ff ff 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface imasks: bio c0008040, tty c003089a, net c003089a BIOS Geometries: 0:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors 1:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Considering FFS root f/s. configure() finished. de0: enabling 10baseT port sd0s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK sd1s1: type 0xa5, start 0, end = 4197404, size 4197405 sd1s1: C/H/S end 261/70/30 (558059) != end 4197404: invalid sd1s1: type 0xa5, start 0, end = 4197404, size 4197405 sd1s1: C/H/S end 261/70/30 (558059) != end 4197404: invalid ################# end of file ####################### ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ComeNet Technology Ltd. Director://Thomas C.L. Yao Tel: 0181 357-9222 Fax: 0181 961-0345 Email: sales@come.net.uk Http://www.come.net.uk Unit 25 & 26 Park Royal House, 23 Park Royal Road, London NW10 7JH ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~