From owner-freebsd-questions Thu Feb 2 16:13:35 1995 Return-Path: questions-owner Received: (from root@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id QAA23070 for questions-outgoing; Thu, 2 Feb 1995 16:13:35 -0800 Received: from ifc.com (ifc.com [204.30.44.1]) by freefall.cdrom.com (8.6.9/8.6.6) with ESMTP id QAA23062 for ; Thu, 2 Feb 1995 16:13:33 -0800 Received: from ([204.30.44.12]) by ifc.com (8.6.8/8.6.6) with SMTP id QAA00323 for ; Thu, 2 Feb 1995 16:14:49 -0900 Date: Thu, 2 Feb 1995 16:14:49 -0900 Message-Id: <199502030114.QAA00323@ifc.com> X-Sender: wallison@ifc.com Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: freebsd-questions@FreeBSD.org From: wallison@ifc.com (Bill Allison) Subject: tty/modem config problems -- help again! X-Mailer: Sender: questions-owner@FreeBSD.org Precedence: bulk I recently bought a USR Sportster 28.8 V.34 modem and installed it on my FreeBSD 1.1.5.1 system. I got kermit, installed the binary, and have been having varying degrees of success & failure getting modems to work. (Under one configuration I got getty errors (device /dev/ttyd2 not configured) all the time) Using the connect command in kermit, I was able to give AT commands to the modem successfully, and was able to make it answer the phone. Then, when the modem connected, the whole system crashed with a page fault error. I can't even communicate w/ the modem any more because as soon as I type "connect" the screen goes blank and gibberish (including login messages) go flying by... I am sure there is some obvious/basic thing I am doing wrong... I read every FAQ I could get my hands on. I am sorry to trouble you all, but I would appreciate help. I have attached excerpts from relevant files & messages: ---from /dev/: crw-rw-rw- 1 root wheel 1, 0 Feb 2 15:23 tty crw------- 1 root wheel 28, 0 Feb 2 14:29 tty00 crw-rw-rw- 1 root wheel 28, 1 Feb 2 12:01 tty01 crw------- 1 root wheel 28, 0 Feb 2 12:02 ttyd2 crw------- 1 root wheel 28, 2 Feb 2 11:21 ttyd2old crw------- 1 root wheel 28, 3 Feb 2 12:01 ttyd3 ---excerpt from dmesg--(sio info)--------------------------------------------- sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 not found at 0x3e8 sio3 not found at 0x2e8 ---from /etc/ttys------------------------------------------------------- # Virtual terminals ttyv1 "/usr/libexec/getty Pc" cons25 on secure ttyv2 "/usr/libexec/getty Pc" cons25 on secure ttyv3 "/usr/libexec/getty Pc" cons25 off secure # Hardwired terminals tty00 "/usr/libexec/getty std.57600" unknown on secure tty01 "/usr/libexec/getty std.57600" unknown off secure # Dialin terminals ttyd2 "/usr/libexec/getty std.57600" unknown off secure ttyd3 "/usr/libexec/getty std.9600" unknown on secure ---from /etc/gettytab------------------------------------------------------- # # Dial in rotary tables, speed selection via 'break' # 0|d300|Dial-300:\ :nx=d1200:cd#2:sp#300: d1200|Dial-1200:\ :nx=d150:fd#1:sp#1200: d150|Dial-150:\ :nx=d110:lm@:tc=150-baud: d110|Dial-110:\ :nx=d300:tc=300-baud: d115200:\ :np:to#30:hc:tc=115200-baud --------from /etc/rc------------------------------------------------------- #comm port setup #echo -n 'setting comm ports' echo -n 'port 1' ; stty -f /dev/tty00 -clocal crtscts ; comcontrol /dev/tty00 bidir #echo -n 'port 1' ; stty -f /dev/ttyd2 -clocal crtscts ; comcontrol /dev/ttyd2 bidir --------------------- William Allison Ian Freed Consulting, Inc. Seattle, WA 98104 Tel: 206.583.8919 FAX: 206.583.8941 http://www.ifc.com/