From owner-freebsd-usb@FreeBSD.ORG Sun Jun 22 22:29:39 2008 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 18CBF1065676 for ; Sun, 22 Jun 2008 22:29:39 +0000 (UTC) (envelope-from Thomas.Sparrevohn@btinternet.com) Received: from smtp800.mail.ukl.yahoo.com (smtp800.mail.ukl.yahoo.com [217.12.12.142]) by mx1.freebsd.org (Postfix) with SMTP id 007D38FC13 for ; Sun, 22 Jun 2008 22:29:37 +0000 (UTC) (envelope-from Thomas.Sparrevohn@btinternet.com) Received: (qmail 57753 invoked from network); 22 Jun 2008 22:02:55 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=btinternet.com; h=Received:X-YMail-OSG:X-Yahoo-Newman-Property:From:To:Subject:Date:Message-ID:MIME-Version:Content-Type:X-Mailer:Thread-Index:Content-Language; b=mNhBuaktaVqUEItIv/k7l9UctzLInrk5wATFpc7N2zXJ7UuLkMPtpk/4xx05O3e34EhZG1Zmq2f8xR+WOBPX2WeZRwqWZ0anpqEnEfqCBRWT89tDP8lGOo6K6grj7jLHEsZGZzvEMIcBTIGMW51JciEG0X77OG/PhVM5QJIOtqU= ; Received: from unknown (HELO W2FZZ0VC03) (thomas.sparrevohn@btinternet.com@86.133.246.4 with login) by smtp800.mail.ukl.yahoo.com with SMTP; 22 Jun 2008 22:02:52 -0000 X-YMail-OSG: kt6oTH8VM1mnVazu_YBqeQOyFgL3yRi7LRLCzF0lDZ2t3dZZs3I_ycyy2IytdAdcZTUgidFU6NH4BBlDrBUJ06fpYZDwfISXQMONvS2FEzRG2_9ge9K9sRXv5df26BGAA2.ETG_wmFaICBC7pMKi3Qcp X-Yahoo-Newman-Property: ymail-3 From: "Thomas Sparrevohn" To: Date: Sun, 22 Jun 2008 23:02:51 +0100 Message-ID: <000301c8d4b3$b79503d0$26bf0b70$@Sparrevohn@btinternet.com> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0004_01C8D4BC.19596BD0" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AcjUs7brDN8M9hL7SnGV18ejiZS94g== Content-Language: en-gb X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: rum driver triggers panic after wlan update X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 22 Jun 2008 22:29:39 -0000 This is a multipart message in MIME format. ------=_NextPart_000_0004_01C8D4BC.19596BD0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi Before I send a pr in - I just wanted to check whether the issue is known A seemly random period time after I plugin the rum0 device the kernel crashes rum0: on uhub1 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528 rum0: WARNING: using obsoleted IFF_NEEDSGIANT flag rum0: bpf attached rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wlan0: bpf attached wlan0: Ethernet address: 00:17:3f:72:40:90 wlan0: bpf attached rum0: need multicast update callback rum0: need multicast update callback Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x40 fault code = supervisor read data, page not present instruction pointer = 0x8:0xffffffff803e082e stack pointer = 0x10:0xffffffffd75bfb50 frame pointer = 0x10:0xffffffffd75bfb80 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (irq22: ehci0) It I boot the machine USB rum0 device attached - The crash comes normally pretty instantaneously (dmesg_8.txt) wlan0: Ethernet address: 00:17:3f:72:40:90 rum0: need multicast update callback rum0: could not transmit buffer: SHORT_XFER Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x8 fault code = supervisor read data, page not present instruction pointer = 0x8:0xffffffff803e0712 stack pointer = 0x10:0xffffffffd75bfb50 frame pointer = 0x10:0xffffffffd75bfb80 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (irq22: ehci0) Physical memory: 4076 MB Dumping 317 MB: 302 286 270 254 238 222 206 190 174 158 142 126 110 94 78 62 46 30 14 If I use a kernel without debugging - the kernel simply freezes totally - no panic - no nothing - does anybody have any idea? ------=_NextPart_000_0004_01C8D4BC.19596BD0 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2008 The FreeBSD Project.=0ACopyright (c) 1979, 1980, 19= 83, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A The Regents of the Universi= ty of California. All rights reserved.=0AFreeBSD is a registered trademark = of The FreeBSD Foundation.=0AFreeBSD 8.0-CURRENT #2: Sat Jun 21 11:20:35 BS= T 2008=0A root@w2fzz0vc03.aah-go-on.com:/usr/obj/usr/home/sandbox/debug2= /src/sys/GENERIC_DTRACE=0AWARNING: WITNESS option enabled, expect reduced p= erformance.=0APreloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810fa= 000.=0APreloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff810fa1f8.= =0APreloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff810f= a8a0.=0APreloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xfffffff= f810faed0.=0APreloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xf= fffffff810fb580.=0ATimecounter "i8254" frequency 1193182 Hz quality 0=0ACal= ibrating TSC clock ... TSC clock: 3192053112 Hz=0ACPU: Intel(R) Core(TM)2 Q= uad CPU @ 2.66GHz (3192.05-MHz K8-class CPU)=0A Origin =3D "Genu= ineIntel" Id =3D 0x6f7 Stepping =3D 7=0A Features=3D0xbfebfbff=0A Features2=3D0xe3bd=0A AMD Features=3D0x20100800=0A AMD Features2=3D0x1=0A Cores per package: 4=0Ausabl= e memory =3D 4274376704 (4076 MB)=0APhysical memory chunk(s):=0A0x000000000= 0001000 - 0x000000000009bfff, 634880 bytes (155 pages)=0A0x00000000011fa000= - 0x0000000096333fff, 2501091328 bytes (610618 pages)=0A0x0000000100000000= - 0x000000015ffeffff, 1610547200 bytes (393200 pages)=0Aavail memory =3D = 4099776512 (3909 MB)=0AACPI APIC Table: =0AINTR: Adding loc= al APIC 1 as a target=0AINTR: Adding local APIC 2 as a target=0AINTR: Addin= g local APIC 3 as a target=0AFreeBSD/SMP: Multiprocessor System Detected: 4= CPUs=0A cpu0 (BSP): APIC ID: 0=0A cpu1 (AP): APIC ID: 1=0A cpu2 (AP): AP= IC ID: 2=0A cpu3 (AP): APIC ID: 3=0AAPIC: CPU 0 has ACPI ID 1=0AAPIC: CPU= 1 has ACPI ID 2=0AAPIC: CPU 2 has ACPI ID 3=0AAPIC: CPU 3 has ACPI ID 4=0A= ULE: setup cpu 0=0AULE: setup cpu 1=0AULE: setup cpu 2=0AULE: setup cpu 3= =0AThis module (opensolaris) contains code covered by the=0ACommon Developm= ent and Distribution License (CDDL)=0Asee http://opensolaris.org/os/licensi= ng/opensolaris_license/=0AACPI: RSDP @ 0x0xfebf0/0x0024 (v 2 DELL )=0AACP= I: XSDT @ 0x0xfd0b9/0x0064 (v 1 DELL B8K 0x00000014 ASL 0x00000061= )=0AACPI: FACP @ 0x0xfd191/0x00F4 (v 3 DELL B8K 0x00000014 ASL 0x0= 0000061)=0AACPI: DSDT @ 0x0xfffc13b6/0x3F25 (v 1 DELL dt_ex 0x0000100= 0 INTL 0x20050624)=0AACPI: FACS @ 0x0x9fdbcc00/0x0040=0AACPI: SSDT @ 0x0xff= fc52db/0x0099 (v 1 DELL st_ex 0x00001000 INTL 0x20050624)=0AACPI: API= C @ 0x0xfd285/0x0092 (v 1 DELL B8K 0x00000014 ASL 0x00000061)=0AAC= PI: BOOT @ 0x0xfd317/0x0028 (v 1 DELL B8K 0x00000014 ASL 0x0000006= 1)=0AACPI: MCFG @ 0x0xfd33f/0x003E (v 1 DELL B8K 0x00000014 ASL 0x= 00000061)=0AACPI: HPET @ 0x0xfd37d/0x0038 (v 1 DELL B8K 0x00000014 = ASL 0x00000061)=0AACPI: DUMY @ 0x0x9fdbec00/0x0024 (v 1 DELL B8K 0= x00000014 ASL 0x00000061)=0AACPI: SLIC @ 0x0xfd3b5/0x0176 (v 1 DELL B8= K 0x00000014 ASL 0x00000061)=0AMADT: Found IO APIC ID 8, Interrupt 0 a= t 0xfec00000=0Aioapic0: Changing APIC ID to 8=0Aioapic0: Routing external 8= 259A's -> intpin 0=0AMADT: Interrupt override: source 0, irq 2=0Aioapic0: R= outing IRQ 0 -> intpin 2=0AMADT: Interrupt override: source 9, irq 9=0Aioap= ic0: intpin 9 trigger: level=0Alapic: Routing NMI -> LINT1=0Alapic: LINT1 t= rigger: level=0Alapic: LINT1 polarity: high=0Aioapic0 irqs 0-= 23 on motherboard=0Alapic0: Forcing LINT1 to edge trigger=0Acpu0 BSP:=0A = ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint= 0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: = 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000=0Awlan: <802.1= 1 Link Layer>=0Aath_rate: version 1.2 =0Akbd: new array size 4=0Akbd1 at kbdmux0=0Amem: =0Anfslock: p= seudo-device=0Anull: =0Arandom: =0Aio: =0Aath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, = RF5111, RF5112, RF2413, RF5413)=0Ahptrr: RocketRAID 17xx/2xxx SATA controll= er driver v1.2 (Jun 21 2008 11:20:03)=0Aacpi0: on motherboar= d=0Aioapic0: routing intpin 9 (ISA IRQ 9) to vector 48=0Aacpi0: [MPSAFE]=0A= acpi0: [ITHREAD]=0Aacpi0: Power Button (fixed)=0Aacpi_bus_number: root bus = has no _BBN, assuming 0=0AAcpiOsDerivePciId: \\_SB_.PCI0.ISA_.P40C -> bus 0= dev 10 func 0=0Aacpi0: reservation of 0, a0000 (3) failed=0Aacpi0: reserva= tion of 100000, f00000 (3) failed=0Aacpi0: reservation of 1000000, 9edbcc00= (3) failed=0AACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10=0AT= imecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0Aacpi_timer0: <24= -bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0=0Apci_link0: = Index IRQ Rtd Ref IRQs=0A Initial Probe 0 11 N 0 3 4 5 = 6 7 9 10 11 12 15=0A Validation 0 11 N 0 3 4 5 6 7 9 10 = 11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15= =0Apci_link1: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 = 10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 10 N = 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3 4= 5 6 7 9 10 11 12 15=0Apci_link2: Index IRQ Rtd Ref IRQs=0A Ini= tial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation = 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0= 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link3: Index IRQ Rt= d Ref IRQs=0A Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12= 15=0A Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0A A= fter Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link4: = Index IRQ Rtd Ref IRQs=0A Initial Probe 0 11 N 0 = 3 4 5 6 7 9 10 11 12 15=0A Validation 0 11 N 0 3 4 5 6 7= 9 10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 = 12 15=0Apci_link5: Index IRQ Rtd Ref IRQs=0A Initial Probe = 0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 10 = N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0= 3 4 5 6 7 9 10 11 12 15=0Apci_link6: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A Validat= ion 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable = 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link7: Index IR= Q Rtd Ref IRQs=0A Initial Probe 0 255 N 0 3 4 5 6 7 9 10 = 11 12 15=0A Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15= =0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_li= nk8: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 9 N = 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 9 N 0 3 4= 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 = 10 11 12 15=0Apci_link9: Index IRQ Rtd Ref IRQs=0A Initial Prob= e 0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0= 10 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N= 0 3 4 5 6 7 9 10 11 12 15=0Apci_link10: Index IRQ Rtd Ref I= RQs=0A Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0A V= alidation 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disa= ble 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link11: Ind= ex IRQ Rtd Ref IRQs=0A Initial Probe 0 11 N 0 3 4 5 6 7= 9 10 11 12 15=0A Validation 0 11 N 0 3 4 5 6 7 9 10 11 = 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Ap= ci_link12: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 11 = N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 11 N 0= 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6= 7 9 10 11 12 15=0Apci_link13: Index IRQ Rtd Ref IRQs=0A Initial= Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation = 0 10 N 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 25= 5 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link14: Index IRQ Rtd R= ef IRQs=0A Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15= =0A Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15=0A Afte= r Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15=0Apci_link15: = Index IRQ Rtd Ref IRQs=0A Initial Probe 0 14 N 0 3 4= 5 6 7 9 10 11 12 15=0A Validation 0 255 N 0 3 4 5 6 7 9 = 10 11 12 15=0A After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 = 15=0Apci_link16: Index IRQ Rtd Ref IRQs=0A Initial Probe 0= 11 N 0 3 4 5 6 7 9 10 11 12 15=0A Validation 0 11 N= 0 3 4 5 6 7 9 10 11 12 15=0A After Disable 0 255 N 0 3= 4 5 6 7 9 10 11 12 15=0Apci_link17: Index IRQ Rtd Ref IRQs=0A I= nitial Probe 0 255 N 0 16=0A Validation 0 255 N = 0 16=0A After Disable 0 255 N 0 16=0Apci_link18: = Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N 0 17=0A = Validation 0 255 N 0 17=0A After Disable 0 255 = N 0 17=0Apci_link19: Index IRQ Rtd Ref IRQs=0A Initial Prob= e 0 255 N 0 18=0A Validation 0 255 N 0 18= =0A After Disable 0 255 N 0 18=0Apci_link20: Index IR= Q Rtd Ref IRQs=0A Initial Probe 0 255 N 0 19=0A Validati= on 0 255 N 0 19=0A After Disable 0 255 N 0 = 19=0Apci_link21: Index IRQ Rtd Ref IRQs=0A Initial Probe 0= 255 N 0 16=0A Validation 0 255 N 0 16=0A After = Disable 0 255 N 0 16=0Apci_link22: Index IRQ Rtd Ref= IRQs=0A Initial Probe 0 255 N 0 17=0A Validation = 0 255 N 0 17=0A After Disable 0 255 N 0 17=0Apci_li= nk23: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N = 0 18=0A Validation 0 255 N 0 18=0A After Disable = 0 255 N 0 18=0Apci_link24: Index IRQ Rtd Ref IRQs=0A = Initial Probe 0 255 N 0 19=0A Validation 0 255 N= 0 19=0A After Disable 0 255 N 0 19=0Apci_link25: = Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N 0 20 21= 22 23=0A Validation 0 255 N 0 20 21 22 23=0A After Disa= ble 0 255 N 0 20 21 22 23=0Apci_link26: Index IRQ Rtd= Ref IRQs=0A Initial Probe 0 255 N 0 20 21 22 23=0A Valid= ation 0 255 N 0 20 21 22 23=0A After Disable 0 255= N 0 20 21 22 23=0Apci_link27: Index IRQ Rtd Ref IRQs=0A = Initial Probe 0 255 N 0 20 21 22 23=0A Validation 0= 255 N 0 20 21 22 23=0A After Disable 0 255 N 0 20 2= 1 22 23=0Apci_link28: Index IRQ Rtd Ref IRQs=0A Initial Probe = 0 255 N 0 20 21 22 23=0A Validation 0 255 N 0 = 20 21 22 23=0A After Disable 0 255 N 0 20 21 22 23=0Apci_li= nk29: Index IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N = 0 20 21 22 23=0A Validation 0 255 N 0 20 21 22 23=0A = After Disable 0 255 N 0 20 21 22 23=0Apci_link30: Inde= x IRQ Rtd Ref IRQs=0A Initial Probe 0 255 N 0 20 21 22 2= 3=0A Validation 0 255 N 0 20 21 22 23=0A After Disable = 0 255 N 0 20 21 22 23=0Apci_link31: Index IRQ Rtd Ref= IRQs=0A Initial Probe 0 255 N 0 20 21 22 23=0A Validation= 0 255 N 0 20 21 22 23=0A After Disable 0 255 N = 0 20 21 22 23=0Apci_link32: Index IRQ Rtd Ref IRQs=0A Initi= al Probe 0 255 N 0 20 21 22 23=0A Validation 0 255= N 0 20 21 22 23=0A After Disable 0 255 N 0 20 21 22 = 23=0Apci_link33: Index IRQ Rtd Ref IRQs=0A Initial Probe 0= 255 N 0 20 21 22 23=0A Validation 0 255 N 0 20 2= 1 22 23=0A After Disable 0 255 N 0 20 21 22 23=0Apcib0: port 0xcf8-0xcff on acpi0=0Apci0: on pcib= 0=0Apci0: domain=3D0, physical bus=3D0=0Afound-> vendor=3D0x10de, dev=3D0x0= 071, revid=3D0xc1=0A domain=3D0, bus=3D0, slot=3D0, func=3D0=0A class=3D06-= 00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0006, statreg=3D0x00b0, cach= elnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat= =3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x007f, revid=3D0xa1=0A dom= ain=3D0, bus=3D0, slot=3D0, func=3D1=0A class=3D05-00-00, hdrtype=3D0x00, m= fdev=3D1=0A cmdreg=3D0x0100, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A la= ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> = vendor=3D0x10de, dev=3D0x0075, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D= 0, func=3D2=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00= 00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min= gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x= 006f, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D0, func=3D3=0A class=3D05= -00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0100, statreg=3D0x00a0, cac= helnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat= =3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x00b4, revid=3D0xa1=0A dom= ain=3D0, bus=3D0, slot=3D0, func=3D4=0A class=3D05-00-00, hdrtype=3D0x00, m= fdev=3D0=0A cmdreg=3D0x0106, statreg=3D0x00a0, cachelnsz=3D0 (dwords)=0A la= ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> = vendor=3D0x10de, dev=3D0x0076, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D= 1, func=3D0=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00= 00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min= gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x= 0078, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D1, func=3D1=0A class=3D05= -00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cac= helnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat= =3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x0079, revid=3D0xa1=0A dom= ain=3D0, bus=3D0, slot=3D1, func=3D2=0A class=3D05-00-00, hdrtype=3D0x00, m= fdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A la= ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> = vendor=3D0x10de, dev=3D0x007a, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D= 1, func=3D3=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00= 00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min= gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x= 007b, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D1, func=3D4=0A class=3D05= -00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cac= helnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat= =3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x007c, revid=3D0xa1=0A dom= ain=3D0, bus=3D0, slot=3D1, func=3D5=0A class=3D05-00-00, hdrtype=3D0x00, m= fdev=3D1=0A cmdreg=3D0x0000, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A la= ttimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> = vendor=3D0x10de, dev=3D0x007d, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D= 1, func=3D6=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x00= 00, statreg=3D0x0020, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), min= gnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x= 007e, revid=3D0xa2=0A domain=3D0, bus=3D0, slot=3D2, func=3D0=0A class=3D06= -04-00, hdrtype=3D0x01, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cac= helnsz=3D16 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x0a (2500 ns), ma= xlat=3D0x00 (0 ns)=0A powerspec 2 supports D0 D3 current D0=0A MSI suppor= ts 2 messages, 64 bit=0Afound-> vendor=3D0x10de, dev=3D0x007e, revid=3D0xa2= =0A domain=3D0, bus=3D0, slot=3D4, func=3D0=0A class=3D06-04-00, hdrtype=3D= 0x01, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dword= s)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)= =0A powerspec 2 supports D0 D3 current D0=0A MSI supports 2 messages, 64 = bit=0Afound-> vendor=3D0x10de, dev=3D0x007e, revid=3D0xa2=0A domain=3D0, bu= s=3D0, slot=3D5, func=3D0=0A class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0A= cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A lattimer=3D0= x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)=0A powerspec 2 su= pports D0 D3 current D0=0A MSI supports 2 messages, 64 bit=0Afound-> vendo= r=3D0x10de, dev=3D0x0369, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D9, fu= nc=3D0=0A class=3D05-00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0106, s= tatreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt= =3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x036= 0, revid=3D0xa2=0A domain=3D0, bus=3D0, slot=3D10, func=3D0=0A class=3D06-0= 1-00, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x000f, statreg=3D0x00a0, cache= lnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat= =3D0x00 (0 ns)=0A map[18]: type I/O Port, range 32, base 0x4f00, size 8, e= nabled=0Afound-> vendor=3D0x10de, dev=3D0x0368, revid=3D0xa2=0A domain=3D0,= bus=3D0, slot=3D10, func=3D1=0A class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D= 1=0A cmdreg=3D0x0001, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer= =3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3Da, i= rq=3D9=0A powerspec 2 supports D0 D3 current D0=0A map[10]: type I/O Port= , range 32, base 0x4c00, size 6, enabled=0A map[20]: type I/O Port, range = 32, base 0x5000, size 6, enabled=0A map[24]: type I/O Port, range 32, base= 0x5100, size 6, enabled=0Apcib0: matched entry for 0.10.INTA (src \\_SB_.= AP12:0)=0Apci_link25: Picked IRQ 20 with weight 0=0Apcib0: slot 10 INTA rou= ted to irq 20 via \\_SB_.AP12=0Afound-> vendor=3D0x10de, dev=3D0x036c, revi= d=3D0xa1=0A domain=3D0, bus=3D0, slot=3D11, func=3D0=0A class=3D0c-03-10, h= drtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D= 0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01= (250 ns)=0A intpin=3Da, irq=3D10=0A powerspec 2 supports D0 D1 D2 D3 cur= rent D0=0A map[10]: type Memory, range 32, base 0xdfffc000, size 12, enable= d=0Apcib0: matched entry for 0.11.INTA (src \\_SB_.AP20:0)=0Apci_link30: Pi= cked IRQ 21 with weight 0=0Apcib0: slot 11 INTA routed to irq 21 via \\_SB_= AP20=0Afound-> vendor=3D0x10de, dev=3D0x036d, revid=3D0xa2=0A domain=3D0, = bus=3D0, slot=3D11, func=3D1=0A class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1= =0A cmdreg=3D0x0006, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer= =3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A intpin=3D= b, irq=3D10=0A powerspec 2 supports D0 D1 D2 D3 current D0=0A map[10]: ty= pe Memory, range 32, base 0xdfffbf00, size 8, enabled=0Apcib0: matched ent= ry for 0.11.INTB (src \\_SB_.AP13:0)=0Apci_link26: Picked IRQ 22 with weigh= t 0=0Apcib0: slot 11 INTB routed to irq 22 via \\_SB_.AP13=0Afound-> vendor= =3D0x10de, dev=3D0x036e, revid=3D0xa1=0A domain=3D0, bus=3D0, slot=3D13, fu= nc=3D0=0A class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0005, s= tatreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt= =3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A powerspec 2 supports D0 D3 cu= rrent D0=0A map[20]: type I/O Port, range 32, base 0xecf0, size 4, enabled= =0Afound-> vendor=3D0x10de, dev=3D0x037f, revid=3D0xa2=0A domain=3D0, bus= =3D0, slot=3D14, func=3D0=0A class=3D01-04-85, hdrtype=3D0x00, mfdev=3D1=0A= cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x= 00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A intpin=3Da, ir= q=3D11=0A powerspec 2 supports D0 D3 current D0=0A MSI supports 4 message= s, 64 bit=0A map[10]: type I/O Port, range 32, base 0xfe00, size 3, enable= d=0A map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled=0A map= [18]: type I/O Port, range 32, base 0xfe20, size 3, enabled=0A map[1c]: ty= pe I/O Port, range 32, base 0xfe30, size 2, enabled=0A map[20]: type I/O P= ort, range 32, base 0xfec0, size 4, enabled=0A map[24]: type Memory, range= 32, base 0xdfffd000, size 12, enabled=0Apcib0: matched entry for 0.14.INTA= (src \\_SB_.AP17:0)=0Apci_link29: Picked IRQ 23 with weight 0=0Apcib0: slo= t 14 INTA routed to irq 23 via \\_SB_.AP17=0Afound-> vendor=3D0x10de, dev= =3D0x037f, revid=3D0xa3=0A domain=3D0, bus=3D0, slot=3D14, func=3D1=0A clas= s=3D01-04-85, hdrtype=3D0x00, mfdev=3D1=0A cmdreg=3D0x0007, statreg=3D0x00b= 0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns)= , maxlat=3D0x01 (250 ns)=0A intpin=3Db, irq=3D11=0A powerspec 2 supports D= 0 D3 current D0=0A MSI supports 4 messages, 64 bit=0A map[10]: type I/O Po= rt, range 32, base 0xfe40, size 3, enabled=0A map[14]: type I/O Port, rang= e 32, base 0xfe50, size 2, enabled=0A map[18]: type I/O Port, range 32, ba= se 0xfe60, size 3, enabled=0A map[1c]: type I/O Port, range 32, base 0xfe7= 0, size 2, enabled=0A map[20]: type I/O Port, range 32, base 0xfed0, size = 4, enabled=0A map[24]: type Memory, range 32, base 0xdfffe000, size 12, en= abled=0Apcib0: matched entry for 0.14.INTB (src \\_SB_.AP16:0)=0Apci_link28= : Picked IRQ 20 with weight 1=0Apcib0: slot 14 INTB routed to irq 20 via \\= _SB_.AP16=0Afound-> vendor=3D0x10de, dev=3D0x037f, revid=3D0xa4=0A domain= =3D0, bus=3D0, slot=3D14, func=3D2=0A class=3D01-04-85, hdrtype=3D0x00, mfd= ev=3D1=0A cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)=0A latt= imer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250 ns)=0A intpi= n=3Dc, irq=3D11=0A powerspec 2 supports D0 D3 current D0=0A MSI supports = 4 messages, 64 bit=0A map[10]: type I/O Port, range 32, base 0xfe80, size = 3, enabled=0A map[14]: type I/O Port, range 32, base 0xfe90, size 2, enabl= ed=0A map[18]: type I/O Port, range 32, base 0xfea0, size 3, enabled=0A ma= p[1c]: type I/O Port, range 32, base 0xfeb0, size 2, enabled=0A map[20]: t= ype I/O Port, range 32, base 0xfef0, size 4, enabled=0A map[24]: type Memo= ry, range 32, base 0xdffff000, size 12, enabled=0Apcib0: matched entry for = 0.14.INTC (src \\_SB_.AP27:0)=0Apci_link33: Picked IRQ 21 with weight 1=0Ap= cib0: slot 14 INTC routed to irq 21 via \\_SB_.AP27=0Afound-> vendor=3D0x10= de, dev=3D0x0370, revid=3D0xa2=0A domain=3D0, bus=3D0, slot=3D15, func=3D0= =0A class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1=0A cmdreg=3D0x0107, statreg= =3D0x00b0, cachelnsz=3D0 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x02 = (500 ns), maxlat=3D0x00 (0 ns)=0Afound-> vendor=3D0x10de, dev=3D0x0376, rev= id=3D0xa2=0A domain=3D0, bus=3D0, slot=3D19, func=3D0=0A class=3D06-04-00, = hdrtype=3D0x01, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz= =3D16 (dwords)=0A lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D= 0x00 (0 ns)=0A powerspec 2 supports D0 D3 current D0=0A MSI supports 2 me= ssages, 64 bit=0Afound-> vendor=3D0x10de, dev=3D0x0377, revid=3D0xa2=0A dom= ain=3D0, bus=3D0, slot=3D24, func=3D0=0A class=3D06-04-00, hdrtype=3D0x01, = mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A = lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns)=0A pow= erspec 2 supports D0 D3 current D0=0A MSI supports 2 messages, 64 bit=0Ap= ci0: at device 0.1 (no driver attached)=0Apci0: = at device 0.2 (no driver attached)=0Apci0: at device 0.3 (no= driver attached)=0Apci0: at device 0.4 (no driver attached)= =0Apci0: at device 1.0 (no driver attached)=0Apci0: at device 1.1 (no driver attached)=0Apci0: at device 1.2= (no driver attached)=0Apci0: at device 1.3 (no driver attach= ed)=0Apci0: at device 1.4 (no driver attached)=0Apci0: at device 1.5 (no driver attached)=0Apci0: at device = 1.6 (no driver attached)=0Apcib1: at device 2.0 on pc= i0=0Apcib1: domain 0=0Apcib1: secondary bus 1=0Apcib1: = subordinate bus 1=0Apcib1: I/O decode 0xd000-0xdfff=0Apcib1: = memory decode 0xdb000000-0xdeffffff=0Apcib1: prefetched decode 0xa000= 0000-0xafffffff=0Apci1: on pcib1=0Apci1: domain=3D0, physica= l bus=3D1=0Afound-> vendor=3D0x10de, dev=3D0x0191, revid=3D0xa2=0A domain= =3D0, bus=3D1, slot=3D0, func=3D0=0A class=3D03-00-00, hdrtype=3D0x00, mfde= v=3D0=0A cmdreg=3D0x0003, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A latt= imer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3D= a, irq=3D11=0A powerspec 2 supports D0 D3 current D0=0A MSI supports 1 me= ssage, 64 bit=0A map[10]: type Memory, range 32, base 0xde000000, size 24, = enabled=0Apcib1: requested memory range 0xde000000-0xdeffffff: good=0A map[= 14]: type Prefetchable Memory, range 64, base 0xa0000000, size 28, enabled= =0Apcib1: requested memory range 0xa0000000-0xafffffff: good=0A map[1c]: ty= pe Memory, range 64, base 0xdc000000, size 25, enabled=0Apcib1: requested m= emory range 0xdc000000-0xddffffff: good=0A map[24]: type I/O Port, range 32= , base 0xdc80, size 7, enabled=0Apcib1: requested I/O range 0xdc80-0xdcff:= in range=0Apcib1: matched entry for 1.0.INTA (src \\_SB_.AP04:0)=0Apci_lin= k21: Picked IRQ 16 with weight 0=0Apcib1: slot 0 INTA routed to irq 16 via = \\_SB_.AP04=0Avgapci0: port 0xdc80-0xdcff mem 0xde= 000000-0xdeffffff,0xa0000000-0xafffffff,0xdc000000-0xddffffff irq 16 at dev= ice 0.0 on pci1=0Apcib2: at device 4.0 on pci0=0Apcib= 2: domain 0=0Apcib2: secondary bus 2=0Apcib2: subordin= ate bus 2=0Apcib2: I/O decode 0xf000-0xfff=0Apcib2: no prefetc= hed decode=0Apci2: on pcib2=0Apci2: domain=3D0, physical bus= =3D2=0Apcib3: at device 5.0 on pci0=0Apcib3: domain= 0=0Apcib3: secondary bus 3=0Apcib3: subordinate bus 3= =0Apcib3: I/O decode 0xf000-0xfff=0Apcib3: no prefetched decode= =0Apci3: on pcib3=0Apci3: domain=3D0, physical bus=3D3=0Apci= 0: at device 9.0 (no driver attached)=0Aisab0: port 0x4f00-0x4fff at device 10.0 on pci0=0Aisa0: on isab0=0Ap= ci0: at device 10.1 (no driver attached)=0Aohci0: mem 0xdfffc000-0xdfffcfff irq 21 at device 11.0 = on pci0=0Aohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffc000=0A= ioapic0: routing intpin 21 (PCI IRQ 21) to vector 49=0Aohci0: [GIANT-LOCKED= ]=0Aohci0: [ITHREAD]=0Ausb0: OHCI version 1.0, legacy support=0Ausb0: SMM d= oes not respond, resetting=0Ausb0: on ohci0= =0Ausb0: USB revision 1.0=0Auhub0: on usb0=0Auhub0: 10 ports with 10 removable, self powered= =0Aehci0: mem 0xdfffbf00-0xdfffbfff irq= 22 at device 11.1 on pci0=0Aehci0: Reserved 0x100 bytes for rid 0x10 type = 3 at 0xdfffbf00=0Aioapic0: routing intpin 22 (PCI IRQ 22) to vector 50=0Aeh= ci0: [GIANT-LOCKED]=0Aehci0: [ITHREAD]=0Ausb1: waiting for BIOS to give up = control=0Ausb1: EHCI version 1.0=0Ausb1: companion controller, 10 ports eac= h: usb0=0Ausb1: on ehci0=0Ausb1: USB re= vision 2.0=0Auhub1: on usb1=0Auhub1: 10 ports with 10 removable, self powered=0Aumass0: on uhub1=0Aumass0:0= :0:-1: Attached to scbus0=0Augen0: on uhub1=0Aumass1: on uhub1=0Aumass1:1:1:-1: Attached to scbus1=0Aatapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xecf0-0xe= cff at device 13.0 on pci0=0Aatapci0: Reserved 0x10 bytes for rid 0x20 type= 4 at 0xecf0=0Aata0: on atapci0=0Aatapci0: Reserved 0x8 byt= es for rid 0x10 type 4 at 0x1f0=0Aatapci0: Reserved 0x1 bytes for rid 0x14 = type 4 at 0x3f6=0Aata0: reset tp1 mask=3D03 ostat0=3D60 ostat1=3D70=0Aata0:= stat0=3D0x20 err=3D0x20 lsb=3D0x20 msb=3D0x20=0Aata0: stat1=3D0x30 err=3D0= x30 lsb=3D0x30 msb=3D0x30=0Aata0: reset tp2 stat0=3D20 stat1=3D30 devices= =3D0x0=0Aioapic0: routing intpin 14 (ISA IRQ 14) to vector 51=0Aata0: [MPSA= FE]=0Aata0: [ITHREAD]=0Aata1: on atapci0=0Aatapci0: Reserve= d 0x8 bytes for rid 0x18 type 4 at 0x170=0Aatapci0: Reserved 0x1 bytes for = rid 0x1c type 4 at 0x376=0Aata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Df= f=0Aioapic0: routing intpin 15 (ISA IRQ 15) to vector 52=0Aata1: [MPSAFE]= =0Aata1: [ITHREAD]=0Aatapci1: port= 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf mem = 0xdfffd000-0xdfffdfff irq 23 at device 14.0 on pci0=0Aatapci1: Reserved 0x1= 0 bytes for rid 0x20 type 4 at 0xfec0=0Aioapic0: routing intpin 23 (PCI IRQ= 23) to vector 53=0Aatapci1: [MPSAFE]=0Aatapci1: [ITHREAD]=0Aatapci1: Reser= ved 0x1000 bytes for rid 0x24 type 3 at 0xdfffd000=0Aata2: = on atapci1=0Aatapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe00=0Aat= apci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe10=0Aata2: SATA connec= t time=3D0ms=0Aata2: reset tp1 mask=3D01 ostat0=3D50 ostat1=3D00=0Aata2: st= at0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0Aata2: reset tp2 stat0=3D50 st= at1=3D00 devices=3D0x1=0Aata2: [MPSAFE]=0Aata2: [ITHREAD]=0Aata= 3: on atapci1=0Aatapci1: Reserved 0x8 bytes for rid 0x18 ty= pe 4 at 0xfe20=0Aatapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfe30= =0Aata3: SATA connect time=3D0ms=0Aata3: reset tp1 mask=3D01 ostat0=3D50 os= tat1=3D00=0Aata3: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0Aata3: res= et tp2 stat0=3D50 stat1=3D00 devices=3D0x1=0Aata3: [MPSAFE]=0Aa= ta3: [ITHREAD]=0Aatapci2: port 0xf= e40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed0-0xfedf mem 0xdf= ffe000-0xdfffefff irq 20 at device 14.1 on pci0=0Aatapci2: Reserved 0x10 by= tes for rid 0x20 type 4 at 0xfed0=0Aioapic0: routing intpin 20 (PCI IRQ 20)= to vector 54=0Aatapci2: [MPSAFE]=0Aatapci2: [ITHREAD]=0Aatapci2: Reserved = 0x1000 bytes for rid 0x24 type 3 at 0xdfffe000=0Aata4: on a= tapci2=0Aatapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe40=0Aatapci= 2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe50=0Aata4: SATA connect ti= me=3D0ms=0Aata4: reset tp1 mask=3D01 ostat0=3D50 ostat1=3D00=0Aata4: stat0= =3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0Aata4: reset tp2 stat0=3D10 stat1= =3D00 devices=3D0x4=0Aata4: [MPSAFE]=0Aata4: [ITHREAD]=0Aata5= : on atapci2=0Aatapci2: Reserved 0x8 bytes for rid 0x18 typ= e 4 at 0xfe60=0Aatapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfe70= =0Aata5: SATA connect time=3D0ms=0Aata5: reset tp1 mask=3D01 ostat0=3D50 os= tat1=3D00=0Aata5: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0Aata5: res= et tp2 stat0=3D00 stat1=3D00 devices=3D0x4=0Aata5: [MPSAFE]= =0Aata5: [ITHREAD]=0Aatapci3: port= 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff mem = 0xdffff000-0xdfffffff irq 21 at device 14.2 on pci0=0Aatapci3: Reserved 0x1= 0 bytes for rid 0x20 type 4 at 0xfef0=0Aatapci3: [MPSAFE]=0Aatapci3: [ITHRE= AD]=0Aatapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdffff000=0Aat= a6: on atapci3=0Aatapci3: Reserved 0x8 bytes for rid 0x10 t= ype 4 at 0xfe80=0Aatapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe90= =0Aata6: SATA connect time=3D0ms=0Aata6: reset tp1 mask=3D01 ostat0=3D50 os= tat1=3D00=0Aata6: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0Aata6: res= et tp2 stat0=3D50 stat1=3D00 devices=3D0x1=0Aata6: [MPSAFE]=0Aa= ta6: [ITHREAD]=0Aata7: on atapci3=0Aatapci3: Reserved 0x8 b= ytes for rid 0x18 type 4 at 0xfea0=0Aatapci3: Reserved 0x4 bytes for rid 0x= 1c type 4 at 0xfeb0=0Aata7: SATA connect time=3D0ms=0Aata7: reset tp1 mask= =3D01 ostat0=3D50 ostat1=3D00=0Aata7: stat0=3D0x50 err=3D0x01 lsb=3D0x00 ms= b=3D0x00=0Aata7: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1= =0Aata7: [MPSAFE]=0Aata7: [ITHREAD]=0Apcib4: at devic= e 15.0 on pci0=0Apcib4: domain 0=0Apcib4: secondary bus = 4=0Apcib4: subordinate bus 4=0Apcib4: I/O decode 0xc000-0xcfff= =0Apcib4: memory decode 0xd4000000-0xdaffffff=0Apcib4: prefetched d= ecode 0xb0000000-0xb0ffffff=0Apcib4: Subtractively decoded bridge.=0Apci4= : on pcib4=0Apci4: domain=3D0, physical bus=3D4=0Afound-> ve= ndor=3D0x1971, dev=3D0x1011, revid=3D0x00=0A domain=3D0, bus=3D4, slot=3D4,= func=3D0=0A class=3Dff-00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0117= , statreg=3D0x0288, cachelnsz=3D16 (dwords)=0A lattimer=3D0x40 (1920 ns), m= ingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3Da, irq=3D11=0A map[10= ]: type Prefetchable Memory, range 64, base 0xb0000000, size 24, enabled=0A= pcib4: requested memory range 0xb0000000-0xb0ffffff: good=0A map[18]: type = I/O Port, range 32, base 0xcc00, size 8, enabled=0Apcib4: requested I/O ra= nge 0xcc00-0xccff: in range=0Apcib4: matched entry for 4.4.INTA (src \\_SB_= AP00:0)=0Apci_link17: Picked IRQ 16 with weight 3=0Apcib4: slot 4 INTA rou= ted to irq 16 via \\_SB_.AP00=0Afound-> vendor=3D0x1102, dev=3D0x0005, revi= d=3D0x00=0A domain=3D0, bus=3D4, slot=3D5, func=3D0=0A class=3D04-01-00, hd= rtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D1= 6 (dwords)=0A lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D= 0x05 (1250 ns)=0A intpin=3Da, irq=3D10=0A powerspec 2 supports D0 D1 D2 D3= current D0=0A MSI supports 1 message, 64 bit=0A map[10]: type I/O Port, r= ange 32, base 0xc8e0, size 5, enabled=0Apcib4: requested I/O range 0xc8e0-= 0xc8ff: in range=0A map[14]: type Memory, range 64, base 0xdae00000, size 2= 1, enabled=0Apcib4: requested memory range 0xdae00000-0xdaffffff: good=0A m= ap[1c]: type Memory, range 64, base 0xd4000000, size 26, enabled=0Apcib4: r= equested memory range 0xd4000000-0xd7ffffff: good=0Apcib4: matched entry fo= r 4.5.INTA (src \\_SB_.AP01:0)=0Apci_link18: Picked IRQ 17 with weight 0=0A= pcib4: slot 5 INTA routed to irq 17 via \\_SB_.AP01=0Afound-> vendor=3D0x10= 4c, dev=3D0x8023, revid=3D0x00=0A domain=3D0, bus=3D4, slot=3D10, func=3D0= =0A class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0=0A cmdreg=3D0x0116, statreg= =3D0x0210, cachelnsz=3D16 (dwords)=0A lattimer=3D0x40 (1920 ns), mingnt=3D0= x02 (500 ns), maxlat=3D0x04 (1000 ns)=0A intpin=3Da, irq=3D9=0A powerspec 2= supports D0 D1 D2 D3 current D0=0A map[10]: type Memory, range 32, base = 0xdadfb800, size 11, enabled=0Apcib4: requested memory range 0xdadfb800-0xd= adfbfff: good=0A map[14]: type Memory, range 32, base 0xdadfc000, size 14, = enabled=0Apcib4: requested memory range 0xdadfc000-0xdadfffff: good=0Apcib4= : matched entry for 4.10.INTA (src \\_SB_.AP02:0)=0Apci_link19: Picked IRQ = 18 with weight 0=0Apcib4: slot 10 INTA routed to irq 18 via \\_SB_.AP02=0Ap= ci4: at device 4.0 (no driver attached)=0Apci4: at device 5.0 (no driver attached)=0Afwohci0: mem 0xdadfb800-0xdadfbfff,0xdadfc000-0xdadfffff irq 18 at device 10.0= on pci4=0Afwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdadfb800= =0Aioapic0: routing intpin 18 (PCI IRQ 18) to vector 55=0Afwohci0: [MPSAFE]= =0Afwohci0: [FILTER]=0Afwohci0: OHCI version 1.10 (ROM=3D0)=0Afwohci0: No. = of Isochronous channels is 4.=0Afwohci0: EUI64 80:00:00:00:00:00:00:00=0Afw= ohci0: Phy 1394a available S400, 2 ports.=0Afwohci0: Link S400, max_rec 204= 8 bytes.=0Afirewire0: on fwohci0=0Afwe0: on firewire0=0Aif_fwe0: Fake Ethernet address: 82:00:00:00:= 00:00=0Afwe0: bpf attached=0Afwe0: Ethernet address: 82:00:00:00:00:00=0Afw= ip0: on firewire0=0Afwip0: bpf attached=0Afwip0: Firewir= e address: 80:00:00:00:00:00:00:00 @ 0xfffe00000000, S400, maxrec 2048=0Asb= p0: on firewire0=0Adcons_crom0: on firewire0=0Adcons_crom0: bus_addr 0x228c000=0Afwohci0: Initiat= e bus reset=0Afwohci0: BUS reset=0Afwohci0: node_id=3D0xc800ffc0, gen=3D1, = CYCLEMASTER mode=0Apcib5: at device 19.0 on pci0=0Apc= ib5: domain 0=0Apcib5: secondary bus 5=0Apcib5: subord= inate bus 5=0Apcib5: I/O decode 0xf000-0xfff=0Apcib5: no prefe= tched decode=0Apci5: on pcib5=0Apci5: domain=3D0, physical b= us=3D5=0Apcib6: at device 24.0 on pci0=0Apcib6: dom= ain 0=0Apcib6: secondary bus 6=0Apcib6: subordinate bus = 6=0Apcib6: I/O decode 0xb000-0xbfff=0Apcib6: memory decode = 0xd0000000-0xd3ffffff=0Apcib6: prefetched decode 0xb1000000-0xcfffffff= =0Apci6: on pcib6=0Apci6: domain=3D0, physical bus=3D6=0Afou= nd-> vendor=3D0x10de, dev=3D0x0191, revid=3D0xa2=0A domain=3D0, bus=3D6, sl= ot=3D0, func=3D0=0A class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0A cmdreg= =3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A lattimer=3D0x00 (0 = ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A intpin=3Da, irq=3D11=0A = powerspec 2 supports D0 D3 current D0=0A MSI supports 1 message, 64 bit= =0A map[10]: type Memory, range 32, base 0xd1000000, size 24, memory disabl= ed=0Apcib6: requested memory range 0xd1000000-0xd1ffffff: good=0A map[14]: = type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled=0Apci= b6: requested memory range 0xc0000000-0xcfffffff: good=0A map[1c]: type Mem= ory, range 64, base 0xd2000000, size 25, enabled=0Apcib6: requested memory = range 0xd2000000-0xd3ffffff: good=0A map[24]: type I/O Port, range 32, base= 0xbc80, size 7, port disabled=0Apcib6: requested I/O range 0xbc80-0xbcff:= in range=0Apcib6: matched entry for 6.0.INTA (src \\_SB_.AP04:0)=0Apcib6: = slot 0 INTA routed to irq 16 via \\_SB_.AP04=0Avgapci1: port 0xbc80-0xbcff mem 0xd1000000-0xd1ffffff,0xc0000000-0xcfffffff,0x= d2000000-0xd3ffffff irq 16 at device 0.0 on pci6=0Aacpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0=0Aacpi_hpet0: vend: 0= x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route=0ATimecounter "HPET" = frequency 25000000 Hz quality 900=0Acpu0: on acpi0=0Acpu0: switc= hing to generic Cx mode=0Aest0: enabling SpeedStep=0Aest0: on cpu0=0Aest: CPU supports Enhanced Speedstep, but = is not recognized.=0Aest: cpu_vendor GenuineIntel, msr c380c3886000c38=0Ade= vice_attach: est0 attach returned 6=0Ap4tcc0: on cpu0=0Acpu1: on acpi0=0Aest1: on cpu1=0Aest: CPU supports Enhanced Speedstep, but is not recog= nized.=0Aest: cpu_vendor GenuineIntel, msr c380c3886000c38=0Adevice_attach:= est1 attach returned 6=0Ap4tcc1: on cpu1= =0Acpu2: on acpi0=0Aest2: = on cpu2=0Aest: CPU supports Enhanced Speedstep, but is not recognized.=0Ae= st: cpu_vendor GenuineIntel, msr c380c3886000c38=0Adevice_attach: est2 atta= ch returned 6=0Ap4tcc2: on cpu2=0Acpu3: on acpi0=0Aest3: on cpu3=0Ae= st: CPU supports Enhanced Speedstep, but is not recognized.=0Aest: cpu_vend= or GenuineIntel, msr c380c3886000c38=0Adevice_attach: est3 attach returned = 6=0Ap4tcc3: on cpu3=0Aacpi_button0: on acpi0=0Aatrtc0: port 0x70-0x7f irq 8 on acpi= 0=0Aatrtc0: registered as a time-of-day clock (resolution 1000000us)=0Aatkb= dc0: port 0x60,0x64 irq 1 on acpi0=0Aatkbd0: = irq 1 on atkbdc0=0Aatkbd: the current kbd controller command = byte 0065=0Aatkbd: keyboard ID 0x41ab (2)=0Akbd0 at atkbd0=0Akbd0: atkbd0, = AT 101/102 (2), config:0x0, flags:0x3d0000=0Aioapic0: routing intpin 1 (ISA= IRQ 1) to vector 56=0Aatkbd0: [GIANT-LOCKED]=0Aatkbd0: [ITHREAD]=0Apsm0: u= nable to allocate IRQ=0Apsmcpnp0: irq 12 on acpi0=0Apsm0:= current command byte:0065=0Apsm0: irq 12 on atkbdc0=0Aioapic0= : routing intpin 12 (ISA IRQ 12) to vector 57=0Apsm0: [GIANT-LOCKED]=0Apsm0= : [ITHREAD]=0Apsm0: model MouseMan+, device ID 0-83, 3 buttons=0Apsm0: conf= ig:00000000, flags:00000008, packet size:3=0Apsm0: syncmask:08, syncbits:00= =0Asio0: irq maps: 0xc01 0xc11 0xc01 0xc01=0Asio0: irq maps: 0xc01 0xc11 0x= c01 0xc01=0Asio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags= 0x10 on acpi0=0Asio0: type 16550A=0Aioapic0: routing intpin 4 (ISA IRQ 4) = to vector 58=0Asio0: [FILTER]=0Aex_isa_identify()=0Aatkbdc: atkbdc0 already= exists; skipping it=0Asio: sio0 already exists; skipping it=0Aahc_isa_prob= e 4: ioport 0x4c00 alloc failed=0Aahc_isa_probe 5: ioport 0x5c00 alloc fail= ed=0Aahc_isa_probe 11: ioport 0xbc00 alloc failed=0Aahc_isa_probe 12: iopor= t 0xcc00 alloc failed=0Aahc_isa_probe 13: ioport 0xdc00 alloc failed=0Aahc_= isa_probe 14: ioport 0xec00 alloc failed=0Asc: sc0 already exists; skipping= it=0Avga: vga0 already exists; skipping it=0Aisa_probe_children: disabling= PnP devices=0Aisa_probe_children: probing non-PnP devices=0Aorm0: at iomem 0xc0000-0xcc7ff,0xcc800-0xce7ff,0xce800-0xcffff on isa0= =0Afdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0Appc= 0: cannot reserve I/O port range=0Appc0: failed to probe at= irq 7 on isa0=0Asc0: at flags 0x100 on isa0=0Asc0: VGA <1= 6 virtual consoles, flags=3D0x300>=0Asc0: fb0, kbd1, terminal emulator: sc = (syscons terminal)=0Asio1: configured irq 3 not in bitmap of probed irqs 0= =0Asio1: port may not be enabled=0Asio1: irq maps: 0xc01 0xc01 0xc01 0xc01= =0Asio1: probe failed test(s): 0 1 2 4 6 7 9=0Asio1 failed to probe at port= 0x2f8-0x2ff irq 3 on isa0=0Asio2: not probed (disabled)=0Asio3: not probed= (disabled)=0Avga0: at port 0x3c0-0x3df iomem 0xa0000-0xb= ffff on isa0=0Aisa_probe_children: probing PnP devices=0ADevice configurati= on finished.=0AReducing kern.maxvnodes 257157 -> 100000=0Aprocfs registered= =0AWARNING: ZFS is considered to be an experimental feature in FreeBSD.=0Al= apic: Divisor 2, Frequency 133002215 hz=0ATimecounter "TSC" frequency 31920= 53112 Hz quality -100=0ATimecounters tick every 1.000 msec=0Alo0: bpf attac= hed=0Ahptrr: no controller detected.firewire0: 1 nodes, maxhop <=3D 0, cabl= e IRM =3D 0 (me)=0Afirewire0: bus manager 0 (me)=0A=0AZFS filesystem versio= n 6=0AZFS storage pool version 6=0Aata2-master: pio=3DPIO4 wdma=3DWDMA2 udm= a=3DUDMA133 cable=3D40 wire=0Aad4: 305245MB at ata2-master SATA300=0Aad4: 625142448 sectors [620181C/16H/63S] 16 se= ctors/interrupt 1 depth queue=0AGEOM: new disk ad4=0Aad4: nVidia check1 fai= led=0Aad4: Adaptec check1 failed=0Aad4: LSI (v3) check1 failed=0Aad4: LSI (= v2) check1 failed=0Aad4: FreeBSD check1 failed=0Aata3-master: pio=3DPIO4 wd= ma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0Aad6: 305245MB at ata3-master SATA300=0Aad6: 625142448 sectors [620181C/= 16H/63S] 16 sectors/interrupt 1 depth queue=0Aad6: nVidia check1 failed=0Aa= d6: Adaptec check1 failed=0Aad6: LSI (v3) check1 failed=0Aad6: LSI (v2) che= ck1 failed=0Aad6: FreeBSD check1 failed=0Aata4-master: pio=3DPIO4 wdma=3DWD= MA2 udma=3DUDMA33 cable=3D40 wire=0Aacd0: CDRW drive at ata4 as master=0Aacd0: read 1377KB/s (8268KB/s) write 8= 268KB/s (8268KB/s), 1536KB buffer, SATA150=0Aacd0: Reads: CDR, CDRW, CDDA s= tream, DVDROM, DVDR, packet=0Aacd0: Writes: CDR, CDRW, test write, burnproo= f=0Aacd0: Audio: play, 256 volume levels=0Aacd0: Mechanism: ejectable tray,= unlocked=0Aacd0: Medium: no/blank disc=0Aata5-master: pio=3DPIO4 wdma=3DWD= MA2 udma=3DUDMA33 cable=3D40 wire=0AGEOM_LABEL: Label for provider ad4s2 is= ntfs/System.=0AGEOM: new disk ad6=0Aacd1: DVDR drive at ata5 as master=0Aacd1: read 8269KB/s (8269KB/s) write 8269K= B/s (8269KB/s), 2048KB buffer, SATA150=0Aacd1: Reads: CDR, CDRW, CDDA strea= m, DVDROM, DVDR, packet=0Aacd1: Writes: CDR, CDRW, DVDR, test write, burnpr= oof=0Aacd1: Audio: play, 256 volume levels=0Aacd1: Mechanism: ejectable tra= y, unlocked=0Aacd1: Medium: CD-ROM unknown=0Aata6-master: pio=3DPIO4 wdma= =3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0Aad12: 305245MB at ata6-master SATA300=0Aad12: 625142448 sectors [620181C/= 16H/63S] 16 sectors/interrupt 1 depth queue=0Aad12: nVidia check1 failed=0A= ad12: Adaptec check1 failed=0Aad12: LSI (v3) check1 failed=0Aad12: LSI (v2)= check1 failed=0Aad12: FreeBSD check1 failed=0Aata7-master: pio=3DPIO4 wdma= =3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0Aad14: 305245MB at ata7-master SATA300=0Aad14: 625142448 sectors [620181C/= 16H/63S] 16 sectors/interrupt 1 depth queue=0AGEOM: new disk ad12=0Aad14: n= Vidia check1 failed=0Aad14: Adaptec check1 failed=0Aad14: LSI (v3) check1 f= ailed=0Aad14: LSI (v2) check1 failed=0Aad14: FreeBSD check1 failed=0AGEOM: = new disk ad14=0AGEOM_MIRROR: Device mirror/root launched (4/4).=0AWARNING: = Expected rawoffset 0, found 63=0A(probe8:sbp0:0:6:0): error 22=0A(probe8:sb= p0:0:6:0): Unretryable Error=0A(probe2:sbp0:0:0:0): error 22=0A(probe2:sbp0= :0:0:0): Unretryable Error=0A(probe3:sbp0:0:1:0): error 22=0A(probe3:sbp0:0= :1:0): Unretryable Error=0A(probe4:sbp0:0:2:0): error 22=0A(probe4:sbp0:0:2= :0): Unretryable Error=0A(probe5:sbp0:0:3:0): error 22=0A(probe5:sbp0:0:3:0= ): Unretryable Error=0A(probe6:sbp0:0:4:0): error 22=0A(probe6:sbp0:0:4:0):= Unretryable Error=0A(probe7:sbp0:0:5:0): error 22=0A(probe7:sbp0:0:5:0): U= nretryable Error=0Apass0 at umass-sim0 bus 0 target 0 lun 0=0Apass0: Fixed Direct Access SCSI-4 device=20=0Apass0: Ser= ial Number 5QG1400G=0Apass0: 40.000MB/s transfers=0Apass1 at um= ass-sim1 bus 1 target 0 lun 0=0Apass1: Removab= le Direct Access SCSI-0 device=20=0Apass1: 40.000MB/s transfers=0Apass2 at = umass-sim1 bus 1 target 0 lun 1=0Apass2: Removab= le Direct Access SCSI-0 device=20=0Apass2: 40.000MB/s transfers=0Apass3 at = umass-sim1 bus 1 target 0 lun 2=0Apass3: Remov= able Direct Access SCSI-0 device=20=0Apass3: 40.000MB/s transfers=0Apass4 a= t umass-sim1 bus 1 target 0 lun 3=0Apass4: Rem= ovable Direct Access SCSI-0 device=20=0Apass4: 40.000MB/s transfers=0AGEOM:= new disk da0=0AGEOM: new disk da1=0AGEOM: new disk da2da0 at umass-sim0 bu= s 0 target 0 lun 0=0Ada0: Fixed Direct Acce= ss SCSI-4 device=20=0Ada0: Serial Number 5QG1400G=0Ada0: 40.000= MB/s transfers=0Ada0: 476940MB (976773168 512 byte sectors: 255H 63S/T 6080= 1C)=0A=0AGEOM: new disk da3=0AATA PseudoRAID loaded=0Alapic1: Forcing LINT1= to edge trigger=0ASMP: AP CPU #1 Launched!=0Acpu1 AP:=0A ID: 0x0100000= 0 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint0: 0x00010700 l= int1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: 0x000200ef ther= m: 0x00010000 err: 0x00010000 pcm: 0x00010000=0Alapic3: Forcing LINT1 to ed= ge trigger=0ASMP: AP CPU #3 Launched!=0Acpu3 AP:=0A ID: 0x03000000 VE= R: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint0: 0x00010700 lint1: = 0x00008400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: 0x000200ef therm: 0x0= 0010000 err: 0x00010000 pcm: 0x00010000=0Alapic2: Forcing LINT1 to edge tri= gger=0ASMP: AP CPU #2 Launched!=0Acpu2 AP:=0A ID: 0x02000000 VER: 0x0= 0050014 LDR: 0x00000000 DFR: 0xffffffff=0A lint0: 0x00010700 lint1: 0x0000= 8400 TPR: 0x00000000 SVR: 0x000001ff=0A timer: 0x000200ef therm: 0x0001000= 0 err: 0x00010000 pcm: 0x00010000=0Aioapic0: Assigning ISA IRQ 1 to local A= PIC 0=0Aioapic0: Assigning ISA IRQ 4 to local APIC 1=0Aioapic0: Assigning I= SA IRQ 9 to local APIC 2=0Aioapic0: Assigning ISA IRQ 12 to local APIC 3=0A= ioapic0: Assigning ISA IRQ 14 to local APIC 0=0Aioapic0: Assigning ISA IRQ = 15 to local APIC 1=0Aioapic0: Assigning PCI IRQ 18 to local APIC 2=0Aioapic= 0: Assigning PCI IRQ 20 to local APIC 3=0Aioapic0: Assigning PCI IRQ 21 to = local APIC 0=0Aioapic0: Assigning PCI IRQ 22 to local APIC 1=0Aioapic0: Ass= igning PCI IRQ 23 to local APIC 2=0AWARNING: WITNESS option enabled, expect= reduced performance.=0A(da1:umass-sim1:1:0:0): error 6=0A(da1:umass-sim1:1= :0:0): Unretryable Error=0Ada1 at umass-sim1 bus 1 target 0 lun 0=0Ada1: Removable Direct Access SCSI-0 device=20=0Ada1: = 40.000MB/s transfers=0Ada1: Attempt to query device size failed: NOT READY,= Medium not present=0A(da2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0= :1): Unretryable Error=0Ada2 at umass-sim1 bus 1 target 0 lun 1=0Ada2: Removable Direct Access SCSI-0 device=20=0Ada2: 40.0= 00MB/s transfers=0Ada2: Attempt to query device size failed: NOT READY, Med= ium not present=0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-sim1:1:0:2):= Unretryable Error=0Ada3 at umass-sim1 bus 1 target 0 lun 2=0Ada3: Removable Direct Access SCSI-0 device=20=0Ada3: 40.000= MB/s transfers=0Ada3: Attempt to query device size failed: NOT READY, Mediu= m not present=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:umass-sim1:1:0:3): U= nretryable Error=0Ada4 at umass-sim1 bus 1 target 0 lun 3=0Ada4: Removable Direct Access SCSI-0 device=20=0Ada4: 40.000MB= /s transfers=0Ada4: Attempt to query device size failed: NOT READY, Medium = not present=0A(da1:umass-sim1:1:0:0): error 6=0A(da1:umass-sim1:1:0:0): Unr= etryable Error=0AOpened disk da1 -> 6=0A(da1:umass-sim1:1:0:0): error 6=0A(= da1:umass-sim1:1:0:0): Unretryable Error=0AOpened disk da1 -> 6=0A(da1:umas= s-sim1:1:0:0): error 6=0A(da1:umass-sim1:1:0:0): Unretryable Error=0AOpened= disk da1 -> 6=0A(da1:umass-sim1:1:0:0): error 6=0A(da1:umass-sim1:1:0:0): = Unretryable Error=0AOpened disk da1 -> 6=0A(da1:umass-sim1:1:0:0): error 6= =0A(da1:umass-sim1:1:0:0): Unretryable Error=0AOpened disk da1 -> 6=0A(da2:= umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0:1): Unretryable Error=0AOp= ened disk da2 -> 6=0A(da2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0:= 1): Unretryable Error=0AOpened disk da2 -> 6=0A(da2:umass-sim1:1:0:1): erro= r 6=0A(da2:umass-sim1:1:0:1): Unretryable Error=0AOpened disk da2 -> 6=0A(d= a2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1:1:0:1): Unretryable Error= =0AOpened disk da2 -> 6=0A(da2:umass-sim1:1:0:1): error 6=0A(da2:umass-sim1= :1:0:1): Unretryable Error=0AOpened disk da2 -> 6=0A(da3:umass-sim1:1:0:2):= error 6=0A(da3:umass-sim1:1:0:2): Unretryable Error=0AOpened disk da3 -> 6= =0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-sim1:1:0:2): Unretryable Er= ror=0AOpened disk da3 -> 6=0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-s= im1:1:0:2): Unretryable Error=0AOpened disk da3 -> 6=0A(da3:umass-sim1:1:0:= 2): error 6=0A(da3:umass-sim1:1:0:2): Unretryable Error=0AOpened disk da3 -= > 6=0A(da3:umass-sim1:1:0:2): error 6=0A(da3:umass-sim1:1:0:2): Unretryable= Error=0AOpened disk da3 -> 6=0AGEOM: new disk da4=0AGEOM_LABEL: Label for = provider da0s1 is ntfs/Backup.=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:uma= ss-sim1:1:0:3): Unretryable Error=0AOpened disk da4 -> 6=0A(da4:umass-sim1:= 1:0:3): error 6=0A(da4:umass-sim1:1:0:3): Unretryable Error=0AOpened disk d= a4 -> 6=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:umass-sim1:1:0:3): Unretry= able Error=0AOpened disk da4 -> 6=0A(da4:umass-sim1:1:0:3): error 6=0A(da4:= umass-sim1:1:0:3): Unretryable Error=0AOpened disk da4 -> 6=0A(da4:umass-si= m1:1:0:3): error 6=0A(da4:umass-sim1:1:0:3): Unretryable Error=0AOpened dis= k da4 -> 6=0Alock order reversal: (sleepable after non-sleepable)=0A 1st 0x= ffffff000482a028 struct mount mtx (struct mount mtx) @ /usr/home/sandbox/de= bug2/src/sys/kern/vfs_subr.c:343=0A 2nd 0xffffff000482a000 vfslock (vfslock= ) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_subr.c:370=0AKDB: stack backt= race:=0Adb_trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitness_che= ckorder() at witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmgr_args+= 0xc5e=0Avfs_busy() at vfs_busy+0xd0=0Avfs_mount_alloc() at vfs_mount_alloc+= 0x80=0Avfs_mountroot() at vfs_mountroot+0x23b=0Astart_init() at start_init+= 0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fork_trampolin= e+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp =3D 0 ---=0A= lock order reversal: (sleepable after non-sleepable)=0A 1st 0xffffff000482e= 470 vnode interlock (vnode interlock) @ /usr/home/sandbox/debug2/src/sys/fs= /devfs/devfs_vnops.c:288=0A 2nd 0xffffff000482e448 devfs (devfs) @ /usr/hom= e/sandbox/debug2/src/sys/kern/vfs_subr.c:2044=0AKDB: stack backtrace:=0Adb_= trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitness_checkorder() a= t witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmgr_args+0x527=0Avop= _stdlock() at vop_stdlock+0x39=0AVOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b=0A_v= n_lock() at _vn_lock+0x50=0Avget() at vget+0x70=0Adevfs_allocv() at devfs_a= llocv+0xf9=0Adevfs_root() at devfs_root+0x49=0Aset_rootvnode() at set_rootv= node+0x2d=0Avfs_mountroot() at vfs_mountroot+0x2f8=0Astart_init() at start_= init+0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fork_tram= poline+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp =3D 0 -= --=0ATrying to mount root from zfs:pool=0Act_to_ts([2008-06-21 11:45:42]) = =3D 1214048742.000000000=0Astart_init: trying /sbin/init=0AWARNING: Expecte= d rawoffset 0, found 63=0Alock order reversal: (sleepable after non-sleepab= le)=0A 1st 0xffffffffc15a2b90 bufwait (bufwait) @ /usr/home/sandbox/debug2/= src/sys/kern/vfs_bio.c:1796=0A 2nd 0xffffff0004f9aa50 bufobj interlock (buf= obj interlock) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_bio.c:2442=0A 3r= d 0xffffffffc15a2938 bufwait (bufwait) @ /usr/home/sandbox/debug2/src/sys/k= ern/vfs_bio.c:2456=0AKDB: stack backtrace:=0Adb_trace_self_wrapper() at db_= trace_self_wrapper+0x2a=0Awitness_checkorder() at witness_checkorder+0x5f3= =0A__lockmgr_args() at __lockmgr_args+0x527=0Agetblk() at getblk+0xda=0Affs= _sbupdate() at ffs_sbupdate+0xee=0Affs_mount() at ffs_mount+0x1bf1=0Avfs_do= nmount() at vfs_donmount+0xf6b=0Anmount() at nmount+0xa8=0Asyscall() at sys= call+0x1dd=0AXfast_syscall() at Xfast_syscall+0xab=0A--- syscall (378, Free= BSD ELF64, nmount), rip =3D 0x8007945ec, rsp =3D 0x7fffffffda98, rbp =3D 0x= 7fffffffe868 ---=0ALinux ELF exec handler installed=0Asplash: image decoder= found: daemon_saver=0Arum0: on uhub1=0Arum0: MAC/BBP RT2573 (rev 0x2573a), = RF RT2528=0Arum0: WARNING: using obsoleted IFF_NEEDSGIANT flag=0Arum0: bpf = attached=0Arum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps=0Arum0: 11g rates: 1= Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54= Mbps=0Awlan0: bpf attached=0Awlan0: Ethernet address: 00:17:3f:72:40:90=0Aw= lan0: bpf attached=0Arum0: need multicast update callback=0Arum0: need mult= icast update callback=0A=0A=0AFatal trap 12: page fault while in kernel mod= e=0Acpuid =3D 1; apic id =3D 01=0Afault virtual address =3D 0x40=0Afault co= de =3D supervisor read data, page not present=0Ainstruction pointer =3D 0x= 8:0xffffffff803e082e=0Astack pointer =3D 0x10:0xffffffffd75bfb50=0A= frame pointer =3D 0x10:0xffffffffd75bfb80=0Acode segment =3D base = 0x0, limit 0xfffff, type 0x1b=0A =3D DPL 0, pres 1, long 1, def32 0, gran= 1=0Aprocessor eflags =3D interrupt enabled, resume, IOPL =3D 0=0Acurrent p= rocess =3D 12 (irq22: ehci0)=0APhysical memory: 4076 MB=0ADumping 403 MB: = 388 372 356 340 324 308 292 276 260 244 228 212 196 180 164 148 132 116 100= 84 68 52 36 20 4=0A ------=_NextPart_000_0004_01C8D4BC.19596BD0 Content-Type: text/plain; name="dmesg_8.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_8.txt" Copyright (c) 1992-2008 The FreeBSD Project.=0ACopyright (c) 1979, 1980, 19= 83, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A The Regents of the Universi= ty of California. All rights reserved.=0AFreeBSD is a registered trademark = of The FreeBSD Foundation.=0AFreeBSD 8.0-CURRENT #2: Sat Jun 21 11:20:35 BS= T 2008=0A root@w2fzz0vc03.aah-go-on.com:/usr/obj/usr/home/sandbox/debug2= /src/sys/GENERIC_DTRACE=0AWARNING: WITNESS option enabled, expect reduced p= erformance.=0ATimecounter "i8254" frequency 1193182 Hz quality 0=0ACPU: Int= el(R) Core(TM)2 Quad CPU @ 2.66GHz (3192.05-MHz K8-class CPU)=0A = Origin =3D "GenuineIntel" Id =3D 0x6f7 Stepping =3D 7=0A Features=3D0xb= febfbff=0A Features2=3D0xe3= bd=0A AMD Feature= s=3D0x20100800=0A AMD Features2=3D0x1=0A Cores per p= ackage: 4=0Ausable memory =3D 4274376704 (4076 MB)=0Aavail memory =3D 4099= 776512 (3909 MB)=0AACPI APIC Table: =0AFreeBSD/SMP: Multipr= ocessor System Detected: 4 CPUs=0A cpu0 (BSP): APIC ID: 0=0A cpu1 (AP): AP= IC ID: 1=0A cpu2 (AP): APIC ID: 2=0A cpu3 (AP): APIC ID: 3=0AThis module= (opensolaris) contains code covered by the=0ACommon Development and Distri= bution License (CDDL)=0Asee http://opensolaris.org/os/licensing/opensolaris= _license/=0Aioapic0: Changing APIC ID to 8=0Aioapic0 irqs 0-2= 3 on motherboard=0Alapic0: Forcing LINT1 to edge trigger=0Akbd1 at kbdmux0= =0Aath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF541= 3)=0Aacpi0: on motherboard=0Aacpi0: [ITHREAD]=0Aacpi0: Power= Button (fixed)=0Aacpi0: reservation of 0, a0000 (3) failed=0Aacpi0: reserv= ation of 100000, f00000 (3) failed=0Aacpi0: reservation of 1000000, 9edbcc0= 0 (3) failed=0ATimecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0A= acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0=0Apc= ib0: port 0xcf8-0xcff on acpi0=0Apci0: on pcib0=0Apci0: at device 0.1 (no driver attached)=0Apci0:= at device 0.2 (no driver attached)=0Apci0: at = device 0.3 (no driver attached)=0Apci0: at device 0.4 (no dri= ver attached)=0Apci0: at device 1.0 (no driver attached)=0Apc= i0: at device 1.1 (no driver attached)=0Apci0: = at device 1.2 (no driver attached)=0Apci0: at device 1.3 (no = driver attached)=0Apci0: at device 1.4 (no driver attached)= =0Apci0: at device 1.5 (no driver attached)=0Apci0: at device 1.6 (no driver attached)=0Apcib1: at d= evice 2.0 on pci0=0Apci1: on pcib1=0Avgapci0: port 0xdc80-0xdcff mem 0xde000000-0xdeffffff,0xa0000000-0xafffff= ff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci1=0Apcib2: at device 4.0 on pci0=0Apci2: on pcib2=0Apcib3: at device 5.0 on pci0=0Apci3: on pcib3= =0Apci0: at device 9.0 (no driver attached)=0Aisab0: port 0x4f00-0x4fff at device 10.0 on pci0=0Aisa0: on isa= b0=0Apci0: at device 10.1 (no driver attached)=0Aohci0:= mem 0xdfffc000-0xdfffcfff irq 21 at device= 11.0 on pci0=0Aohci0: [GIANT-LOCKED]=0Aohci0: [ITHREAD]=0Ausb0: OHCI versi= on 1.0, legacy support=0Ausb0: SMM does not respond, resetting=0Ausb0: on ohci0=0Ausb0: USB revision 1.0=0Auhub0: on usb0=0Auhub0: 10 po= rts with 10 removable, self powered=0Aehci0: mem 0xdfffbf00-0xdfffbfff irq 22 at device 11.1 on pci0=0Aehci0: [GIA= NT-LOCKED]=0Aehci0: [ITHREAD]=0Ausb1: waiting for BIOS to give up control= =0Ausb1: EHCI version 1.0=0Ausb1: companion controller, 10 ports each: usb0= =0Ausb1: on ehci0=0Ausb1: USB revision = 2.0=0Auhub1: on us= b1=0Auhub1: 10 ports with 10 removable, self powered=0Aumass0: on uhub1=0Augen0: on uhub1=0Arum0: on uhub1=0Arum0: = MAC/BBP RT2573 (rev 0x2573a), RF RT2528=0Arum0: WARNING: using obsoleted IF= F_NEEDSGIANT flag=0Aumass1: = on uhub1=0Aatapci0: port 0x1f0-0x= 1f7,0x3f6,0x170-0x177,0x376,0xecf0-0xecff at device 13.0 on pci0=0Aata0: on atapci0=0Aata0: [ITHREAD]=0Aata1: on atapc= i0=0Aata1: [ITHREAD]=0Aatapci1: po= rt 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf me= m 0xdfffd000-0xdfffdfff irq 23 at device 14.0 on pci0=0Aatapci1: [ITHREAD]= =0Aata2: on atapci1=0Aata2: [ITHREAD]=0Aata3: on atapci1=0Aata3: [ITHREAD]=0Aatapci2: port 0xfe40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed= 0-0xfedf mem 0xdfffe000-0xdfffefff irq 20 at device 14.1 on pci0=0Aatapci2:= [ITHREAD]=0Aata4: on atapci2=0Aata4: [ITHREAD]=0Aata5: on atapci2=0Aata5: [ITHREAD]=0Aatapci3: port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0x= feb3,0xfef0-0xfeff mem 0xdffff000-0xdfffffff irq 21 at device 14.2 on pci0= =0Aatapci3: [ITHREAD]=0Aata6: on atapci3=0Aata6: [ITHREAD]= =0Aata7: on atapci3=0Aata7: [ITHREAD]=0Apcib4: at device 15.0 on pci0=0Apci4: on pcib4=0Apci4: at device 4.0 (no driver attached)=0Apci4: at d= evice 5.0 (no driver attached)=0Afwohci0: m= em 0xdadfb800-0xdadfbfff,0xdadfc000-0xdadfffff irq 18 at device 10.0 on pci= 4=0Afwohci0: [FILTER]=0Afwohci0: OHCI version 1.10 (ROM=3D0)=0Afwohci0: No.= of Isochronous channels is 4.=0Afwohci0: EUI64 80:00:00:00:00:00:00:00=0Af= wohci0: Phy 1394a available S400, 2 ports.=0Afwohci0: Link S400, max_rec 20= 48 bytes.=0Afirewire0: on fwohci0=0Afwe0: on firewire0=0Aif_fwe0: Fake Ethernet address: 82:00:00:00= :00:00=0Afwe0: Ethernet address: 82:00:00:00:00:00=0Afwip0: on firewire0=0Afwip0: Firewire address: 80:00:00:00:00:00:00:00 @ 0xfff= e00000000, S400, maxrec 2048=0Asbp0: on firewire= 0=0Adcons_crom0: on firewire0=0Adcons_crom0: bus_= addr 0x228c000=0Afwohci0: Initiate bus reset=0Afwohci0: BUS reset=0Afwohci0= : node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode=0Apcib5: at device 19.0 on pci0=0Apci5: on pcib5=0Apcib6: at device 24.0 on pci0=0Apci6: on pcib6=0Av= gapci1: port 0xbc80-0xbcff mem 0xd1000000-0xd1ffff= ff,0xc0000000-0xcfffffff,0xd2000000-0xd3ffffff irq 16 at device 0.0 on pci6= =0Aacpi_hpet0: iomem 0xfed00000-0xfed003ff on = acpi0=0ATimecounter "HPET" frequency 25000000 Hz quality 900=0Acpu0: on acpi0=0Aest0: on cpu0=0Aest:= CPU supports Enhanced Speedstep, but is not recognized.=0Aest: cpu_vendor = GenuineIntel, msr c380c3886000c38=0Adevice_attach: est0 attach returned 6= =0Ap4tcc0: on cpu0=0Acpu1: on ac= pi0=0Aest1: on cpu1=0Aest: CPU suppo= rts Enhanced Speedstep, but is not recognized.=0Aest: cpu_vendor GenuineInt= el, msr c380c3886000c38=0Adevice_attach: est1 attach returned 6=0Ap4tcc1: <= CPU Frequency Thermal Control> on cpu1=0Acpu2: on acpi0=0Aest2: = on cpu2=0Aest: CPU supports Enhanced= Speedstep, but is not recognized.=0Aest: cpu_vendor GenuineIntel, msr c380= c3886000c38=0Adevice_attach: est2 attach returned 6=0Ap4tcc2: on cpu2=0Acpu3: on acpi0=0Aest3: on cpu3=0Aest: CPU supports Enhanced Speedstep, = but is not recognized.=0Aest: cpu_vendor GenuineIntel, msr c380c3886000c38= =0Adevice_attach: est3 attach returned 6=0Ap4tcc3: on cpu3=0Aacpi_button0: on acpi0=0Aatrtc0: port 0x70-0x7f irq 8 on acpi0=0Aatkbdc0: port 0x60,0x64 irq 1 on acpi0=0Aatkbd0: irq 1 on atkbd= c0=0Akbd0 at atkbd0=0Aatkbd0: [GIANT-LOCKED]=0Aatkbd0: [ITHREAD]=0Apsm0: irq 12 on atkbdc0=0Apsm0: [GIANT-LOCKED]=0Apsm0: [ITHREAD]=0Apsm= 0: model MouseMan+, device ID 0=0Asio0: <16550A-compatible COM port> port 0= x3f8-0x3ff irq 4 flags 0x10 on acpi0=0Asio0: type 16550A=0Asio0: [FILTER]= =0Aorm0: at iomem 0xc0000-0xcc7ff,0xcc800-0xce7ff,0xce800= -0xcffff on isa0=0Appc0: cannot reserve I/O port range=0Asc0: at flags 0x100 on isa0=0Asc0: VGA <16 virtual consoles, flags=3D0x300>= =0Asio1: configured irq 3 not in bitmap of probed irqs 0=0Asio1: port may n= ot be enabled=0Avga0: at port 0x3c0-0x3df iomem 0xa0000-0= xbffff on isa0=0AWARNING: ZFS is considered to be an experimental feature i= n FreeBSD.=0ATimecounters tick every 1.000 msec=0Afirewire0: 1 nodes, maxho= p <=3D 0, cable IRM =3D 0 (me)=0Afirewire0: bus manager 0 (me)=0AZFS filesy= stem version 6=0AZFS storage pool version 6=0Aad4: 305245MB at ata2-master SATA300=0Aad6: 305245MB at ata3-master SATA300=0Aacd0: CDRW at ata4-master SATA150=0Aacd1: DVDR at ata5-master SATA150=0AGEOM_LABEL: Label for provider ad4s2= is ntfs/System.=0Aad12: 305245MB at ata= 6-master SATA300=0Aad14: 305245MB at ata= 7-master SATA300=0AGEOM_MIRROR: Device mirror/root launched (4/4).=0AWARNIN= G: Expected rawoffset 0, found 63=0Alapic1: Forcing LINT1 to edge trigger= =0ASMP: AP CPU #1 Launched!=0Alapic3: Forcing LINT1 to edge trigger=0ASMP: = AP CPU #3 Launched!=0Alapic2: Forcing LINT1 to edge trigger=0ASMP: AP CPU #= 2 Launched!=0AWARNING: WITNESS option enabled, expect reduced performance.= =0Ada0 at umass-sim0 bus 0 target 0 lun 0=0Ada0: Fixed Direct Access SCSI-4 device=20=0Ada0: 40.000MB/s transfers=0Ada= 0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)=0Ada1 at umass-= sim1 bus 1 target 0 lun 0=0Ada1: Removable Dir= ect Access SCSI-0 device=20=0Ada1: 40.000MB/s transfers=0Ada1: Attempt to q= uery device size failed: NOT READY, Medium not present=0Ada2 at umass-sim1 = bus 1 target 0 lun 1=0Ada2: Removable Direct Acc= ess SCSI-0 device=20=0Ada2: 40.000MB/s transfers=0Ada2: Attempt to query de= vice size failed: NOT READY, Medium not present=0Ada3 at umass-sim1 bus 1 t= arget 0 lun 2=0Ada3: Removable Direct Access S= CSI-0 device=20=0Ada3: 40.000MB/s transfers=0Ada3: Attempt to query device = size failed: NOT READY, Medium not present=0Ada4 at umass-sim1 bus 1 target= 0 lun 3=0Ada4: Removable Direct Access SCSI-0= device=20=0Ada4: 40.000MB/s transfers=0Ada4: Attempt to query device size = failed: NOT READY, Medium not present=0AGEOM_LABEL: Label for provider da0s= 1 is ntfs/Backup.=0Alock order reversal: (sleepable after non-sleepable)=0A= 1st 0xffffff000482a028 struct mount mtx (struct mount mtx) @ /usr/home/san= dbox/debug2/src/sys/kern/vfs_subr.c:343=0A 2nd 0xffffff000482a000 vfslock (= vfslock) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_subr.c:370=0AKDB: stac= k backtrace:=0Adb_trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitn= ess_checkorder() at witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmg= r_args+0xc5e=0Avfs_busy() at vfs_busy+0xd0=0Avfs_mount_alloc() at vfs_mount= _alloc+0x80=0Avfs_mountroot() at vfs_mountroot+0x23b=0Astart_init() at star= t_init+0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fork_tr= ampoline+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp =3D 0= ---=0Alock order reversal: (sleepable after non-sleepable)=0A 1st 0xffffff= 0004831470 vnode interlock (vnode interlock) @ /usr/home/sandbox/debug2/src= /sys/fs/devfs/devfs_vnops.c:288=0A 2nd 0xffffff0004831448 devfs (devfs) @ /= usr/home/sandbox/debug2/src/sys/kern/vfs_subr.c:2044=0AKDB: stack backtrace= :=0Adb_trace_self_wrapper() at db_trace_self_wrapper+0x2a=0Awitness_checkor= der() at witness_checkorder+0x5f3=0A__lockmgr_args() at __lockmgr_args+0x52= 7=0Avop_stdlock() at vop_stdlock+0x39=0AVOP_LOCK1_APV() at VOP_LOCK1_APV+0x= 9b=0A_vn_lock() at _vn_lock+0x50=0Avget() at vget+0x70=0Adevfs_allocv() at = devfs_allocv+0xf9=0Adevfs_root() at devfs_root+0x49=0Aset_rootvnode() at se= t_rootvnode+0x2d=0Avfs_mountroot() at vfs_mountroot+0x2f8=0Astart_init() at= start_init+0x62=0Afork_exit() at fork_exit+0x12a=0Afork_trampoline() at fo= rk_trampoline+0xe=0A--- trap 0, rip =3D 0, rsp =3D 0xffffffff81246d30, rbp = =3D 0 ---=0ATrying to mount root from zfs:pool=0AWARNING: Expected rawoffse= t 0, found 63=0Alock order reversal: (sleepable after non-sleepable)=0A 1st= 0xffffffffc15a2b90 bufwait (bufwait) @ /usr/home/sandbox/debug2/src/sys/ke= rn/vfs_bio.c:1796=0A 2nd 0xffffff0004fba6a0 bufobj interlock (bufobj interl= ock) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_bio.c:2442=0A 3rd 0xffffff= ffc15a2938 bufwait (bufwait) @ /usr/home/sandbox/debug2/src/sys/kern/vfs_bi= o.c:2456=0AKDB: stack backtrace:=0Adb_trace_self_wrapper() at db_trace_self= _wrapper+0x2a=0Awitness_checkorder() at witness_checkorder+0x5f3=0A__lockmg= r_args() at __lockmgr_args+0x527=0Agetblk() at getblk+0xda=0Affs_sbupdate()= at ffs_sbupdate+0xee=0Affs_mount() at ffs_mount+0x1bf1=0Avfs_donmount() at= vfs_donmount+0xf6b=0Anmount() at nmount+0xa8=0Asyscall() at syscall+0x1dd= =0AXfast_syscall() at Xfast_syscall+0xab=0A--- syscall (378, FreeBSD ELF64,= nmount), rip =3D 0x8007945ec, rsp =3D 0x7fffffffda98, rbp =3D 0x7fffffffe8= 68 ---=0Awlan0: Ethernet address: 00:17:3f:72:40:90=0Arum0: need multicast = update callback=0Arum0: could not transmit buffer: SHORT_XFER=0A=0A=0AFatal= trap 12: page fault while in kernel mode=0Acpuid =3D 1; apic id =3D 01=0Af= ault virtual address =3D 0x8=0Afault code =3D supervisor read data, page n= ot present=0Ainstruction pointer =3D 0x8:0xffffffff803e0712=0Astack pointer= =3D 0x10:0xffffffffd75bfb50=0Aframe pointer =3D 0x10:0xfff= fffffd75bfb80=0Acode segment =3D base 0x0, limit 0xfffff, type 0x1b=0A = =3D DPL 0, pres 1, long 1, def32 0, gran 1=0Aprocessor eflags =3D interrupt= enabled, resume, IOPL =3D 0=0Acurrent process =3D 12 (irq22: ehci0)=0APhy= sical memory: 4076 MB=0ADumping 317 MB: 302 286 270 254 238 222 206 190 174= 158 142 126 110 94 78 62 46 30 14=0A ------=_NextPart_000_0004_01C8D4BC.19596BD0 Content-Type: application/octet-stream; name="GENERIC_DTRACE" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="GENERIC_DTRACE" #=0A# GENERIC -- Generic kernel configuration file for FreeBSD/amd64=0A#=0A= # For more information on this file, please read the handbook section on=0A= # Kernel Configuration Files:=0A#=0A# http://www.FreeBSD.org/doc/en_US.I= SO8859-1/books/handbook/kernelconfig-config.html=0A#=0A# The handbook is al= so available locally in /usr/share/doc/handbook=0A# if you've installed the= doc distribution, otherwise always see the=0A# FreeBSD World Wide Web serv= er (http://www.FreeBSD.org/) for the=0A# latest information.=0A#=0A# An exh= austive list of options and more detailed explanations of the=0A# device li= nes is also present in the ../../conf/NOTES and NOTES files.=0A# If you are= in doubt as to the purpose or necessity of a line, check first=0A# in NOTE= S.=0A#=0A# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.501 2008/05/27 02:22:32= yongari Exp $=0A=0Acpu HAMMER=0Aident GENERIC=0A=0A# To statically compi= le in device wiring instead of /boot/device.hints=0A#hints "GENERIC.hints"= # Default places to look for devices.=0A=0Amakeoptions DEBUG=3D-g # Buil= d kernel with gdb(1) debug symbols=0A=0Aoptions SCHED_ULE # ULE scheduler= =0Aoptions PREEMPTION # Enable kernel thread preemption=0Aoptions INET = # InterNETworking=0Aoptions INET6 # IPv6 communications protocols=0Aopt= ions SCTP # Stream Control Transmission Protocol=0Aoptions FFS # Berk= eley Fast Filesystem=0Aoptions SOFTUPDATES # Enable FFS soft updates supp= ort=0Aoptions UFS_ACL # Support for access control lists=0Aoptions UFS_= DIRHASH # Improve performance on big directories=0Aoptions UFS_GJOURNAL = # Enable gjournal-based UFS journaling=0Aoptions MD_ROOT # MD is a poten= tial root device=0Aoptions NFSCLIENT # Network Filesystem Client=0Aoption= s NFSSERVER # Network Filesystem Server=0Aoptions NFSLOCKD # Network Lo= ck Manager=0Aoptions NFS_ROOT # NFS usable as /, requires NFSCLIENT=0Aopt= ions NTFS # NT File System=0Aoptions MSDOSFS # MSDOS Filesystem=0Aopt= ions CD9660 # ISO 9660 Filesystem=0Aoptions PROCFS # Process filesyst= em (requires PSEUDOFS)=0Aoptions PSEUDOFS # Pseudo-filesystem framework= =0Aoptions GEOM_PART_GPT # GUID Partition Tables.=0Aoptions GEOM_LABEL = # Provides labelization=0Aoptions COMPAT_43TTY # BSD 4.3 TTY compat [KEEP= THIS!]=0Aoptions COMPAT_IA32 # Compatible with i386 binaries=0Aoptions = COMPAT_FREEBSD4 # Compatible with FreeBSD4=0Aoptions COMPAT_FREEBSD5 # C= ompatible with FreeBSD5=0Aoptions COMPAT_FREEBSD6 # Compatible with FreeB= SD6=0Aoptions COMPAT_FREEBSD7 # Compatible with FreeBSD7=0Aoptions SCSI_= DELAY=3D5000 # Delay (in ms) before probing SCSI=0Aoptions KTRACE # ktr= ace(1) support=0Aoptions STACK # stack(9) support=0Aoptions SYSVSHM #= SYSV-style shared memory=0Aoptions SYSVMSG # SYSV-style message queues= =0Aoptions SYSVSEM # SYSV-style semaphores=0Aoptions _KPOSIX_PRIORITY_S= CHEDULING # POSIX P1003_1B real-time extensions=0Aoptions KBD_INSTALL_CDEV= # install a CDEV entry in /dev=0Aoptions STOP_NMI # Stop CPUS using NMI = instead of IPI=0Aoptions AUDIT # Security event auditing=0A=0A# Debuggin= g for use in -current=0Aoptions KDB # Enable kernel debugger support.=0A= options DDB # Support DDB.=0Aoptions GDB # Support remote GDB.=0Aopti= ons INVARIANTS # Enable calls of extra sanity checking=0Aoptions INVARIA= NT_SUPPORT # Extra sanity checks of internal structures, required by INVARI= ANTS=0Aoptions WITNESS # Enable checks to detect deadlocks and cycles=0A= options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed=0A=0Ao= ptions KDTRACE_HOOKS=0Aoptions DDB_CTF=0A=0A# Make an SMP-capable kernel = by default=0Aoptions SMP # Symmetric MultiProcessor Kernel=0A=0A# CPU fr= equency control=0Adevice cpufreq=0A=0A# Bus support.=0Adevice acpi=0Adevi= ce pci=0A=0A# Floppy drives=0Adevice fdc=0A=0A# ATA and ATAPI devices=0Ad= evice ata=0Adevice atadisk # ATA disk drives=0Adevice ataraid # ATA RA= ID drives=0Adevice atapicd # ATAPI CDROM drives=0Adevice atapifd # ATAP= I floppy drives=0Adevice atapist # ATAPI tape drives=0Aoptions ATA_STATI= C_ID # Static device numbering=0A=0A# SCSI Controllers=0Adevice ahc # AHA= 2940 and onboard AIC7xxx devices=0Aoptions AHC_REG_PRETTY_PRINT # Print re= gister bitfields in debug=0A # output. Adds ~128k to driver.=0Adevice = ahd # AHA39320/29320 and onboard AIC79xx devices=0Aoptions AHD_REG_PRETT= Y_PRINT # Print register bitfields in debug=0A # output. Adds ~215k to= driver.=0Adevice amd # AMD 53C974 (Tekram DC-390(T))=0Adevice hptiop #= Highpoint RocketRaid 3xxx series=0Adevice isp # Qlogic family=0A#device = ispfw # Firmware for QLogic HBAs- normally a module=0Adevice mpt # LSI-= Logic MPT-Fusion=0A#device ncr # NCR/Symbios Logic=0Adevice sym # NCR/S= ymbios Logic (newer chipsets + those of `ncr')=0Adevice trm # Tekram DC39= 5U/UW/F DC315U adapters=0A=0Adevice adv # Advansys SCSI adapters=0Adevice= adw # Advansys wide SCSI adapters=0Adevice aic # Adaptec 15[012]x SCSI= adapters, AIC-6[23]60.=0Adevice bt # Buslogic/Mylex MultiMaster SCSI ada= pters=0A=0A# SCSI peripherals=0Adevice scbus # SCSI bus (required for SCS= I)=0Adevice ch # SCSI media changers=0Adevice da # Direct Access (disks= )=0Adevice sa # Sequential Access (tape etc)=0Adevice cd # CD=0Adevice = pass # Passthrough device (direct SCSI access)=0Adevice ses # SCSI Envi= ronmental Services (and SAF-TE)=0A=0A# RAID controllers interfaced to the S= CSI subsystem=0Adevice amr # AMI MegaRAID=0Adevice arcmsr # Areca SATA = II RAID=0Adevice ciss # Compaq Smart RAID 5*=0Adevice dpt # DPT Smartca= che III, IV - See NOTES for options=0Adevice hptmv # Highpoint RocketRAID= 182x=0Adevice hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx=0Adevi= ce iir # Intel Integrated RAID=0Adevice ips # IBM (Adaptec) ServeRAID= =0Adevice mly # Mylex AcceleRAID/eXtremeRAID=0Adevice twa # 3ware 9000 = series PATA/SATA RAID=0A=0A# RAID controllers=0Adevice aac # Adaptec FSA = RAID=0Adevice aacp # SCSI passthrough for aac (requires CAM)=0Adevice id= a # Compaq Smart RAID=0Adevice mfi # LSI MegaRAID SAS=0Adevice mlx # M= ylex DAC960 family=0A#XXX pointer/int warnings=0A#device pst # Promise Su= pertrak SX6000=0Adevice twe # 3ware ATA RAID=0A=0A# atkbdc0 controls both= the keyboard and the PS/2 mouse=0Adevice atkbdc # AT keyboard controller= =0Adevice atkbd # AT keyboard=0Adevice psm # PS/2 mouse=0A=0Adevice kb= dmux # keyboard multiplexer=0A=0Adevice vga # VGA video card driver=0A= =0Adevice splash # Splash screen and screen saver support=0A=0A# syscons = is the default console driver, resembling an SCO console=0Adevice sc=0A=0A= device agp # support several AGP chipsets=0A=0A# PCCARD (PCMCIA) support= =0A# PCMCIA and cardbus bridge support=0Adevice cbb # cardbus (yenta) bri= dge=0Adevice pccard # PC Card (16-bit) bus=0Adevice cardbus # CardBus (= 32-bit) bus=0A=0A# Serial (COM) ports=0Adevice sio # 8250, 16[45]50 based= serial ports=0Adevice uart # Generic UART driver=0A=0A# Parallel port=0A= device ppc=0Adevice ppbus # Parallel port bus (required)=0Adevice lpt = # Printer=0Adevice plip # TCP/IP over parallel=0Adevice ppi # Parallel = port interface device=0A#device vpo # Requires scbus and da=0A=0A# If you= 've got a "dumb" serial or parallel PCI card that is=0A# supported by the p= uc(4) glue driver, uncomment the following=0A# line to enable it (connects = to sio, uart and/or ppc drivers):=0A#device puc=0A=0A# PCI Ethernet NICs.= =0Adevice de # DEC/Intel DC21x4x (``Tulip'')=0Adevice em # Intel PRO/10= 00 adapter Gigabit Ethernet Card=0Adevice ixgb # Intel PRO/10GbE Ethernet= Card=0Adevice le # AMD Am7900 LANCE and Am79C9xx PCnet=0Adevice ti # A= lteon Networks Tigon I/II gigabit Ethernet=0Adevice txp # 3Com 3cR990 (``= Typhoon'')=0Adevice vx # 3Com 3c590, 3c595 (``Vortex'')=0A=0A# PCI Ethern= et NICs that use the common MII bus controller code.=0A# NOTE: Be sure to k= eep the 'device miibus' line in order to use these NICs!=0Adevice miibus = # MII bus support=0Adevice age # Attansic/Atheros L1 Gigabit Ethernet=0Ad= evice bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet=0Adevice bfe # Br= oadcom BCM440x 10/100 Ethernet=0Adevice bge # Broadcom BCM570xx Gigabit E= thernet=0Adevice dc # DEC/Intel 21143 and various workalikes=0Adevice fx= p # Intel EtherExpress PRO/100B (82557, 82558)=0Adevice jme # JMicron JM= C250 Gigabit/JMC260 Fast Ethernet=0Adevice lge # Level 1 LXT1001 gigabit = Ethernet=0Adevice msk # Marvell/SysKonnect Yukon II Gigabit Ethernet=0Ade= vice nfe # nVidia nForce MCP on-board Ethernet=0Adevice nge # NatSemi D= P83820 gigabit Ethernet=0A#device nve # nVidia nForce MCP on-board Ethern= et Networking=0Adevice pcn # AMD Am79C97x PCI 10/100 (precedence over 'le= ')=0Adevice re # RealTek 8139C+/8169/8169S/8110S=0Adevice rl # RealTek = 8129/8139=0Adevice sf # Adaptec AIC-6915 (``Starfire'')=0Adevice sis # = Silicon Integrated Systems SiS 900/SiS 7016=0Adevice sk # SysKonnect SK-9= 84x & SK-982x gigabit Ethernet=0Adevice ste # Sundance ST201 (D-Link DFE-= 550TX)=0Adevice tl # Texas Instruments ThunderLAN=0Adevice tx # SMC Eth= erPower II (83c170 ``EPIC'')=0Adevice vge # VIA VT612x gigabit Ethernet= =0Adevice vr # VIA Rhine, Rhine II=0Adevice wb # Winbond W89C840F=0Adev= ice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A=0A# ISA Ethernet NICs= pccard NICs included.=0Adevice cs # Crystal Semiconductor CS89x0 NIC= =0A# 'device ed' requires 'device miibus'=0Adevice ed # NE[12]000, SMC Ul= tra, 3c503, DS8390 cards=0Adevice ex # Intel EtherExpress Pro/10 and Pro/= 10+=0Adevice ep # Etherlink III based cards=0Adevice fe # Fujitsu MB869= 6x based cards=0Adevice sn # SMC's 9000 series of Ethernet chips=0Adevice= xe # Xircom pccard Ethernet=0A=0A# Wireless NIC cards=0Adevice wlan # = 802.11 support=0Aoptions IEEE80211_DEBUG # enable debug msgs=0Aoptions IE= EE80211_AMPDU_AGE # age frames in AMPDU reorder q's=0Adevice wlan_wep # 80= 2.11 WEP support=0Adevice wlan_ccmp # 802.11 CCMP support=0Adevice wlan_t= kip # 802.11 TKIP support=0Adevice wlan_amrr # AMRR transmit rate control = algorithm=0Adevice an # Aironet 4500/4800 802.11 wireless NICs.=0Adevice = ath # Atheros pci/cardbus NIC's=0Adevice ath_hal # Atheros HAL (Hardwar= e Access Layer)=0Adevice ath_rate_sample # SampleRate tx rate control for = ath=0Adevice ral # Ralink Technology RT2500 wireless NICs.=0Adevice wi = # WaveLAN/Intersil/Symbol 802.11 wireless NICs.=0A=0A# Pseudo devices.=0Ade= vice loop # Network loopback=0Adevice random # Entropy device=0Adevice = ether # Ethernet support=0Adevice sl # Kernel SLIP=0Adevice ppp # Ker= nel PPP=0Adevice tun # Packet tunnel.=0Adevice pty # Pseudo-ttys (telne= t etc)=0Adevice md # Memory "disks"=0Adevice gif # IPv6 and IPv4 tunnel= ing=0Adevice faith # IPv6-to-IPv4 relaying (translation)=0Adevice firmwa= re # firmware assist module=0A=0A# The `bpf' device enables the Berkeley Pa= cket Filter.=0A# Be aware of the administrative consequences of enabling th= is!=0A# Note that 'bpf' is required for DHCP.=0Adevice bpf # Berkeley pac= ket filter=0A=0A# USB support=0Adevice uhci # UHCI PCI->USB interface=0Ad= evice ohci # OHCI PCI->USB interface=0Adevice ehci # EHCI PCI->USB inte= rface (USB 2.0)=0Adevice usb # USB Bus (required)=0A#device udbp # USB = Double Bulk Pipe devices=0Adevice ugen # Generic=0Adevice uhid # "Human= Interface Devices"=0Adevice ukbd # Keyboard=0Adevice ulpt # Printer=0A= device umass # Disks/Mass storage - Requires scbus and da=0Adevice ums = # Mouse=0Adevice ural # Ralink Technology RT2500USB wireless NICs=0Adevic= e rum # Ralink Technology RT2501USB wireless NICs=0Adevice urio # Diamo= nd Rio 500 MP3 player=0Adevice uscanner # Scanners=0A# USB Serial devices= =0Adevice ucom # Generic com ttys=0Adevice uark # Technologies ARK3116 = based serial adapters=0Adevice ubsa # Belkin F5U103 and compatible serial= adapters=0Adevice ubser # BWCT console serial adapters=0Adevice uftdi = # For FTDI usb serial adapters=0Adevice uipaq # Some WinCE based devices= =0Adevice uplcom # Prolific PL-2303 serial adapters=0Adevice uslcom # S= I Labs CP2101/CP2102 serial adapters=0Adevice uvisor # Visor and Palm dev= ices=0Adevice uvscom # USB serial support for DDI pocket's PHS=0A# USB Et= hernet, requires miibus=0Adevice aue # ADMtek USB Ethernet=0Adevice axe = # ASIX Electronics USB Ethernet=0Adevice cdce # Generic USB over Etherne= t=0Adevice cue # CATC USB Ethernet=0Adevice kue # Kawasaki LSI USB Ethe= rnet=0Adevice rue # RealTek RTL8150 USB Ethernet=0Adevice udav # Davico= m DM9601E USB=0A=0A# FireWire support=0Adevice firewire # FireWire bus cod= e=0Adevice sbp # SCSI over FireWire (Requires scbus and da)=0Adevice fwe= # Ethernet over FireWire (non-standard!)=0Adevice fwip # IP over FireWi= re (RFC 2734,3146)=0Adevice dcons # Dumb console driver=0Adevice dcons_c= rom # Configuration ROM for dcons=0A ------=_NextPart_000_0004_01C8D4BC.19596BD0 Content-Type: text/plain; name="uname.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="uname.txt" FreeBSD w2fzz0vc03.aah-go-on.com 8.0-CURRENT FreeBSD 8.0-CURRENT #2: Sat Ju= n 21 11:20:35 BST 2008 root@w2fzz0vc03.aah-go-on.com:/usr/obj/usr/home/= sandbox/debug2/src/sys/GENERIC_DTRACE amd64=0A ------=_NextPart_000_0004_01C8D4BC.19596BD0 Content-Type: application/octet-stream; name="usbdevs-v-no-rum" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="usbdevs-v-no-rum" Controller /dev/usb0:=0Aaddr 1: full speed, self powered, config 1, OHCI ro= ot hub(0x0000), nVidia(0x0000), rev 1.00=0A port 1 powered=0A port 2 powere= d=0A port 3 powered=0A port 4 powered=0A port 5 powered=0A port 6 powered= =0A port 7 powered=0A port 8 addr 2: full speed, power 90 mA, config 1, LEX= R PLUG DRIVE(0x0080), LEXR PLUG DRIVE(0x05dc), rev 0.01=0A port 9 powered= =0A port 10 powered=0AController /dev/usb1:=0Aaddr 1: high speed, self powe= red, config 1, EHCI root hub(0x0000), nVidia(0x0000), rev 1.00=0A port 1 po= wered=0A port 2 addr 2: high speed, self powered, config 1, FreeAgentDeskto= p(0x3000), Seagate(0x0bc2), rev 0.00=0A port 3 powered=0A port 4 powered=0A= port 5 powered=0A port 6 powered=0A port 7 addr 3: high speed, power 500 m= A, config 1, v1021(0x8051), MARVELL(0x1799), rev 0.01=0A port 8 powered=0A = port 9 powered=0A port 10 addr 4: high speed, power 500 mA, config 1, CA-20= 0(0x0200), TEAC(0x0644), rev 4.00=0A ------=_NextPart_000_0004_01C8D4BC.19596BD0--