Date: Sat, 14 Apr 2001 12:24:56 -0600 From: "Andrei Cojocaru" <acojocaru@hotmail.com> To: freebsd-questions@freebsd.org Subject: Linking Kernel Fails Message-ID: <F192ai4omRXf2LTrpwA00008fcf@hotmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_4d1_195a_13c8 Content-Type: text/plain; format=flowed The Kernel Linking Fails getting the following errors, the config file has been attached, I have followed the exact procedures. I am trying to compile a FreeBSD 4.2-STABLE kernel. linking kernel scsi_low.o: In function `scsi_low_cam_rescan_callback': scsi_low.o(.text+0x517): undefined reference to `xpt_free_path' scsi_low.o: In function `scsi_low_rescan_bus': scsi_low.o(.text+0x563): undefined reference to `xpt_periph' scsi_low.o(.text+0x56c): undefined reference to `xpt_create_path' scsi_low.o(.text+0x57f): undefined reference to `xpt_setup_ccb' scsi_low.o(.text+0x59a): undefined reference to `xpt_action' scsi_low.o: In function `scsi_low_attach': scsi_low.o(.text+0x692): undefined reference to `cam_simq_alloc' scsi_low.o(.text+0x6ca): undefined reference to `cam_sim_alloc' scsi_low.o(.text+0x6da): undefined reference to `cam_simq_free' scsi_low.o(.text+0x6ea): undefined reference to `xpt_bus_register' scsi_low.o(.text+0x715): undefined reference to `xpt_create_path' scsi_low.o(.text+0x728): undefined reference to `xpt_bus_deregister' scsi_low.o(.text+0x732): undefined reference to `cam_sim_free' scsi_low.o: In function `scsi_low_dettach': scsi_low.o(.text+0x79f): undefined reference to `xpt_async' scsi_low.o(.text+0x7a7): undefined reference to `xpt_free_path' scsi_low.o(.text+0x7b5): undefined reference to `xpt_bus_deregister' scsi_low.o(.text+0x7bf): undefined reference to `cam_sim_free' scsi_low.o: In function `scsi_low_scsi_action': scsi_low.o(.text+0xac9): undefined reference to `xpt_done' scsi_low.o(.text+0xae6): undefined reference to `xpt_done' scsi_low.o: In function `scsi_low_done': scsi_low.o(.text+0xf7e): undefined reference to `xpt_done' advansys.o: In function `adv_action': advansys.o(.text+0x258): undefined reference to `xpt_freeze_simq' advansys.o(.text+0x542): undefined reference to `xpt_done' advansys.o(.text+0x584): undefined reference to `xpt_done' advansys.o(.text+0x62b): undefined reference to `xpt_done' advansys.o(.text+0x640): undefined reference to `xpt_done' advansys.o: In function `adv_execute_ccb': advansys.o(.text+0x65f): undefined reference to `xpt_path_sim' advansys.o(.text+0x7ff): undefined reference to `xpt_freeze_simq' advansys.o(.text+0x862): undefined reference to `xpt_done' advansys.o: In function `adv_timeout': advansys.o(.text+0x958): undefined reference to `xpt_path_sim' advansys.o(.text+0x966): undefined reference to `xpt_print_path' advansys.o(.text+0x9b2): undefined reference to `xpt_freeze_simq' advansys.o(.text+0x9e4): undefined reference to `xpt_print_path' advansys.o(.text+0xa28): undefined reference to `xpt_print_path' advansys.o: In function `adv_done': advansys.o(.text+0x1210): undefined reference to `xpt_print_path' advansys.o(.text+0x1338): undefined reference to `xpt_print_path' advansys.o(.text+0x137f): undefined reference to `xpt_freeze_devq' advansys.o(.text+0x13c2): undefined reference to `xpt_done' advansys.o: In function `adv_attach': advansys.o(.text+0x1521): undefined reference to `cam_simq_alloc' advansys.o(.text+0x154e): undefined reference to `cam_sim_alloc' advansys.o(.text+0x156a): undefined reference to `xpt_bus_register' advansys.o(.text+0x1586): undefined reference to `xpt_create_path' advansys.o(.text+0x159c): undefined reference to `xpt_setup_ccb' advansys.o(.text+0x15ba): undefined reference to `xpt_action' advansys.o(.text+0x15cb): undefined reference to `xpt_bus_deregister' ... Thank you in advance for your help. _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. ------=_NextPart_000_4d1_195a_13c8 Content-Type: text/plain; name="turtle"; format=flowed Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="turtle" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 n_hibma Exp $ machine i386 #cpu I386_CPU cpu I486_CPU #cpu I586_CPU #cpu I686_CPU ident MYKERNEL maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa #device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device pcn # AMD Am79C79x PCI 10/100 NICs #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x260 irq 11 iomem 0xd8000 #device ed1 at isa? port 0x340 irq 4 iomem 0xe0000 #device ex #device ep #device fe0 at isa? port 0x300 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # Xircom Ethernet #device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet ------=_NextPart_000_4d1_195a_13c8-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F192ai4omRXf2LTrpwA00008fcf>