Date: Wed, 07 Apr 1999 00:30:50 +0300 From: =?koi8-r?Q?=E1=CE=C4=D2=C5=CA=20=F7=2E=20=EF=CC=C5=CA=CE=C9=CB?= <andyo@prime.net.ua> Cc: Rick Knebel <rknebel@uplink.net>, questions@FreeBSD.ORG Subject: Re: home network Message-ID: <370A7D08.9C3484B3@prime.net.ua> References: <6C37EE640B78D2118D2F00A0C90FCB441A5FFE@site2s1>
next in thread | previous in thread | raw e-mail | index | archive | help
Christopher Michaels wrote: > Why would you need routing information if they are on the same subnet? > (unless I'm missing something, which I probably am.) > > I think you need to provide some more information 1st. > > Can the FreeBSD machine ping it's own IP? > Can the MAC ping it's own IP? > > Can the FreeBSD and MAC ping each other? > > Does the ppp work on the BSD machine? Can you access the internet? > > Is the FreeBSD machine set as the Gateway on the MAC? > > Are you using ppp -alias? > > And may be main - do U run natd? (192.168.x.x - is fake network) > -Chris > > > -----Original Message----- > > From: andyo@prime.net.ua [SMTP:andyo@prime.net.ua] > > Sent: Monday, April 05, 1999 4:09 PM > > To: Rick Knebel > > Cc: questions@FreeBSD.ORG > > Subject: Re: home network > > > > Rick Knebel wrote: > > > > > Hi, > > > > > > I am trying to hook my freebsd 3.1 box up to my MAC computer and > > > use the freebsd box as a gateway and workstation. > > > > > > I have installed an ethernet card in each and hooked them up with a > > > hub. > > > > > > I thought I followed all hte directions in the ppp man pages and > > tutorials > > > but I cannot get my mac to connect. > > > > > > I will include some of my data next > > > > > > /etc/hosts > > > > > > 127.0.0.1 localhost.uplink.net localhost > > > 209.173.88.243 rknebel.uplink.net rknebel > > > 192.168.1.1 free.uplink.net free > > > 192.168.1.2 mac.uplink.net mac > > > > > > /etc/rc.conf > > > > > > # This file now contains just the overrides from /etc/defaults/rc.conf > > > # please make all changes to this file. > > > > > > # -- sysinstall generated deltas -- # > > > ifconfig_vr0="inet 192.168.1.1 netmask 255.255.255.0" > > > ifconfig_lo0="inet 127.0.0.1" > > > moused_type="intellimouse" > > > moused_enable="YES" > > > gateway_enable="YES" > > > defaultrouter="NO" > > > network_interfaces="lo0 vr0" > > > hostname="rknebel.uplink.net" > > > lpd_enable="YES" # Run the line printer daemon > > > > > > ifconfig -a > > > > > > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > > inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 > > > ether 00:80:c8:e8:e6:aa > > > media: 10baseT/UTP <half-duplex> > > > supported media: autoselect 100baseTX <full-duplex> 100baseTX > > <half-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 10baseT/UTP > > <half-duplex> > > > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > > > tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 > > > inet 209.173.88.243 --> 209.173.88.252 netmask 0xffffff00 > > > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > > > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > > inet 127.0.0.1 netmask 0xff000000 > > > > > > netstats -r > > > > > > Internet: > > > Destination Gateway Flags Refs Use Netif > > Expire > > > default pm3bl1 UGSc 13 4 tun0 > > > localhost localhost UH 0 164 lo0 > > > 192.168.1 link#1 UC 0 0 vr0 > > > pm3bl1 rknebel UH 14 0 tun0 > > > > IMHO Looks wrong that U dont have route entry for ur NIC > > what the reason of it - hard to say > > Also it will be good to have: > > route add rknebel localhost > > as much as > > route add free localhost > > > > > > > > > > > vr0 is my ethernet card. > > > > > > I am using tcp/ip in mac to try and connect. > > > > > > Anything look wrong?? > > > > > > thanks > > > Rick > > > > -- > > Andy V. Oleynik > > (When U aim for perfection, > > U discover it's a moving target ö80) > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Andy V. Oleynik (When U aim for perfection, U discover it's a moving target ö80) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?370A7D08.9C3484B3>