Date: Fri, 22 Jul 2011 17:37:38 +0200 From: Maurizio Vairani <maurizio.vairani@cloverinformatica.it> To: itetcu@FreeBSD.org Cc: ports@FreeBSD.org Subject: FreeBSD Port: apcupsd-3.14.8_1 Message-ID: <4E299942.8080205@cloverinformatica.it>
next in thread | raw e-mail | index | archive | help
Hi, the apcupsd.conf file is the default one with only tree lines changed: UPSCABLE usb UPSTYPE usb DEVICE the apcupsd deamon start successfully but running apcaccess the STATUS line is blank: # apcaccess APC : 001,044,1082 DATE : 2011-06-30 15:09:22 +0000 HOSTNAME : zfsguru.bsd VERSION : 3.14.8 (16 January 2010) freebsd UPSNAME : zfsguru.bsd CABLE : USB Cable MODEL : Back-UPS CS 350 UPSMODE : Stand Alone STARTTIME: 2011-06-30 15:08:57 +0000 STATUS : LINEV : 222.0 Volts LOADPCT : 28.0 Percent Load Capacity BCHARGE : 081.0 Percent TIMELEFT : 29.4 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds OUTPUTV : 230.0 Volts SENSE : Medium DWAKE : 000 Seconds DSHUTD : 180 Seconds LOTRANS : 180.0 Volts HITRANS : 266.0 Volts RETPCT : 000.0 Percent ITEMP : 29.2 C Internal ALARMDEL : Always BATTV : 13.1 Volts LINEFREQ : 50.0 Hz LASTXFER : Unacceptable line voltage changes NUMXFERS : 0 TONBATT : 0 seconds CUMONBATT: 0 seconds XOFFBATT : N/A SELFTEST : NO STESTI : None STATFLAG : 0x07000000 Status Flag SERIALNO : 4B1107P24948 BATTDATE : 2011-02-11 NOMOUTV : 230 Volts NOMINV : 230 Volts NOMBATTV : 12.0 Volts NOMPOWER : 210 Watts FIRMWARE : 807.q10 .I USB FW:q APCMODEL : Back-UPS CS 350 END APC : 2011-06-30 15:09:22 +0000 The UPS is working because running it on Ubuntu on the same machine all works. The output of apcaccess in ubuntu is : APC : 001,045,1144 DATE : 2011-06-30 14:59:12 +0200 HOSTNAME : phenon2 VERSION : 3.14.8 (16 January 2010) debian UPSNAME : phenon2 CABLE : USB Cable MODEL : Back-UPS CS 350 UPSMODE : Stand Alone STARTTIME: 2011-06-30 14:23:36 +0200 STATUS : ONLINE LINEV : 216.0 Volts LOADPCT : 28.0 Percent Load Capacity BCHARGE : 050.0 Percent TIMELEFT : 17.8 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds OUTPUTV : 230.0 Volts SENSE : Medium DWAKE : 000 Seconds DSHUTD : 180 Seconds LOTRANS : 180.0 Volts HITRANS : 266.0 Volts RETPCT : 000.0 Percent ITEMP : 29.2 C Internal ALARMDEL : Always BATTV : 12.8 Volts LINEFREQ : 50.0 Hz LASTXFER : Unacceptable line voltage changes NUMXFERS : 1 XONBATT : 2011-06-30 14:25:52 +0200 TONBATT : 0 seconds CUMONBATT: 33 seconds XOFFBATT : 2011-06-30 14:26:25 +0200 SELFTEST : NO STESTI : None STATFLAG : 0x07000008 Status Flag SERIALNO : 4B1107P24948 BATTDATE : 2011-02-11 NOMOUTV : 230 Volts NOMINV : 230 Volts NOMBATTV : 12.0 Volts NOMPOWER : 210 Watts FIRMWARE : 807.q10 .I USB FW:q APCMODEL : Back-UPS CS 350 END APC : 2011-06-30 14:59:17 +0200 Any idea ? Thanks in advance Maurizio
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E299942.8080205>