Date: Mon, 23 Jan 2012 12:25:09 -0800 From: Jack Vogel <jfvogel@gmail.com> To: Marcin Markowski <mmarkowski@leon.pl> Cc: freebsd-performance@freebsd.org Subject: Re: Performance problem using Intel X520-DA2 Message-ID: <CAFOYbcksi7KBpEjH=-hHEoTr35ynwYk98Ushw9nzR27H%2BGVBFA@mail.gmail.com> In-Reply-To: <a231a44c6c803075c7b456a6189ff6ce@leon.pl> References: <a231a44c6c803075c7b456a6189ff6ce@leon.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
There may be some interrupt handling changes coming, but at least for
the moment you need to increase the storm threshold, or set it to 0 to
disable it.
Jack
On Mon, Jan 23, 2012 at 12:20 PM, Marcin Markowski <mmarkowski@leon.pl>wrote:
> Hello,
>
> We use FreeBSD as sniffer (libpcap programs) and we experience
> performance problems when incoming traffic is greater than 7.5Gbps/s.
> If we check 'top' we see that first irq from network card is using
> 100% CPU. I've tested this on FreeBSD 8.2-RELEASE and 9.0-RELEASE
> (on 9.0 we can see also kernel thread named {ix0 que} using 100% CPU),
> and both systems behave the same. In logs we see also:
> interrupt storm detected on "irq268:"; throttling interrupt source
>
> Our server platform is Intel SR2600URBRP, 2x Xeon X5650, 6GB RAM and
> NIC Intel X520-DA2.
>
> I'm not sure if problem is with NIC or motherboard in SR2600URBRP,
> because everything is fine when we use other server configuration:
> Intel SR1630GP, 1x Xeon X3450, 8GB RAM, NIC X520-DA2
>
> My /boot/loader.conf:
> kern.ipc.nmbclusters=262144
> hw.ixgbe.rxd=2048
> hw.ixgbe.txd=2048
> hw.ixgbe.num_queues=16
>
> /etc/sysctl.conf
> hw.intr_storm_threshold=10000
>
> --
> Marcin Markowski
>
> ______________________________**_________________
> freebsd-performance@freebsd.**org <freebsd-performance@freebsd.org>mailing list
> http://lists.freebsd.org/**mailman/listinfo/freebsd-**performance<http://lists.freebsd.org/mailman/listinfo/freebsd-performance>;
> To unsubscribe, send any mail to "freebsd-performance-**
> unsubscribe@freebsd.org <freebsd-performance-unsubscribe@freebsd.org>"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFOYbcksi7KBpEjH=-hHEoTr35ynwYk98Ushw9nzR27H%2BGVBFA>