Date: Sat, 2 Sep 2000 21:40:12 -0700 (PDT) From: patl@Phoenix.Volant.ORG To: questions@freebsd.org Subject: FBSD 4.1-stable + XFree86 4.0.1 -vs- i810 Message-ID: <ML-3.4.967956012.5188.patl@asimov.phoenix.volant.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I'm trying to get X11 working under FreeBSD 4.1-stable (as of 2000-09-01) on a machine with an Intel 810 chipset (HP Pavilion 6730). I've searched the mailing list archives; and they provided me with some of the information I need; but evidently not quite enough. I CVSup'd stable and ports, built 'world', rebooted, built, installed, and configured the XFree86-4 port, and kldload'ed agp.ko. But when I try startx, it gives me a 'This should not happen. Unresolved function call.' error. What am I missing? (And where is the 'right' place to put the kldload to have it run automatically?) I've attached the probe info from the boot, the XFree86 log, and the XF86Config file. Thanks, -Pat [-- Attachment #2 --] Sep 2 21:11:55 susa /kernel: Copyright (c) 1992-2000 The FreeBSD Project. Sep 2 21:11:55 susa /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Sep 2 21:11:55 susa /kernel: The Regents of the University of California. All rights reserved. Sep 2 21:11:55 susa /kernel: FreeBSD 4.1-STABLE #0: Fri Sep 1 10:39:48 PDT 2000 Sep 2 21:11:55 susa /kernel: toor@:/usr/obj/usr/src/sys/GENERIC Sep 2 21:11:55 susa /kernel: Timecounter "i8254" frequency 1193182 Hz Sep 2 21:11:55 susa /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (598.18-MHz 686-class CPU) Sep 2 21:11:55 susa /kernel: Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Sep 2 21:11:55 susa /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> Sep 2 21:11:55 susa /kernel: real memory = 65994752 (64448K bytes) Sep 2 21:11:55 susa /kernel: avail memory = 60125184 (58716K bytes) Sep 2 21:11:55 susa /kernel: Preloaded elf kernel "kernel" at 0xc0416000. Sep 2 21:11:55 susa /kernel: Pentium Pro MTRR support enabled Sep 2 21:11:55 susa /kernel: md0: Malloc disk Sep 2 21:11:55 susa /kernel: npx0: <math processor> on motherboard Sep 2 21:11:55 susa /kernel: npx0: INT 16 interface Sep 2 21:11:55 susa /kernel: pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> on motherboard Sep 2 21:11:55 susa /kernel: pci0: <PCI bus> on pcib0 Sep 2 21:11:55 susa /kernel: pci0: <Intel 82810 (i810 GMCH) SVGA controller> at 1.0 irq 3 Sep 2 21:11:55 susa /kernel: pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 Sep 2 21:11:55 susa /kernel: pci1: <PCI bus> on pcib1 Sep 2 21:11:55 susa /kernel: pci1: <unknown card> (vendor=0x14f1, dev=0x2013) at 11.0 irq 5 Sep 2 21:11:55 susa /kernel: dc0: <LC82C115 PNIC II 10/100BaseTX> port 0x3000-0x30ff mem 0xf4110000-0xf41100ff irq 3 at device 14.0 on pci1 Sep 2 21:11:55 susa /kernel: dc0: Ethernet address: 00:a0:cc:36:96:11 Sep 2 21:11:55 susa /kernel: miibus0: <MII bus> on dc0 Sep 2 21:11:55 susa /kernel: dcphy0: <Intel 21143 NWAY media interface> on miibus0 Sep 2 21:11:55 susa /kernel: dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Sep 2 21:11:55 susa /kernel: isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 Sep 2 21:11:55 susa /kernel: isa0: <ISA bus> on isab0 Sep 2 21:11:55 susa /kernel: atapci0: <Intel ICH ATA66 controller> port 0x1800-0x180f at device 31.1 on pci0 Sep 2 21:11:55 susa /kernel: ata0: at 0x1f0 irq 14 on atapci0 Sep 2 21:11:55 susa /kernel: ata1: at 0x170 irq 15 on atapci0 Sep 2 21:11:55 susa /kernel: uhci0: <Intel 82801AA (ICH) USB controller> port 0x1820-0x183f irq 11 at device 31.2 on pci0 Sep 2 21:11:55 susa /kernel: usb0: <Intel 82801AA (ICH) USB controller> on uhci0 Sep 2 21:11:55 susa /kernel: usb0: USB revision 1.0 Sep 2 21:11:55 susa /kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Sep 2 21:11:55 susa /kernel: uhub0: 2 ports with 2 removable, self powered Sep 2 21:11:55 susa /kernel: uhub0: port 1 power on failed, IOERROR Sep 2 21:11:55 susa /kernel: uhub0: port 2 power on failed, IOERROR Sep 2 21:11:55 susa /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9 Sep 2 21:11:55 susa /kernel: chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0x1300-0x133f,0x1200-0x12ff irq 9 at device 31.5 on pci0 Sep 2 21:11:55 susa /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Sep 2 21:11:55 susa /kernel: fdc0: FIFO enabled, 8 bytes threshold Sep 2 21:11:55 susa /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Sep 2 21:11:55 susa /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Sep 2 21:11:55 susa /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Sep 2 21:11:55 susa /kernel: kbd0 at atkbd0 Sep 2 21:11:55 susa /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Sep 2 21:11:55 susa /kernel: psm0: model Generic PS/2 mouse, device ID 0 Sep 2 21:11:55 susa /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Sep 2 21:11:55 susa /kernel: sc0: <System console> at flags 0x100 on isa0 Sep 2 21:11:55 susa /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Sep 2 21:11:55 susa /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Sep 2 21:11:55 susa /kernel: sio0: type 16550A Sep 2 21:11:55 susa /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Sep 2 21:11:55 susa /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Sep 2 21:11:55 susa /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Sep 2 21:11:55 susa /kernel: plip0: <PLIP network interface> on ppbus0 Sep 2 21:11:55 susa /kernel: lpt0: <Printer> on ppbus0 Sep 2 21:11:55 susa /kernel: lpt0: Interrupt-driven port Sep 2 21:11:55 susa /kernel: ppi0: <Parallel I/O> on ppbus0 Sep 2 21:11:55 susa /kernel: ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable Sep 2 21:11:55 susa /kernel: ad0: 9768MB <ST310212A> [19846/16/63] at ata0-master using UDMA33 Sep 2 21:11:55 susa /kernel: acd0: CDROM <SAMSUNG CD-ROM SC-148> at ata1-master using PIO4 Sep 2 21:11:55 susa /kernel: Mounting root from ufs:/dev/ad0s1a Sep 2 21:17:45 susa login: ROOT LOGIN (broot) ON ttyv1 Sep 2 21:20:01 susa /kernel: agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 3 at device 1.0 on pci0 [-- Attachment #3 --] XFree86 Version 4.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 1 July 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1-STABLE i386 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep 2 21:20:40 2000 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "Sun 19 inch FD Premium" (**) | |-->Device "i810" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (WW) Option "XkbCompat" requires an string value (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.2 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.1 (II) Loader running on freebsd (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.1 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7120 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7121 card 8086,7121 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 4352,5933 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:0b:0: chip 14f1,2013 card 155d,6793 rev 01 class 07,80,00 hdr 00 (II) PCI: 01:0e:0: chip 11ad,c115 card 11ad,c001 rev 25 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0x00003000 - 0x000030ff (0x100) IXB [1] -1 0x00003400 - 0x000034ff (0x100) IXB [2] -1 0x00003800 - 0x000038ff (0x100) IXB [3] -1 0x00003c00 - 0x00003cff (0x100) IXB (II) Bus 1 non-prefetchable memory range: [0] -1 0xf4100000 - 0xf41fffff (0x100000) MXB (II) Bus 1 prefetchable memory range: (--) PCI:*(0:1:0) Intel i810 rev 3, Mem @ 0xf8000000/26, 0xf4000000/19 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MXB [1] -1 0x00000000 - 0x0000ffff (0x10000) IXB (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB [3] -1 0x000c0000 - 0x000effff (0x30000) MXB [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB [5] -1 0x00000000 - 0x000001ff (0x200) IXBE (II) Active PCI resource ranges: [0] -1 0xf4110000 - 0xf411ffff (0x10000) MXBE [1] -1 0xf4100000 - 0xf41fffff (0x100000) MXBE [2] -1 0xf4000000 - 0xf407ffff (0x80000) MXB(B) [3] -1 0xf8000000 - 0xfbffffff (0x4000000) MXB(B) [4] -1 0x00003000 - 0x000030ff (0x100) IXBE [5] -1 0x00003400 - 0x000034ff (0x100) IXBE [6] -1 0x00001300 - 0x000013ff (0x100) IXBE [7] -1 0x00001200 - 0x000012ff (0x100) IXBE [8] -1 0x00001810 - 0x0000181f (0x10) IXBE [9] -1 0x00001820 - 0x0000183f (0x20) IXBE [10] -1 0x00001800 - 0x000018ff (0x100) IXBE (II) PCI Memory resource overlap reduced 0xf4100000 from 0xf41fffff to 0xf410ffff (II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000180f (II) Active PCI resource ranges after removing overlaps: [0] -1 0xf4110000 - 0xf411ffff (0x10000) MXBE [1] -1 0xf4100000 - 0xf410ffff (0x10000) MXBE [2] -1 0xf4000000 - 0xf407ffff (0x80000) MXB(B) [3] -1 0xf8000000 - 0xfbffffff (0x4000000) MXB(B) [4] -1 0x00003000 - 0x000030ff (0x100) IXBE [5] -1 0x00003400 - 0x000034ff (0x100) IXBE [6] -1 0x00001300 - 0x000013ff (0x100) IXBE [7] -1 0x00001200 - 0x000012ff (0x100) IXBE [8] -1 0x00001810 - 0x0000181f (0x10) IXBE [9] -1 0x00001820 - 0x0000183f (0x20) IXBE [10] -1 0x00001800 - 0x0000180f (0x10) IXBE (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB [3] -1 0x000c0000 - 0x000effff (0x30000) MXB [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB [5] -1 0x00000000 - 0x000001ff (0x200) IXBE (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB [3] -1 0x000c0000 - 0x000effff (0x30000) MXB [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB [5] -1 0xf4110000 - 0xf411ffff (0x10000) MXBE [6] -1 0xf4100000 - 0xf410ffff (0x10000) MXBE [7] -1 0xf4000000 - 0xf407ffff (0x80000) MXB(B) [8] -1 0xf8000000 - 0xfbffffff (0x4000000) MXB(B) [9] -1 0x00000000 - 0x000001ff (0x200) IXBE [10] -1 0x00003000 - 0x000030ff (0x100) IXBE [11] -1 0x00003400 - 0x000034ff (0x100) IXBE [12] -1 0x00001300 - 0x000013ff (0x100) IXBE [13] -1 0x00001200 - 0x000012ff (0x100) IXBE [14] -1 0x00001810 - 0x0000181f (0x10) IXBE [15] -1 0x00001820 - 0x0000183f (0x20) IXBE [16] -1 0x00001800 - 0x0000180f (0x10) IXBE (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.1 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.1.7 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.1 (II) Loading font FreeType (II) LoadModule: "i810" (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.2 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.1 (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815 (--) Assigning device section with no busID to primary device (--) Chipset i810 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB [3] -1 0x000c0000 - 0x000effff (0x30000) MXB [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB [5] -1 0xf4110000 - 0xf411ffff (0x10000) MXBE [6] -1 0xf4100000 - 0xf410ffff (0x10000) MXBE [7] -1 0xf4000000 - 0xf407ffff (0x80000) MXB(B) [8] -1 0xf8000000 - 0xfbffffff (0x4000000) MXB(B) [9] -1 0x00000000 - 0x000001ff (0x200) IXBE [10] -1 0x00003000 - 0x000030ff (0x100) IXBE [11] -1 0x00003400 - 0x000034ff (0x100) IXBE [12] -1 0x00001300 - 0x000013ff (0x100) IXBE [13] -1 0x00001200 - 0x000012ff (0x100) IXBE [14] -1 0x00001810 - 0x0000181f (0x10) IXBE [15] -1 0x00001820 - 0x0000183f (0x20) IXBE [16] -1 0x00001800 - 0x0000180f (0x10) IXBE (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MXB [3] -1 0x000c0000 - 0x000effff (0x30000) MXB [4] -1 0x00000000 - 0x0009ffff (0xa0000) MXB [5] -1 0xf4110000 - 0xf411ffff (0x10000) MXBE [6] -1 0xf4100000 - 0xf410ffff (0x10000) MXBE [7] -1 0xf4000000 - 0xf407ffff (0x80000) MXB(B) [8] -1 0xf8000000 - 0xfbffffff (0x4000000) MXB(B) [9] 0 0x000a0000 - 0x000affff (0x10000) MSB [10] 0 0x000b0000 - 0x000b7fff (0x8000) MSB [11] 0 0x000b8000 - 0x000bffff (0x8000) MSB [12] -1 0x00000000 - 0x000001ff (0x200) IXBE [13] -1 0x00003000 - 0x000030ff (0x100) IXBE [14] -1 0x00003400 - 0x000034ff (0x100) IXBE [15] -1 0x00001300 - 0x000013ff (0x100) IXBE [16] -1 0x00001200 - 0x000012ff (0x100) IXBE [17] -1 0x00001810 - 0x0000181f (0x10) IXBE [18] -1 0x00001820 - 0x0000183f (0x20) IXBE [19] -1 0x00001800 - 0x0000180f (0x10) IXBE [20] 0 0x000003b0 - 0x000003bb (0xc) ISB [21] 0 0x000003c0 - 0x000003df (0x20) ISB (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (**) I810(0): Depth 16, (--) framebuffer bpp 16 (==) I810(0): RGB weight 565 (==) I810(0): Default visual is TrueColor (**) I810(0): Option "NoAccel" (--) I810(0): Chipset: "i810" (--) I810(0): Linear framebuffer at 0xF8000000 (--) I810(0): IO registers at addr 0xF4000000 (--) I810(0): Will alloc AGP framebuffer: 4096 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): Sun 19 inch FD Premium: Using hsync range of 30.00-107.00 kHz (II) I810(0): Sun 19 inch FD Premium: Using vrefresh range of 48.00-120.00 Hz (II) I810(0): Clock range: 12.00 to 163.00 MHz (WW) I810(0): Mode "1024x768" deleted (unknown reason) (WW) I810(0): Mode "1600x1200" deleted (bad mode clock/interlace/doublescan) (WW) I810(0): Mode "1600x1200" deleted (bad mode clock/interlace/doublescan) (WW) I810(0): Mode "1600x1200" deleted (bad mode clock/interlace/doublescan) (WW) I810(0): Mode "1600x1200" deleted (bad mode clock/interlace/doublescan) (WW) I810(0): Mode "1792x1344" deleted (insufficient memory for mode) (WW) I810(0): Mode "1792x1344" deleted (insufficient memory for mode) (WW) I810(0): Mode "1856x1392" deleted (insufficient memory for mode) (WW) I810(0): Mode "1856x1392" deleted (insufficient memory for mode) (WW) I810(0): Mode "1920x1440" deleted (insufficient memory for mode) (WW) I810(0): Mode "1920x1440" deleted (insufficient memory for mode) (--) I810(0): Virtual size is 1280x1024 (pitch 2048) (**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (**) I810(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (**) I810(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz (==) I810(0): DPI set to (75, 75) (II) Loading sub module "cfb16" (II) LoadModule: "cfb16" (II) Loading /usr/X11R6/lib/modules/libcfb16.a (II) Module cfb16: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "cfb" (II) LoadModule: "cfb" (II) Loading /usr/X11R6/lib/modules/libcfb.a (II) Module cfb: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "mfb" (II) LoadModule: "mfb" (II) Loading /usr/X11R6/lib/modules/libmfb.a (II) Module mfb: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0xf4000000 - 0xf407ffff (0x80000) MSB [1] 0 0xf8000000 - 0xfbffffff (0x4000000) MSB [2] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B) [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B) [4] -1 0x000f0000 - 0x000fffff (0x10000) MXB [5] -1 0x000c0000 - 0x000effff (0x30000) MXB [6] -1 0x00000000 - 0x0009ffff (0xa0000) MXB [7] -1 0xf4110000 - 0xf411ffff (0x10000) MXBE [8] -1 0xf4100000 - 0xf410ffff (0x10000) MXBE [9] -1 0xf4000000 - 0xf407ffff (0x80000) MXB(B) [10] -1 0xf8000000 - 0xfbffffff (0x4000000) MXB(B) [11] 0 0x000a0000 - 0x000affff (0x10000) MSB(OprD) [12] 0 0x000b0000 - 0x000b7fff (0x8000) MSB(OprD) [13] 0 0x000b8000 - 0x000bffff (0x8000) MSB(OprD) [14] -1 0x00000000 - 0x000001ff (0x200) IXBE [15] -1 0x00003000 - 0x000030ff (0x100) IXBE [16] -1 0x00003400 - 0x000034ff (0x100) IXBE [17] -1 0x00001300 - 0x000013ff (0x100) IXBE [18] -1 0x00001200 - 0x000012ff (0x100) IXBE [19] -1 0x00001810 - 0x0000181f (0x10) IXBE [20] -1 0x00001820 - 0x0000183f (0x20) IXBE [21] -1 0x00001800 - 0x0000180f (0x10) IXBE [22] 0 0x000003b0 - 0x000003bb (0xc) ISB(OprU) [23] 0 0x000003c0 - 0x000003df (0x20) ISB(OprU) (==) I810(0): Write-combining range (0xf4000000,0x80000) was already clear (==) I810(0): Write-combining range (0xf8000000,0x2000000) (==) I810(0): Write-combining range (0xa0000,0x10000) was already clear Setting dot clock to 36.0 MHz [ 0x10 0x1 0x40 ] [ 18 3 4 ] () i810: chose watermark 0x22007000: (tab.freq 36.0) (==) I810(0): Backing store disabled This should not happen! An unresolved function was called! Fatal server error: When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". [-- Attachment #4 --] # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module # Load "glx" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "pc104" Option "XkbLayout" "us" Option "XkbCompat" "" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Sun 19 inch FD Premium" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-107 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 48-120 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by xf86config: Section "Device" # Identifier "HP Pavilion built-in Intel 810" Identifier "i810" Driver "i810" Option "no_accel" #VideoRam 11264 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" # Device "HP Pavilion built-in Intel 810" Device "i810" Monitor "Sun 19 inch FD Premium" DefaultDepth 16 Subsection "Display" Depth 8 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ML-3.4.967956012.5188.patl>