From owner-freebsd-current@FreeBSD.ORG Sat Sep 25 10:48:25 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BDBA816A4CE for ; Sat, 25 Sep 2004 10:48:25 +0000 (GMT) Received: from www.mmlab.cse.yzu.edu.tw (www.mmlab.cse.yzu.edu.tw [140.138.145.166]) by mx1.FreeBSD.org (Postfix) with ESMTP id B132443D49 for ; Sat, 25 Sep 2004 10:48:24 +0000 (GMT) (envelope-from avatar@mmlab.cse.yzu.edu.tw) Received: by www.mmlab.cse.yzu.edu.tw (qmail, from userid 1000) id 0E6194EFCDA; Sat, 25 Sep 2004 18:48:24 +0800 (CST) Received: from localhost (localhost [127.0.0.1]) by www.mmlab.cse.yzu.edu.tw (qmail) with ESMTP id 026344EFCD1 for ; Sat, 25 Sep 2004 18:48:23 +0800 (CST) Date: Sat, 25 Sep 2004 18:48:23 +0800 (CST) From: Tai-hwa Liang To: freebsd-current@freebsd.org Message-ID: <04092518423116.97410@www.mmlab.cse.yzu.edu.tw> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: 5.3-BETA5/6.0-CURRENT freeze with dynamic loaded modules X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 Sep 2004 10:48:25 -0000 Testing platforms: ASUS A7N8X and A7N8X-X, nForce2 chipset Vanilla 5.3-BETA4/BETA5 installation booted successfully. However, if g_md.ko was loaded in /boot/loader.conf or was loaded manually in boot prompt, the system will freeze at "lo0: bpf attached" without panic dump. -CURRENT kernel seems to boot on both system w/ or w/o apic compiled in kernel. However, if usd.ko was loaded by usbd after the kernel is booted, the kernel will freeze at "ehci0: [GIANT-LOCKED]." Meanwhile, the OHCI version turned out to be corrupted: ohci1: mem 0xee005000-0xee005fff irq 11 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb0: OHCI version 15.15, legacy support usb0: unsupported OHCI revision ohci1: USB init failed device_attach: ohci1 attach returned 5 I have no idea about why the system freeze without dumping core whilst loading g_md.ko(in boot prompt or in loader.conf) or usb.ko(by usbd) dynamically. It seems that the tentative workaround is to compile md device statically and load usb.ko prior before usbd was launched such like doing that in /boot/loader.conf. Following are the related dmesg with -CURRENT cvsup'ed about 1 day ago. apic enabled, no PREEMPTION, SCHED_4BSD, all workaround applied: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Thu Sep 23 11:10:15 CST 2004 root@tinderbox.localdomain:/usr/src/sys/i386/compile/tinderbox Preloaded elf kernel "/boot/kernel/kernel" at 0xc072c000. Preloaded elf module "/boot/kernel/umass.ko" at 0xc072c244. Preloaded elf module "/boot/kernel/usb.ko" at 0xc072c2f0. Preloaded elf module "/boot/modules/if_nv.ko" at 0xc072c398. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc072c444. Calibrating clock(s) ... i8254 clock: 1193189 Hz Timecounter "i8254" frequency 1193189 Hz quality 0 Calibrating TSC clock ... TSC clock: 2171615263 Hz CPU: AMD Athlon(tm) XP 3000+ (2171.62-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff AMD Features=0xc0400000 Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1073676288 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000003edbdfff, 1046052864 bytes (255384 pages) avail memory = 1045307392 (996 MB) mptable_probe: MP Config Table has bad signature: \^E\^G Table 'FACP' at 0x3fff3040 Table 'APIC' at 0x3fff74c0 MADT: Found table at 0x3fff74c0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: APIC: CPU 0 has ACPI ID 0 bios32: Found BIOS32 Service Directory header at 0xc00fb000 bios32: Entry = 0xfb490 (c00fb490) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb4c0 pnpbios: Found PnP BIOS data at 0xc00fbf20 pnpbios: Entry = f0000:bf50 Rev = 1.0 Other BIOS signatures found: MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff mem: Pentium Pro MTRR support enabled null: io: random: acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000888 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=01e010de) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00fdeb0 PCI-Only Interrupts: 5 11 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x04 3 4 5 7 9 10 11 12 14 15 slot 2 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 2 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 12 D 0x04 3 4 5 7 9 10 11 12 14 15 slot 3 255 31 A 0x0f 3 4 5 7 9 10 11 12 14 15 slot 3 255 31 B 0x0f 3 4 5 7 9 10 11 12 14 15 slot 3 255 31 C 0x0f 3 4 5 7 9 10 11 12 14 15 slot 3 255 31 D 0x0f 3 4 5 7 9 10 11 12 14 15 slot 4 1 6 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 1 6 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 1 6 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 4 1 6 D 0x04 3 4 5 7 9 10 11 12 14 15 slot 5 1 7 A 0x04 3 4 5 7 9 10 11 12 14 15 slot 5 1 7 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 1 7 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 1 7 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 6 1 8 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 6 1 8 B 0x04 3 4 5 7 9 10 11 12 14 15 slot 6 1 8 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 6 1 8 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 7 1 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 7 1 9 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 7 1 9 C 0x04 3 4 5 7 9 10 11 12 14 15 slot 7 1 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 8 1 10 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 8 1 10 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 8 1 10 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 8 1 10 D 0x04 3 4 5 7 9 10 11 12 14 15 slot 9 1 11 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 9 1 11 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 9 1 11 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 9 1 11 D 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 30 A 0x04 3 4 5 7 9 10 11 12 14 15 embedded 0 30 B 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 30 C 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 30 D 0x03 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 1 func 0 AcpiOsDerivePciId: bus 0 dev 1 func 0 AcpiOsDerivePciId: bus 0 dev 1 func 0 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.APCS irq 0: [23] 23+ high,level,sharable 0.1.0 \\_SB_.PCI0.APCS irq 0: [23] 23+ high,level,sharable 0.1.1 \\_SB_.PCI0.APCF irq 0: [20 21 22] 0+ high,level,sharable 0.2.0 \\_SB_.PCI0.APCG irq 0: [20 21 22] 0+ high,level,sharable 0.2.1 \\_SB_.PCI0.APCL irq 0: [20 21 22] 0+ high,level,sharable 0.2.2 \\_SB_.PCI0.APCH irq 0: [20 21 22] 0+ high,level,sharable 0.4.0 \\_SB_.PCI0.APCI irq 0: [20 21 22] 0+ high,level,sharable 0.5.0 \\_SB_.PCI0.APCJ irq 0: [20 21 22] 0+ high,level,sharable 0.6.0 \\_SB_.PCI0.APCK irq 0: [20 21 22] 0+ high,level,sharable 0.6.1 \\_SB_.PCI0.APCM irq 0: [20 21 22] 0+ high,level,sharable 0.13.0 \\_SB_.PCI0.AP3C irq 0: [20 21 22] 0+ high,level,sharable 0.12.0 \\_SB_.PCI0.APCZ irq 0: [20 21 22] 0+ high,level,sharable 0.9.0 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x10de, dev=0x01e0, revid=0xa2 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x01eb, revid=0xa2 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x01ee, revid=0xa2 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x01ed, revid=0xa2 bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x01ec, revid=0xa2 bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x01ef, revid=0xa2 bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0060, revid=0xa3 bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d000, size 5, enabled pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS) pcib0: possible interrupts: 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCF (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCG (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCL (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCH (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCI (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCJ (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCK (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCM (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.AP3C (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCZ (references 1, priority 100): interrupts: 22 21 20 penalty: 100 100 100 \\_SB_.PCI0.APCS (references 2, priority 40): interrupts: 23 penalty: 20 ioapic0: Changing polarity for pin 23 to high pcib0: slot 1 INTA routed to irq 23 via \\_SB_.PCI0.APCS found-> vendor=0x10de, dev=0x0064, revid=0xa2 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=23 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base ee004000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF) pcib0: possible interrupts: 20 21 22 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCF (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCG (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCL (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCH (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCI (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCJ (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCK (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCM (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.AP3C (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 \\_SB_.PCI0.APCZ (references 1, priority 200): interrupts: 22 21 20 penalty: 200 200 200 ioapic0: Changing polarity for pin 22 to high pcib0: slot 2 INTA routed to irq 22 via \\_SB_.PCI0.APCF found-> vendor=0x10de, dev=0x0067, revid=0xa3 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ee005000, size 12, enabled pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCG) pcib0: possible interrupts: 20 21 22 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCG (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.APCL (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.APCH (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.APCI (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.APCJ (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.APCK (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.APCM (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.AP3C (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 \\_SB_.PCI0.APCZ (references 1, priority 303): interrupts: 21 20 22 penalty: 300 300 310 ioapic0: Changing polarity for pin 21 to high pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.APCG found-> vendor=0x10de, dev=0x0067, revid=0xa3 bus=0, slot=2, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ee000000, size 8, enabled pcib0: matched entry for 0.2.INTC (src \\_SB_.PCI0.APCL) pcib0: possible interrupts: 20 21 22 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCL (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 \\_SB_.PCI0.APCH (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 \\_SB_.PCI0.APCI (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 \\_SB_.PCI0.APCJ (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 \\_SB_.PCI0.APCK (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 \\_SB_.PCI0.APCM (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 \\_SB_.PCI0.AP3C (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 \\_SB_.PCI0.APCZ (references 1, priority 406): interrupts: 20 22 21 penalty: 400 410 410 ioapic0: Changing polarity for pin 20 to high pcib0: slot 2 INTC routed to irq 20 via \\_SB_.PCI0.APCL found-> vendor=0x10de, dev=0x0068, revid=0xa3 bus=0, slot=2, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ee001000, size 12, enabled map[14]: type 4, range 32, base 0000d400, size 3, enabled pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APCH) pcib0: possible interrupts: 20 21 22 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCH (references 1, priority 510): interrupts: 22 21 20 penalty: 510 510 510 \\_SB_.PCI0.APCI (references 1, priority 510): interrupts: 22 21 20 penalty: 510 510 510 \\_SB_.PCI0.APCJ (references 1, priority 510): interrupts: 22 21 20 penalty: 510 510 510 \\_SB_.PCI0.APCK (references 1, priority 510): interrupts: 22 21 20 penalty: 510 510 510 \\_SB_.PCI0.APCM (references 1, priority 510): interrupts: 22 21 20 penalty: 510 510 510 \\_SB_.PCI0.AP3C (references 1, priority 510): interrupts: 22 21 20 penalty: 510 510 510 \\_SB_.PCI0.APCZ (references 1, priority 510): interrupts: 22 21 20 penalty: 510 510 510 pcib0: slot 4 INTA routed to irq 22 via \\_SB_.PCI0.APCH found-> vendor=0x10de, dev=0x0066, revid=0xa1 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc00, size 7, enabled map[18]: type 1, range 32, base ee002000, size 12, enabled pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.APCJ) pcib0: possible interrupts: 20 21 22 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCI (references 1, priority 613): interrupts: 21 20 22 penalty: 610 610 620 \\_SB_.PCI0.APCJ (references 1, priority 613): interrupts: 21 20 22 penalty: 610 610 620 \\_SB_.PCI0.APCK (references 1, priority 613): interrupts: 21 20 22 penalty: 610 610 620 \\_SB_.PCI0.APCM (references 1, priority 613): interrupts: 21 20 22 penalty: 610 610 620 \\_SB_.PCI0.AP3C (references 1, priority 613): interrupts: 21 20 22 penalty: 610 610 620 \\_SB_.PCI0.APCZ (references 1, priority 613): interrupts: 21 20 22 penalty: 610 610 620 pcib0: slot 6 INTA routed to irq 21 via \\_SB_.PCI0.APCJ found-> vendor=0x10de, dev=0x006a, revid=0xa1 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x10de, dev=0x006c, revid=0xa3 bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns) map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x10de, dev=0x0065, revid=0xa2 bus=0, slot=9, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x10de, dev=0x01e8, revid=0xa2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xee004000-0xee004fff irq 22 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee004000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xee005000-0xee005fff irq 21 at device 2.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee005000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: mem 0xee000000-0xee0000ff irq 20 at device 2.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xee000000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered nv0: port 0xd400-0xd407 mem 0xee001000-0xee001fff irq 22 at device 4.0 on pci0 nv0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee001000 nv0: Ethernet address 00:e0:18:eb:15:ed miibus0: on nv0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nv0: bpf attached nv0: Ethernet address: 00:e0:18:eb:15:ed nv0: [GIANT-LOCKED] pci0: at device 6.0 (no driver attached) pcib1: at device 8.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: \\_SB_.PCI0.APC1 irq 0: [16] 16+ high,level,sharable 1.6.0 \\_SB_.PCI0.APC2 irq 0: [17] 17+ high,level,sharable 1.6.1 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.6.2 \\_SB_.PCI0.APC4 irq 0: [19] 19+ high,level,sharable 1.6.3 \\_SB_.PCI0.APC4 irq 0: [19] 19+ high,level,sharable 1.7.0 \\_SB_.PCI0.APC1 irq 0: [16] 16+ high,level,sharable 1.7.1 \\_SB_.PCI0.APC2 irq 0: [17] 17+ high,level,sharable 1.7.2 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.7.3 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.8.0 \\_SB_.PCI0.APC4 irq 0: [19] 19+ high,level,sharable 1.8.1 \\_SB_.PCI0.APC1 irq 0: [16] 16+ high,level,sharable 1.8.2 \\_SB_.PCI0.APC2 irq 0: [17] 17+ high,level,sharable 1.8.3 \\_SB_.PCI0.APC2 irq 0: [17] 17+ high,level,sharable 1.9.0 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.9.1 \\_SB_.PCI0.APC4 irq 0: [19] 19+ high,level,sharable 1.9.2 \\_SB_.PCI0.APC1 irq 0: [16] 16+ high,level,sharable 1.9.3 \\_SB_.PCI0.APC1 irq 0: [16] 16+ high,level,sharable 1.10.0 \\_SB_.PCI0.APC2 irq 0: [17] 17+ high,level,sharable 1.10.1 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.10.2 \\_SB_.PCI0.APC4 irq 0: [19] 19+ high,level,sharable 1.10.3 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.11.0 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.11.1 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.11.2 \\_SB_.PCI0.APC3 irq 0: [18] 18+ high,level,sharable 1.11.3 pci1: on pcib1 pci1: physical bus=1 atapci0: port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x7f msb=0x7f ata1: reset tp2 stat0=10 stat1=00 devices=0x4 ata1: [MPSAFE] pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xec000000-0xedffffff pcib2: prefetched decode 0xe0000000-0xe7ffffff AcpiOsDerivePciId: bus 0 dev 30 func 0 ACPI PCI link initial configuration: \\_SB_.PCI0.APC4 irq 0: [19] 19+ high,level,sharable 2.0.0 pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base ec000000, size 24, enabled pcib2: device (null) requested decoded memory range 0xec000000-0xecffffff map[14]: type 3, range 32, base e0000000, size 27, enabled pcib2: device (null) requested decoded memory range 0xe0000000-0xe7ffffff pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.APC4) pcib2: possible interrupts: 19 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCI (references 1, priority 616): interrupts: 20 22 21 penalty: 610 620 620 \\_SB_.PCI0.APCK (references 1, priority 616): interrupts: 20 22 21 penalty: 610 620 620 \\_SB_.PCI0.APCM (references 1, priority 616): interrupts: 20 22 21 penalty: 610 620 620 \\_SB_.PCI0.AP3C (references 1, priority 616): interrupts: 20 22 21 penalty: 610 620 620 \\_SB_.PCI0.APCZ (references 1, priority 616): interrupts: 20 22 21 penalty: 610 620 620 \\_SB_.PCI0.APC4 (references 6, priority 120): interrupts: 19 penalty: 20 \\_SB_.PCI0.APC1 (references 5, priority 0): interrupts: 0 penalty: 100000 \\_SB_.PCI0.APC2 (references 5, priority 0): interrupts: 0 penalty: 100000 \\_SB_.PCI0.APC3 (references 9, priority 0): interrupts: 0 penalty: 100000 ioapic0: Changing polarity for pin 19 to high pcib2: slot 0 INTA routed to irq 19 via \\_SB_.PCI0.APC4 found-> vendor=0x10de, dev=0x0110, revid=0xb2 bus=2, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=19 powerspec 2 supports D0 D3 current D0 pci2: at device 0.0 (no driver attached) fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x821 0x831 0x821 0x821 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x821 0x829 0x821 0x821 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port psmcpnp0 irq 12 on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 unknown: not probed (disabled) unknown: not probed (disabled) npx0: [FAST] npx0: on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xd4000-0xd57ff,0xd0000-0xd3fff,0xc0000-0xcc7ff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 2171615263 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata0-master: setting PIO4 on nVidia nForce2 chip ata0-master: setting UDMA133 on nVidia nForce2 chip ad0: ATA-7 disk at ata0-master ad0: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA133 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ATAPI_RESET time = 50us ata1-master: setting PIO4 on nVidia nForce2 chip ata1-master: setting UDMA33 on nVidia nForce2 chip acd0: CDROM drive at ata1 as master acd0: read 687KB/s (8937KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe2:ata1:0:0:0): error 6 (probe2:ata1:0:0:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 GEOM: new disk ad0 [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20964762 [1] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20964825 l:201326580 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:222291405 l:17816085 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 10733958144 end 10733990399 GEOM: Configure ad0s2, start 10733990400 length 103079208960 end 113813199359 GEOM: Configure ad0s3, start 113813199360 length 9121835520 end 122935034879 MBREXT Slice 5 on ad0s2: [0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:201326517 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s5, start 32256 length 103079176704 end 103079208959 GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s3b, start 268435456 length 2121048064 end 2389483519 GEOM: Configure ad0s3c, start 0 length 9121835520 end 9121835519 GEOM: Configure ad0s3d, start 2389483520 length 16777216 end 2406260735 GEOM: Configure ad0s3e, start 2406260736 length 1476395008 end 3882655743 GEOM: Configure ad0s3f, start 3882655744 length 5239179776 end 9121835519 Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init Linux ELF exec handler installed procfs registered linprocfs registered