Date: Thu, 19 Jul 2012 14:40:02 -0400 From: Pablo Saldivia <psaldivia@telefoniacentro.cl> To: freebsd-stable@freebsd.org Subject: motherboard Message-ID: <50085482.6070804@telefoniacentro.cl>
next in thread | raw e-mail | index | archive | help
Hello list
I have a problem with my motherboard, with four 82573L Gigabit Ethernet
Controller integrated,
with freebsd 8.1 only work one ethernet em1 , em0 , em2 and em3 not work
dmesg info
[ 5.301681] e1000e 0000:03:00.0: Disabling ASPM L1
[ 5.301706] e1000e 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 5.301727] e1000e 0000:03:00.0: setting latency timer to 64
[ 5.301963] e1000e 0000:03:00.0: irq 41 for MSI/MSI-X
[ 5.302457] e1000e 0000:03:00.0: Disabling ASPM L0s
[ 5.371770] e1000e 0000:03:00.0: (unregistered net_device): The NVM
Checksum Is Not Valid
[ 5.389922] e1000e: probe of 0000:03:00.0 failed with error -5
the problem its the same in linux and freebsd, /Windows simply doesn't
check the NVM checksum and work fine :(
I probe install new driver, fix the eeprom //fixeep-82573-dspd.sh /
/
lemon@pfSense:~$ sudo sh fixeep-82573-dspd.sh eth0
eth0: is a "82573L Gigabit Ethernet Controller"
This fixup is applicable to your hardware
fixeep-82573-dspd.sh: 34: Bad substitution
fixeep-82573-dspd.sh: 39: Bad substitution
I probe edit netdev.c in the driver and eliminate check NVM checksum
/
if (i == 2) {
e_err("The NVM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
change to
if (i == 2) {
e_err("The NVM Checksum Is Not Valid\n");
return;
}
and recompile but nothing
Probe bootutil of Intel tool
Flasheable enable :(
lemon@pfSense:~/Intel/APPS/BootUtil/Linux32$ sudo ./bootutil32 -NIC=1
-FLASHENABLE
Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.3.27.0
Copyright (C) 2003-2012 Intel Corporation
Enabling boot ROM on port 1...Unsupported feature
Port Network Address Series WOL Flash Firmware Version
==== =============== ======= === ================================= =======
1 80014C362E39 Gigabit NO LOM,UEFI,PXE Enabled,FCOE
2 00E04C362E3A Gigabit YES LOM,PXE
3 00E04C362E3B Gigabit NO LOM,UEFI,PXE Enabled,FCOE
4 00E04C362E3C Gigabit NO LOM,UEFI,PXE Enabled,FCOE
New firmware
lemon@pfSense:~/Intel/APPS/BootUtil/Linux32$ sudo ./bootutil32 -UP=PXE -ALL
Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.3.27.0
Copyright (C) 2003-2012 Intel Corporation
Flash on LOM device not supported on port 1
Flash on LOM device not supported on port 2
Flash on LOM device not supported on port 3
Flash on LOM device not supported on port 4
Port Network Address Series WOL Flash Firmware Version
==== =============== ======= === ================================= =======
1 80014C362E39 Gigabit NO LOM,UEFI,PXE Enabled,FCOE
2 00E04C362E3A Gigabit YES LOM,PXE
3 00E04C362E3B Gigabit NO LOM,UEFI,PXE Enabled,FCOE
4 00E04C362E3C Gigabit NO LOM,UEFI,PXE Enabled,FCOE
is very hard this work any idea please i need help
thanks in advance
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50085482.6070804>