Date: Thu, 9 Mar 95 10:58:26 MST From: terry@cs.weber.edu (Terry Lambert) To: kav@ihlpf.att.com Cc: questions@FreeBSD.org Subject: Re: AT&T Starlan NAU Problem Message-ID: <9503091758.AA06726@cs.weber.edu> In-Reply-To: <9503091435.AA05286@ig1.att.att.com> from "kav@ihlpf.att.com" at Mar 9, 95 08:34:00 am
next in thread | previous in thread | raw e-mail | index | archive | help
> I'm having problems trying to use an AT&T StarLan 10 NAU (ie0) on the > February 10th snapshot of FreeBSD 2.0. I couldn't find anything to > determine the status of this driver, but I noticed that the > installation program did list it as a supported internet card. > > During an FTP of a large file I see reset messages (which it seems to > recover from). Sometimes there are no reset messages - the system just > locks up tighter than a drum. I also tried NFS but as you can imagine that > only caused the problem quicker. > > The card is a 16K card at the standard settings. Is this a known problem > with the driver? Is there a recommended card that I should be using? Garrett Wollman wrote this driver, and it should work (mostly). There is a known problem with 6386/33E WGS systems (the old AT&T tower machines that use the Intel supplied motherboard). What hardware are you using? If the 6386/33E, there is an AT&T supplied (not USL!) fix that you will probably need to get out of the former NCR to truly be happy with it. It's a serious software hack, and I don't know the status of it as far as how legal it would be for you to roll back into the BSD driver (I suspect you wouldn't be alloed to). The author of the fix, when he used to be with AT&T, is Kurt Mahan, but he doesn't have any code (I asked him). If necessary, I can maybe get the update information from Davis County, Utah (who uses these systems) to let you dig up a disk on your end and disassemble the code. It amounts to writing the memory on the card, reading it, and comparing it, and if it doesn't match, writing it again. I replaced all the NAU cards on these behemoths with 3COM 3C503's and haven't had a problem. Apparently WD cards don't like the motherboard either. Terry Lambert terry@cs.weber.edu --- Any opinions in this posting are my own and not those of my present or previous employers.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9503091758.AA06726>