Date: Mon, 27 Nov 2006 10:17:30 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Nicolae Namolovan <adrenalinup@gmail.com> Cc: freebsd-net@freebsd.org, andre@freebsd.org, support@syskonnect.de Subject: Re: Marvell Yukon 88E8056 FreeBsd Drivers Message-ID: <20061127011729.GA60591@cdnetworks.co.kr> In-Reply-To: <f027bef40611251420s6e898e4iba9cf5928266fb5@mail.gmail.com> References: <f027bef40611240533k453e90dfve6f662794bba3b84@mail.gmail.com> <20061125015223.GA51565@cdnetworks.co.kr> <f027bef40611251420s6e898e4iba9cf5928266fb5@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Nov 26, 2006 at 12:20:46AM +0200, Nicolae Namolovan wrote: > Hooray, msk.HEAD.diff worked ! But only on the CURRENT.. > Thanks for the report. It would be even better if you can post dmesg output related with msk(4) and e1000phy(4). > For those who don't know very well the "patch" tool(like me ;p), > msk.HEAD.diff create some new dirs, you must provide to the patch > utility the -p option(thanks to the folk from irc), here's how I got > it work(not sure if that's 100% correct): > cp msk.HEAD.diff /usr/src/ > cd /usr/src/ > patch -i msk.HEAD.diff -p > > But I need to use it on a production server and the CURRENT one is too > unstable, without too much thinking I just run ping -f 127.0.0.1 and > after some minutes I got kernel panic, heh. > I can't sure it's related with msk(4) but I'll try on my box. > I think the msk driver is a great addition to the 7.0 version, great job ! > > If anyone know how to make Marvell Yukon 88E8056 work under FreeBSD 6 > stable version, I would be very pleased to hear.. > Last week I've finally fixed long standing Rx performance issue so it would show up in src tree soon. Due to the API differences between CURRENT and RELENG_6 it needs more work to run msk(4) on REELENG_6. In addition, I should fix e1000phy(4) first to make manual media selection work on msk(4). So please be patient and give me a more time. > On 11/25/06, Pyun YongHyeon <pyunyh@gmail.com> wrote: > >On Fri, Nov 24, 2006 at 03:33:21PM +0200, Nicolae Namolovan wrote: > > > I took the hack from http://kerneltrap.org/node/7135, that guy said > > > that in linux you must "add the 4364 devID into sky2.c symply search > > > for 4363". > > > > > > I apply the same idea to > > > http://people.freebsd.org/~andre/mykbsd60x86-8.12.1.3-src.tgz, > > > modifyed oem.c and oem.h, > > > > > > oem.c > > > { VENDOR_ID_MRVL, DEV_ID_MRVL_4361, SUBVENDOR_ID_ANY, SUBDEVICE_ID_ANY, > > > "Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.12.1.3"}, > > > { VENDOR_ID_MRVL, DEV_ID_MRVL_4362, SUBVENDOR_ID_ANY, SUBDEVICE_ID_ANY, > > > "Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.1.3"}, > > > + /* custom add..not sure */ > > > + { VENDOR_ID_MRVL, DEV_ID_MRVL_4364, SUBVENDOR_ID_ANY, > > SUBDEVICE_ID_ANY, > > > + "Marvell 88E8056 Gigabit Ethernet Controller, Ver. 8.12.1.3"}, > > > > > > > > > oem.h > > > > > > #define DEV_ID_MRVL_4362 0x4362 > > > + /* custom add..not sure */ > > > + #define DEV_ID_MRVL_4364 0x4364 > > > > > > After I compile it. > > > > > > That was sufficient to make this driver to hook mine Marvell Yukon > > > 88E8056, I can see it in ifconfig but i get: > > > > > > "status: no carrier" > > > > > > Tried to make the interface down/up, put away/back the network cable, > > > didn't help.. Still "no carrier". > > > > > > But it works fine under M Windows (so the problem is not in network > > > cable or the network device).. > > > > > > Any suggestions ? > > > > > > Maybe I must load the Windows drivers with NDIS, but I'm afraid of > > > performance degradation/instability ? > > > > > > Marvell Yukon 88E8056 are in the popular ASUS P5B and Gigabyte 965P-S3 > > > motherboards. > > > > > > >You can find latest msk(4) at the following URL. > >http://people.freebsd.org/~yongari/msk/msk.HEAD.diff > > > >It supports the device ID you mentioned but I don't know whether it > >works or not. ATM the driver has three known issues. > > o poor Rx performance > > I'm working on this but had no clue so far. > > o 88E8055 hangup : > > One user reported system freeze when msk(4) is loaded. Since I don't > > have the hardware it's very hard to fix. :-( > > o Manual speed selection doesn't seem to work. > > It needs additional code for e1000phy(4) to fix. > > > >You need latest CURRENT to aplly the patch. The driver will print very > >ugly number sequnces but you can safely ingore it. > > > >-- > >Regards, > >Pyun YongHyeon > > > > > -- > Best regards, > Nicolae Namolovan. -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061127011729.GA60591>