Date: Sat, 20 Jul 2002 12:05:34 +0200 (CEST) From: Rasmus Skaarup <mfbsd@alfred.skaarup.org> To: freebsd-mobile@freebsd.org Subject: Panics during boot with cardbus device in kernel config Message-ID: <20020720114825.E31676-100000@alfred.skaarup.org> In-Reply-To: <20020712171635.A17362-100000@alfred.skaarup.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, I'm using 5.0-CURRENT and I can't boot my Dell Inspiron 4100 laptop if I use the following in my kernel config: device pccbb device pccard device cardbus But I can boot with: device card device pcic This is what I get at boot with cardbus enabled: *** pccbb: Unable to map IRQ ... Stopped at Debugger+0x45 :xchgl %ebx,in_Debugger.0 db> trace panic(c0328280c) at panic+0x75 resource_list_release(c25ffd84,c25ffc00,c25fea00,3,10) at \ resource_list_release+0xb3 bus_generic_rl_release(c25ffc00,c25fea00,3,10,c25fc140) at \ bus_generic_rl_release+0x5d bus_release_resource pcbb_attach device_probe_and_attach bus_generic_attach device_probe_and_attach bus_generic_attach pcib_attach ... *** As it is written down by hand, minor inperfections can occur. Here's some of my boot process with a kernel compiled with 'card' and 'pcic': *** acpi0: <DELL CPi R > on motherboard acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) ... pcic0: <TI PCI-1420 PCI-CardBus Bridge> at device 1.0 on pci2 pcic0: PCI Memory allocated: 0xf4000000 pcic0: No PCI interrupt routed, trying ISA. pcic0: Polling mode pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-1420 PCI-CardBus Bridge> at device 1.1 on pci2 pcic1: PCI Memory allocated: 0xf4001000 pcic1: No PCI interrupt routed, trying ISA. pcic1: Polling mode pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq] pccard1: <PC Card bus (classic)> on pcic1 pcic2: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 3.0 on pci2 pcic2: PCI Memory allocated: 0xf4002000 pcic2: TI12XX PCI Config Reg: [pwr save][pci only] pccard2: <PC Card bus (classic)> on pcic2 *** Sincerely, Rasmus Skaarup To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020720114825.E31676-100000>