Date: Thu, 7 Jan 2010 09:21:58 -0500 From: Zach Wendell <zwendell@gmail.com> To: freebsd-sparc64@freebsd.org Subject: Sun Netra X1 -- LOM: errors after clearing ram, etc. Message-ID: <e44854981001070621h402b334x942638f52273829e@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Anyone have any ideas about the LOM output below? Just keeps spitting out the same thing over and over... Currently there are no drives installed (waiting for a coworker to bring in an extra HDD and CD-ROM drive so we can install BSD), but there is a stick of non-ECC PC133, 128MB ram installed. I have 3 sticks of non-ECC PC133, and one stick of non-ECC PC100 ram, all 128MB. 2 of them immediately throw a "no memory installed, will not proceed" error -- obviously those are bad (or most likely). The other 2 do what you'll see below... So far, I've only tried one stick at a time, to rule out bad combos, etc. Thanks in advance! ~zmw lom> LOM event: +0h31m28s host power on ` Processor Speed = [Speed Jumper = 7] 400 MHz Baud rate is 9600 8 Data bits, 1 stop bits, no parity (configured from lom) Firmware CORE Sun Microsystems, Inc. @(#) core 1.0.1 2001/02/19 09:55 Hardware Power ON Verifying NVRAM...Done Bootmode is 0 MCR0 = 36a0b004 MCR1 = c0804000 MCR2 = f110006 MCR3 = 6 Ecache Size = 256 KB NVRAM Test Icache Test Dcache Test MMU Test Ecache Tag Addr Test Ecache RAM Addr Test Clearing E$ Tags Done Clearing I/D TLBs Done Probing memory Done MEMBASE=0x0 MEMSIZE=0x8000000 Data Line Test Core Memory Test Processor Speed = 400 MHz Baud rate is 9600 8 Data bits, 1 stop bits, no parity (configured from lom) Firmware CORE Sun Microsystems, Inc. @(#) core 1.0.1 2001/02/19 09:55 Software Power ON Verifying NVRAM...Done Bootmode is 0 MCR0 = 36a0b004 MCR1 = c0804000 MCR2 = f110006 MCR3 = 6 Ecache Size = 256 KB Clearing E$ Tags Done Clearing I/D TLBs Done Probing memory Done MEMBASE=0x0 MEMSIZE=0x8000000 Clearing memory...Done Turing ON MMUs Done Copy ROM to RAM (148440 bytes) Done Orig PC=0x1fff0007efc New PC=0xf0f07f54 ****************************** **************** PSTATE=0000000000000015 TBA=00000000f0f00000 DCU Control=0000000000000000 AFSR=0000000000000000 AFAR=ffffffffffffffb8 PIL=000000000000000f I-SFSR=00000000000010a2 D-SFSR=000000000004002b D-SFAR=00000000000007ff TL=0005 TT=00c0 TPC=00000000f0f0b3f0 TNPC=00000000f0f0b3f4 TL=0004 TT=0034 TPC=00000000f0f05800 TNPC=00000000f0f05804 TL=0003 TT=00c0 TPC=00000000f0f0b3f0 TNPC=00000000f0f0b3f4 TL=0002 TT=0010 TPC=00000000f0f0b3f4 TNPC=00000000f0f0b3f8 TL=0001 TT=0010 TPC=00000000f0f0a42c TNPC=00000000f0f0a430 ********************************************** ********************************************** PSTATE=0000000000000015 TBA=00000000f0000000 DCU Control=0000000000000000 AFSR=0000000000000000 AFAR=ffffffffffffffb8 PIL=000000000000000f I-SFSR=00000000000010a2 D-SFSR=000000000004002b D-SFAR=00000000000007ff TL=0005 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0004 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0003 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0002 TT=0010 TPC=00000000f0000204 TNPC=0000000114800200 TL=0001 TT=0010 TPC=00000000f0003a04 TNPC=00000000f0003a08 ********************************************** ********************************************** PSTATE=0000000000000015 TBA=00000000f0000000 DCU Control=0000000000000000 AFSR=0000000000000000 AFAR=ffffffffffffffb8 PIL=000000000000000f I-SFSR=00000000000010a2 D-SFSR=000000000004002b D-SFAR=00000000000007ff TL=0005 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0004 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0003 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0002 TT=0010 TPC=00000000f0000204 TNPC=0000000114800200 TL=0001 TT=0010 TPC=00000000f0003a04 TNPC=00000000f0003a08 ********************************************** ********************************************** PSTATE=0000000000000015 TBA=00000000f0000000 DCU Control=0000000000000000 AFSR=0000000000000000 AFAR=ffffffffffffffb8 PIL=000000000000000f I-SFSR=00000000000010a2 D-SFSR=000000000004002b D-SFAR=00000000000007ff TL=0005 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0004 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0003 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0002 TT=0010 TPC=00000000f0000204 TNPC=0000000114800200 TL=0001 TT=0010 TPC=00000000f0003a04 TNPC=00000000f0003a08 ********************************************** ********************************************** PSTATE=0000000000000015 TBA=00000000f0000000 DCU Control=0000000000000000 AFSR=0000000000000000 AFAR=ffffffffffffffb8 PIL=000000000000000f I-SFSR=00000000000010a2 D-SFSR=000000000004002b D-SFAR=00000000000007ff TL=0005 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0004 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0003 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0002 TT=0010 TPC=00000000f0000204 TNPC=0000000114800200 TL=0001 TT=0010 TPC=00000000f0003a04 TNPC=00000000f0003a08 ********************************************** ********************************************** PSTATE=0000000000000015 TBA=00000000f0000000 DCU Control=0000000000000000 AFSR=0000000000000000 AFAR=ffffffffffffffb8 PIL=000000000000000f I-SFSR=00000000000010a2 D-SFSR=000000000004002b D-SFAR=00000000000007ff TL=0005 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204 TL=0| lom> LOM event: +0h33m5s host power off lom>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e44854981001070621h402b334x942638f52273829e>