From owner-freebsd-current Wed Sep 11 12:42:24 1996 Return-Path: owner-current Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id MAA24078 for current-outgoing; Wed, 11 Sep 1996 12:42:24 -0700 (PDT) Received: from callisto.cids.org.za (callisto.cids.org.za [146.64.58.43]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id MAA24070 for ; Wed, 11 Sep 1996 12:42:20 -0700 (PDT) Received: from angel.cids.org.za (angel.cids.org.za [146.64.84.9]) by callisto.cids.org.za (8.7.5/8.7.3) with ESMTP id VAA12481; Wed, 11 Sep 1996 21:42:08 +0200 (SAT) Received: (from jhay@localhost) by angel.cids.org.za (8.7.5/8.7.2) id VAA16586; Wed, 11 Sep 1996 21:42:00 +0200 (SAT) From: John Hay Message-Id: <199609111942.VAA16586@angel.cids.org.za> Subject: Re: Does IPX routing work? ... Of course. :-) To: rgrimes@GndRsh.aac.dev.com (Rodney W. Grimes) Date: Wed, 11 Sep 1996 21:42:00 +0200 (SAT) Cc: jkh@time.cdrom.com, current@freebsd.org In-Reply-To: <199609111821.LAA22152@GndRsh.aac.dev.com> from "Rodney W. Grimes" at "Sep 11, 96 11:21:20 am" X-Mailer: ELM [version 2.4ME+ PL19 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-current@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > > I only see one ethernet card configured, but there are 3 entries, > > one for each for 802.3, Ethernet_II and Ethernet_SNAP. Of the > > 3, only the Ethernet_II entry shows a LAN address. > > Your novell server is configured to handle these 3 frame types, that > means just about any Novell client can find the bugger... your > probably using Ethernet_SNAP to support Mac systems. > > To be fully functional your IPX router will need to deal with all > 3 of these frame types. As it stands now the only one supported is > Ethernet_II. > > You could go around and start converting all the clients to Ethernet_II, > which is not a bad idea in itself (makes for sniffing the network a lot > easier :-)). That is true. I'm lucky, I have convinced the people here to run only ETHERNET_II in our building a long time ago. But then we don't have any Mac's. > > If you can convert all the clients on the otherside of the router to > be using Ethernet_II your will be up and running with the current code. > This can easily be done for most current Novell clients (ODI and NDIS > drivers), the other NetX stuff is not so easy, and if I remeber correctly > you folks have all the sales systems running NetX.exe over packet drivers. :-( > If I remember correctly the packet drivers have a "-n" option to switch from the default (for them) ETHERNET_II to 802.3. So you should only need to take that out. John -- John Hay -- jhay@mikom.csir.co.za