Date: Mon, 13 Dec 2004 21:05:03 -0600 (CST) From: Joe Greco <jgreco@ns.sol.net> To: hackers@freebsd.org, scsi@freebsd.org Subject: Tyan S2882/FreeBSD 4.10R = lots of errors? Message-ID: <200412140305.iBE35389006490@aurora.sol.net>
next in thread | raw e-mail | index | archive | help
I'm seeing a huge number of SCSI errors on a new pair of Tyan S2882UG3N
boards. Dual Opteron 250, 6GB RAM (PAE), and a few drives. I originally
did this under 4.10R but moved to 4.11-PRE from the jp snap server, to
no good end.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11-PRERELEASE-20041214-JPSNAP #0: Mon Dec 13 21:30:25 EST 2004
root@:/usr/src/sys/compile/FEEDER_SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Opteron(tm) Processor 250 (2389.05-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory = 6442450944 (6291456K bytes)
avail memory = 6203609088 (6058212K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 4 pins in IOAPIC #1
Programming 4 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x00030011, at 0xfebff000
io2 (APIC): apic id: 4, version: 0x00030011, at 0xfebfe000
Preloaded elf kernel "kernel" at 0xc037f000.
ccd0-11: Concatenated disk drivers
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 15 entries at 0xc00f48c0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
pci0: <PCI bus> on pcib0
pcib8: <PCI to PCI bridge (vendor=1022 device=7460)> at device 6.0 on pci0
IOAPIC #0 intpin 18 -> irq 9
pci3: <PCI bus> on pcib8
pci3: <ATI Mach64-GR graphics accelerator> at 6.0 irq 9
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xbc00-0xbc3f mem 0xfeaa0000-0xfeabffff,0xfeafb000-0xfeafbfff irq 9 at device 8.0 on pci3
fxp0: Ethernet address 00:e0:81:2c:78:8a
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1022 device=7468)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 7.1
pci0: <unknown card> (vendor=0x1022, dev=0x746a) at 7.2 irq 2
chip0: <PCI to Other bridge (vendor=1022 device=746b)> at device 7.3 on pci0
pcib9: <PCI to PCI bridge (vendor=1022 device=7450)> at device 10.0 on pci0
IOAPIC #1 intpin 0 -> irq 10
IOAPIC #1 intpin 1 -> irq 11
pci2: <PCI bus> on pcib9
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xac00-0xacff,0xa000-0xa0ff mem 0xfc8fc000-0xfc8fdfff irq 10 at device 6.0 on pci2
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xa400-0xa4ff,0xa800-0xa8ff mem 0xfc8fe000-0xfc8fffff irq 11 at device 6.1 on pci2
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfc8a0000-0xfc8affff,0xfc8b0000-0xfc8bffff irq 10 at device 9.0 on pci2
bge0: Ethernet address: 00:e0:81:2c:76:1c
miibus1: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfc8d0000-0xfc8dffff,0xfc8e0000-0xfc8effff irq 11 at device 9.1 on pci2
bge1: Ethernet address: 00:e0:81:2c:76:1d
miibus2: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1022, dev=0x7451) at 10.1
pcib10: <PCI to PCI bridge (vendor=1022 device=7450)> at device 11.0 on pci0
pci1: <PCI bus> on pcib10
pci0: <unknown card> (vendor=0x1022, dev=0x7451) at 11.1
pcib1: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib4
pcib5: <Host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib5
pcib6: <Host to PCI bridge> on motherboard
pci9: <PCI bus> on pcib6
pcib7: <Host to PCI bridge> on motherboard
pci10: <PCI bus> on pcib7
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd0fff,0xd1000-0xd27ff,0xd2800-0xd3fff,0xd4000-0xd4fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
we0 at port 0x2e8 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
IPv6 packet filtering initialized, logging limited to 100 packets/entry
DUMMYNET initialized (011031)
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
da1 at ahd0 bus 0 target 1 lun 0
da1: <FUJITSU MAS3735NC 0103> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 70093MB (143552136 512 byte sectors: 255H 63S/T 8935C)
da4 at ahd0 bus 0 target 4 lun 0
da4: <FUJITSU MAS3735NC 0103> Fixed Direct Access SCSI-3 device
da4: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da4: 70093MB (143552136 512 byte sectors: 255H 63S/T 8935C)
da3 at ahd0 bus 0 target 3 lun 0
da3: <FUJITSU MAS3735NC 0103> Fixed Direct Access SCSI-3 device
da3: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da3: 70093MB (143552136 512 byte sectors: 255H 63S/T 8935C)
da2 at ahd0 bus 0 target 2 lun 0
da2: <FUJITSU MAS3735NC 0103> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da2: 70093MB (143552136 512 byte sectors: 255H 63S/T 8935C)
da0 at ahd0 bus 0 target 0 lun 0
da0: <IBM DPSS-309170M S96H> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
Anyways, it will spew tons of crap every second, hundreds of lines at times.
The system is pushing out massive amounts of network traffic (~150Mbps on
one, ~500Mbps on the other, lots of jumbo frames).
I had a second unit which wasn't exhibiting this behaviour until it started
exchanging data with the first one (~120Mbps).
It complains about ahd1 too which seems most unusual given that the second
SCSI bus is empty.
I haven't used these boards before, and I haven't used this chassis before,
so there's a great possibility that this is somehow my fault. The SCSI
backplane is supposed to be terminated by jumper. One of my units is
configured that way. The other, I stuck a terminator on just for good
measure. No appreciable difference.
Unfortunately, I don't know how to decode this into something meaningful.
The "PCI error Interrupt" sounds bad. The "Address or Write Phase Parity
Error Detected in TARG" sounds bad too, and would have sounded like SCSI
cabling/term, except there's nothing on that 2nd bus...
I've tried cranking the SCSI bus speeds down as low as 80Mbps, too, no
real difference.
Is there a disk I can sacrifice to the SCSI gods? :-)
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x36 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x44] SCSIPHASE[0x0] SCSIBUS[0x38]
LASTPHASE[0x40] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 9 LASTSCB 0xffff CURRSCB 0x42 NEXTSCB 0x0
qinstart = 7367 qinfifonext = 7367
QINFIFO:
WAITING_TID_QUEUES:
3 ( 0x2d )
Pending list:
45 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
66 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
37 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 9
Kernel Free SCB list: 36 27 71 77 49 22 4 32 40 1 74 56 17 46 20 26 33 9 34 69 42 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x42
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0xce]
SG_CACHE_SHADOW[0x18] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x44] SHADDR = 0x025add702, SHCNT = 0xfff8fe
HADDR = 0x025add000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0xf, SINDEX = 0x118, DINDEX = 0x106
ahd0: SCBPTR == 0x42, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x2d
CDB 28 0 6 0 18 33
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x1c Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x1cf Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x46] SCSIPHASE[0x0] SCSIBUS[0x4e]
LASTPHASE[0x40] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 17 LASTSCB 0xffff CURRSCB 0x31 NEXTSCB 0x0
qinstart = 7471 qinfifonext = 7471
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x31 )
3 ( 0x24 0x28 0x39 )
2 ( 0x2 0x16 0x4d 0x47 0x1b 0x20 0x1 )
4 ( 0x3f )
Pending list:
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
27 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
71 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
22 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
40 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
36 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
49 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
56 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
37 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
Total 17
Kernel Free SCB list: 61 4 44 17 66 46 20 26 33 9 34 69 42 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x38
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0xce]
SG_CACHE_SHADOW[0x48] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x44] SHADDR = 0x027a93702, SHCNT = 0xfff8fe
HADDR = 0x027a93000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0xf, SINDEX = 0x148, DINDEX = 0x10a
ahd0: SCBPTR == 0x38, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x31
CDB 28 0 6 0 48 c4
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x6 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x21 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x7b Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0x46]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 18 LASTSCB 0xffff CURRSCB 0x4d NEXTSCB 0x0
qinstart = 7960 qinfifonext = 7960
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x4d )
4 ( 0x4 0x16 )
2 ( 0x1d )
3 ( 0x2 )
Pending list:
22 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
4 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
40 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 18
Kernel Free SCB list: 66 71 56 36 46 20 26 33 9 34 69 42 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x25
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xe0] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x4] SHADDR = 0x11248c000, SHCNT = 0x0
HADDR = 0x11248c000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0x16, SINDEX = 0x1e0, DINDEX = 0x10a
ahd0: SCBPTR == 0x4, SCB_NEXT == 0x16, SCB_NEXT2 == 0x1d
CDB 28 0 5 ce b0 a1
STACK: 0x206 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x26 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0xad]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 18 LASTSCB 0xffff CURRSCB 0x25 NEXTSCB 0x0
qinstart = 8537 qinfifonext = 8537
QINFIFO:
WAITING_TID_QUEUES:
4 ( 0x25 )
3 ( 0x9 0x20 0x31 0x22 )
Pending list:
34 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x7]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
49 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
9 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
46 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
Total 18
Kernel Free SCB list: 26 36 57 22 77 71 56 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x6e] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x1d
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xb0] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x6e] MDFFSTAT[0x4] SHADDR = 0x11ea6a000, SHCNT = 0x0
HADDR = 0x11ea6a000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0xffff, SINDEX = 0x1b0, DINDEX = 0xa9
ahd0: SCBPTR == 0x1d, SCB_NEXT == 0x11, SCB_NEXT2 == 0x2c
CDB 2a 0 8 1 b0 6b
STACK: 0x207 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x1a Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x1a Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x9e Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0xbe]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 15 LASTSCB 0xffff CURRSCB 0x2a NEXTSCB 0x0
qinstart = 9177 qinfifonext = 9177
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x2a 0x31 0x4a 0x4d 0x24 0x3d 0x3f )
Pending list:
32 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
61 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
36 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
74 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
49 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
42 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
27 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
Total 15
Kernel Free SCB list: 9 26 37 44 46 22 20 34 71 56 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x1b
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xa0] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x4] SHADDR = 0x1246e0000, SHCNT = 0x0
HADDR = 0x1246e0000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0xf, SINDEX = 0x1a0, DINDEX = 0xa9
ahd0: SCBPTR == 0x1b, SCB_NEXT == 0x1d, SCB_NEXT2 == 0x11
CDB 2a 0 3 1 a0 68
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x32 Mode 0x0
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xedc8, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x23 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x1c0 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0xd]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 18 LASTSCB 0xffff CURRSCB 0x22 NEXTSCB 0x0
qinstart = 9811 qinfifonext = 9811
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
34 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
46 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
27 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
22 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
26 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
37 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
Total 18
Kernel Free SCB list: 44 77 32 9 45 71 56 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x62] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x1b
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xa8] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x62] MDFFSTAT[0x4] SHADDR = 0x023990000, SHCNT = 0x0
HADDR = 0x023990000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0xf, SINDEX = 0x1a8, DINDEX = 0xa9
ahd0: SCBPTR == 0x1b, SCB_NEXT == 0x2e, SCB_NEXT2 == 0x14
CDB 2a 0 3 0 a8 68
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x1c0 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0x65]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 16 LASTSCB 0xffff CURRSCB 0x4d NEXTSCB 0x0
qinstart = 9949 qinfifonext = 9949
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
77 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
46 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
34 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
26 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
32 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
74 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
Total 16
Kernel Free SCB list: 49 57 2 37 22 9 45 71 56 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x6a] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x4a
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0x40] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x6a] MDFFSTAT[0x4] SHADDR = 0x1245bc000, SHCNT = 0x0
HADDR = 0x1245bc000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0xf, SINDEX = 0x140, DINDEX = 0xa9
ahd0: SCBPTR == 0x4a, SCB_NEXT == 0x1d, SCB_NEXT2 == 0x1d
CDB 2a 0 8 1 40 3f
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x26 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x22 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x206 Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x5] SCSIPHASE[0x1] SCSIBUS[0x91]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 19 LASTSCB 0xffff CURRSCB 0x22 NEXTSCB 0x0
qinstart = 11586 qinfifonext = 11586
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x22 0x16 0x2 )
2 ( 0x3d 0x31 0x20 )
3 ( 0x25 0x47 )
4 ( 0x1a 0x14 0x1 0x4a 0x4d )
Pending list:
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
74 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
71 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
49 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
46 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x7]
61 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
22 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
45 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
20 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
34 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
26 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
9 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
Total 19
Kernel Free SCB list: 57 42 27 44 29 56 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x66] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x2d
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xd0] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x66] MDFFSTAT[0x4] SHADDR = 0x12441b000, SHCNT = 0x0
HADDR = 0x12441b000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0x4d, SINDEX = 0x1d0, DINDEX = 0x10a
ahd0: SCBPTR == 0x4a, SCB_NEXT == 0x4d, SCB_NEXT2 == 0xff04
CDB 28 0 3 21 69 a9
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x37 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xa, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x7e Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0x1, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x34 Mode 0x0
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0xc3]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 20 LASTSCB 0xffff CURRSCB 0x2a NEXTSCB 0x0
qinstart = 11866 qinfifonext = 11866
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x2a 0x1d )
3 ( 0x20 0x2c 0x9 0x1a 0x25 )
0 ( 0x16 )
2 ( 0x3f 0x39 0x22 0x4d 0x47 )
Pending list:
71 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
34 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
22 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
42 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
36 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
26 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
9 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
44 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 20
Kernel Free SCB list: 46 17 20 61 56 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x66] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x24
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0x20] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x66] MDFFSTAT[0x4] SHADDR = 0x125a78000, SHCNT = 0x0
HADDR = 0x125a78000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x302f, SINDEX = 0x120, DINDEX = 0xa9
ahd0: SCBPTR == 0x0, SCB_NEXT == 0x2d, SCB_NEXT2 == 0x24
CDB 2a 0 0 80 9 40
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x36 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x22 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x204 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0x77]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 16 LASTSCB 0xffff CURRSCB 0x1a NEXTSCB 0x0
qinstart = 12314 qinfifonext = 12314
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
26 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
56 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
9 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
46 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
71 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
22 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 16
Kernel Free SCB list: 32 63 37 36 20 1 44 77 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x16
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0x20] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x4] SHADDR = 0x125f3a000, SHCNT = 0x0
HADDR = 0x125f3a000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0xf, SINDEX = 0x120, DINDEX = 0xa9
ahd0: SCBPTR == 0x16, SCB_NEXT == 0x2e, SCB_NEXT2 == 0x11
CDB 2a 0 8 1 20 61
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x36 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x5] SCSIPHASE[0x1] SCSIBUS[0x21]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 13 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 12466 qinfifonext = 12466
QINFIFO:
WAITING_TID_QUEUES:
2 ( 0x11 )
Pending list:
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
32 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
9 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
71 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
26 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
37 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 13
Kernel Free SCB list: 27 63 49 42 22 29 56 46 1 44 77 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x1a
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0x38] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x4] SHADDR = 0x11c28b000, SHCNT = 0x0
HADDR = 0x11c28b000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0xffff, SINDEX = 0x138, DINDEX = 0x106
ahd0: SCBPTR == 0x1a, SCB_NEXT == 0x3d, SCB_NEXT2 == 0x3d
CDB 2a 0 8 1 38 67
STACK: 0x207 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x2 Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0x1, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x25 Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0x3d]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 15 LASTSCB 0xffff CURRSCB 0x11 NEXTSCB 0x0
qinstart = 12550 qinfifonext = 12550
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x2 0x25 0x1d 0x1a )
4 ( 0x2a 0x1b )
Pending list:
27 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
26 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
71 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
61 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
32 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
56 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 15
Kernel Free SCB list: 74 63 57 22 9 46 1 44 77 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x11
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xb8] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x4] SHADDR = 0x12cf1f000, SHCNT = 0x0
HADDR = 0x12cf1f000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0x1b, SINDEX = 0x1b8, DINDEX = 0x10a
ahd0: SCBPTR == 0x2a, SCB_NEXT == 0x1b, SCB_NEXT2 == 0xff00
CDB 2a 0 8 29 f1 29
STACK: 0x207 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x7d Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0x1, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x25 Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0x38]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 21 LASTSCB 0xffff CURRSCB 0x39 NEXTSCB 0x0
qinstart = 13144 qinfifonext = 13144
QINFIFO:
WAITING_TID_QUEUES:
0 ( 0x14 )
Pending list:
20 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7]
9 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
46 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
71 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
22 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
26 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
37 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
56 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
Total 21
Kernel Free SCB list: 61 44 77 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x1
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xe8] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x4] SHADDR = 0x12da5f000, SHCNT = 0x0
HADDR = 0x12da5f000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0x14, SINDEX = 0x1e8, DINDEX = 0x102
ahd0: SCBPTR == 0xff39, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 39 1 0 0 0 0
STACK: 0x207 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x7e Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0x1, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x1a Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x32 Mode 0x0
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0x57]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 14 LASTSCB 0xffff CURRSCB 0x11 NEXTSCB 0x0
qinstart = 13203 qinfifonext = 13203
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x11 0x39 )
3 ( 0x2a 0x2e 0x9 )
4 ( 0x20 0x3f )
2 ( 0x1d 0x4a )
Pending list:
9 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
46 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
74 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
22 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
56 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
Total 14
Kernel Free SCB list: 36 37 20 71 26 45 1 61 44 77 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x6c] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x2
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0x70] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x6c] MDFFSTAT[0x4] SHADDR = 0x12d622000, SHCNT = 0x0
HADDR = 0x12d622000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x302f, SINDEX = 0x170, DINDEX = 0xa9
ahd0: SCBPTR == 0x0, SCB_NEXT == 0x2d, SCB_NEXT2 == 0x24
CDB 2a 0 0 80 9 40
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x35 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0xc6] SCSIPHASE[0x20] SCSIBUS[0x0]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x2]
SSTAT1[0x19] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 20 LASTSCB 0xffff CURRSCB 0x39 NEXTSCB 0x0
qinstart = 13214 qinfifonext = 13214
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x39 0x1a )
3 ( 0x2e 0x9 0x31 )
4 ( 0x3f 0x38 0x2 0x24 0x25 0x14 0x16 0x47 )
2 ( 0x4a 0x11 0x2d )
Pending list:
45 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
49 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
26 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
71 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
22 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
20 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
36 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
56 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
9 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
46 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
74 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
Total 20
Kernel Free SCB list: 1 61 44 77 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x81ec, SCB 0x20
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0xc] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x83] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x12ebd4000, SHCNT = 0x0
HADDR = 0x12ebd4000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0xf, SINDEX = 0x182, DINDEX = 0x106
ahd0: SCBPTR == 0x20, SCB_NEXT == 0x3f, SCB_NEXT2 == 0x1d
CDB 2a 0 8 81 80 a0
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x1a Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x23 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xa, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x7e Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0x50]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 17 LASTSCB 0xffff CURRSCB 0x1b NEXTSCB 0x0
qinstart = 14779 qinfifonext = 14779
QINFIFO:
WAITING_TID_QUEUES:
2 ( 0x1b 0x20 )
3 ( 0x2e )
Pending list:
46 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
27 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
71 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
56 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
Total 17
Kernel Free SCB list: 22 74 77 61 9 37 26 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x62] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x1d
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0xe8] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x62] MDFFSTAT[0x4] SHADDR = 0x020b40000, SHCNT = 0x0
HADDR = 0x020b40000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x2e, SINDEX = 0x1e8, DINDEX = 0xa9
ahd0: SCBPTR == 0x16, SCB_NEXT == 0xff80, SCB_NEXT2 == 0x1d
CDB 28 0 2 80 81 61
STACK: 0x206 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x38 Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0xc6] SCSIPHASE[0x20] SCSIBUS[0x0]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x2]
SSTAT1[0x19] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 17 LASTSCB 0xffff CURRSCB 0x39 NEXTSCB 0x0
qinstart = 15031 qinfifonext = 15031
QINFIFO:
WAITING_TID_QUEUES:
2 ( 0x39 )
Pending list:
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7]
22 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
56 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
71 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 17
Kernel Free SCB list: 61 46 9 17 32 37 26 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x81ec, SCB 0x4d
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0xc] DFSTATUS[0x89]
SG_CACHE_SHADOW[0xa3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x19e3a000, SHCNT = 0x0
HADDR = 0x19e3a000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x39, SINDEX = 0x1a2, DINDEX = 0xa9
ahd0: SCBPTR == 0x3d, SCB_NEXT == 0x1, SCB_NEXT2 == 0x1
CDB 2a 0 8 81 1 cc
STACK: 0x206 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x37 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xa, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x7e Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0x1, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x1c0 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0xe2]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 20 LASTSCB 0xffff CURRSCB 0x14 NEXTSCB 0x0
qinstart = 17360 qinfifonext = 17360
QINFIFO:
WAITING_TID_QUEUES:
3 ( 0x38 0x1d 0x11 0x39 )
4 ( 0x2d 0x25 0x3f 0x2a 0x9 )
2 ( 0x47 0x3d )
1 ( 0x20 0x2 0x2c 0x2e 0x1 )
Pending list:
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
61 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
9 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
42 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
56 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
71 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
26 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
45 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
77 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
46 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
44 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
20 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
Total 20
Kernel Free SCB list: 36 27 49 22 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x14
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0x68] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x70] MDFFSTAT[0x4] SHADDR = 0x017c79000, SHCNT = 0x0
HADDR = 0x017c79000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0xf, SINDEX = 0x168, DINDEX = 0x108
ahd0: SCBPTR == 0x14, SCB_NEXT == 0x20, SCB_NEXT2 == 0x38
CDB 2a 0 3 0 68 5e
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x7c Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x47] SCSIPHASE[0x0] SCSIBUS[0x2d]
LASTPHASE[0x40] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 18 LASTSCB 0xffff CURRSCB 0x1a NEXTSCB 0x0
qinstart = 17497 qinfifonext = 17497
QINFIFO:
WAITING_TID_QUEUES:
4 ( 0x1a 0x2 )
3 ( 0x3f 0x4d 0x9 )
1 ( 0x25 )
2 ( 0x20 0x38 0x2e 0x14 0x1d 0x2a 0x1 0x2c )
0 ( 0x3d )
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
61 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7]
44 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
42 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
20 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
46 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
56 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
9 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
37 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
45 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
26 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
Total 18
Kernel Free SCB list: 71 74 36 27 49 22 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x39
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0xce]
SG_CACHE_SHADOW[0xb8] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x44] SHADDR = 0x137af0702, SHCNT = 0xfff8fe
HADDR = 0x137af0000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x2, SINDEX = 0x1b8, DINDEX = 0xa9
ahd0: SCBPTR == 0x47, SCB_NEXT == 0xff40, SCB_NEXT2 == 0x11
CDB 28 0 4 81 1 3b
STACK: 0x206 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x37 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xa, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x7e Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0x1, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x32 Mode 0x0
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x44] SCSIPHASE[0x2] SCSIBUS[0x8c]
LASTPHASE[0x40] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 19 LASTSCB 0xffff CURRSCB 0x2a NEXTSCB 0x0
qinstart = 17584 qinfifonext = 17584
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x2a 0x2e 0x2d 0x38 0x1 0x1d )
3 ( 0x39 0x3f )
4 ( 0x2c 0x11 )
Pending list:
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
44 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
56 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
45 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
46 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
42 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
63 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
20 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
32 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x27]
9 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
26 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
77 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
37 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 19
Kernel Free SCB list: 61 71 27 49 22 34 33 66 40 69 4 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x20
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0xce]
SG_CACHE_SHADOW[0x70] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x44] SHADDR = 0x0f6ec702, SHCNT = 0xfff8fe
HADDR = 0x0f6ec000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0x302f, SINDEX = 0x170, DINDEX = 0x10a
ahd0: SCBPTR == 0x0, SCB_NEXT == 0x2d, SCB_NEXT2 == 0x24
CDB 2a 0 0 80 9 40
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x207 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x6] SCSIPHASE[0x1] SCSIBUS[0x39]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 17 LASTSCB 0xffff CURRSCB 0x4a NEXTSCB 0x0
qinstart = 19462 qinfifonext = 19462
QINFIFO:
WAITING_TID_QUEUES:
1 ( 0x4a 0x11 0x22 0x2 )
4 ( 0x28 0x24 0x39 0x31 )
3 ( 0x2d 0x3d )
Pending list:
61 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
45 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
71 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
49 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
57 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
36 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
40 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
69 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
34 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
74 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
9 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
37 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
Total 17
Kernel Free SCB list: 32 29 56 4 1 20 77 66 46 42 22 33 26 5 70 35 31 43 48 58 7 72 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x81ec, SCB 0x45
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0xc] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x12c5ab000, SHCNT = 0x0
HADDR = 0x12c5ab000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0xffff, SINDEX = 0x102, DINDEX = 0x108
ahd0: SCBPTR == 0x45, SCB_NEXT == 0x28, SCB_NEXT2 == 0x3f
CDB 2a 0 8 81 0 38
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x37 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xa, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
Limiting open port RST response from 328 to 200 packets per second
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x26 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x22 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x32 Mode 0x0
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0xc6] SCSIPHASE[0x20] SCSIBUS[0x0]
LASTPHASE[0x0] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x2]
SSTAT1[0x19] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 10 LASTSCB 0xffff CURRSCB 0x1d NEXTSCB 0x0
qinstart = 23261 qinfifonext = 23261
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
43 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7]
72 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
17 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
32 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
27 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
70 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
4 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
42 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
7 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
Total 10
Kernel Free SCB list: 45 48 1 66 63 36 46 26 74 34 35 44 56 40 49 77 61 33 2 5 69 58 31 71 37 57 20 22 9 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x81ec, SCB 0x2b
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0xc] DFSTATUS[0x89]
SG_CACHE_SHADOW[0xa3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x0181c2000, SHCNT = 0x0
HADDR = 0x0181c2000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x302f, SINDEX = 0x1a2, DINDEX = 0xa9
ahd0: SCBPTR == 0x0, SCB_NEXT == 0x2d, SCB_NEXT2 == 0x24
CDB 2a 0 0 80 9 40
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x34 Mode 0x0
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xedc8, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 0 0 0 0 0 0
STACK: 0x23 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x31 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x4] SCSIPHASE[0x1] SCSIBUS[0xa8]
LASTPHASE[0x0] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 14 LASTSCB 0xffff CURRSCB 0x11 NEXTSCB 0x0
qinstart = 30084 qinfifonext = 30084
QINFIFO:
WAITING_TID_QUEUES:
3 ( 0x11 )
4 ( 0x1a 0x42 0x1d 0x30 0x7 0x48 0x4d 0x2 )
Pending list:
17 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
33 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
40 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
72 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
7 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
48 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
66 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
26 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
45 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x47]
49 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
Total 14
Kernel Free SCB list: 1 63 34 27 36 46 5 32 4 61 58 74 56 44 31 37 71 69 42 35 43 70 20 22 9 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x6a] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x2d
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x2c] DFSTATUS[0xc9]
SG_CACHE_SHADOW[0x98] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x6a] MDFFSTAT[0x4] SHADDR = 0x0afd59000, SHCNT = 0x0
HADDR = 0x0afd59000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0xf, SINDEX = 0x198, DINDEX = 0xa9
ahd0: SCBPTR == 0x2d, SCB_NEXT == 0x1a, SCB_NEXT2 == 0x21
CDB 2a 0 7 0 98 b3
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x7b Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0x1, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0x1
CDB 12 0 0 0 24 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x26 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x44] SCSIPHASE[0x2] SCSIBUS[0x5d]
LASTPHASE[0x40] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x9] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 13 LASTSCB 0xffff CURRSCB 0x4d NEXTSCB 0x0
qinstart = 31521 qinfifonext = 31521
QINFIFO:
WAITING_TID_QUEUES:
3 ( 0x4d )
Pending list:
77 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
74 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
31 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x7]
58 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x37]
46 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
1 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
72 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
40 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
56 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
26 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
34 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x17]
Total 13
Kernel Free SCB list: 29 45 48 63 33 37 27 61 7 57 17 5 2 71 4 66 32 49 69 42 35 43 70 20 22 9 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Active, LONGJMP == 0x1ec, SCB 0x3a
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0xce]
SG_CACHE_SHADOW[0x20] SG_STATE[0x3] DFFSXFRCTL[0x0]
SOFFCNT[0x7f] MDFFSTAT[0x44] SHADDR = 0x176eee702, SHCNT = 0xfff8fe
HADDR = 0x176eee000, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0xa9
ahd0: SCBPTR == 0x3a, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 28 0 4 1 20 c7
STACK: 0x207 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd0: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x17 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 80 CMDS_PENDING = 8 LASTSCB 0xffff CURRSCB 0x7 NEXTSCB 0x0
qinstart = 32259 qinfifonext = 32259
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
7 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
29 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
44 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x47]
63 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x7]
40 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
33 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x37]
57 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
36 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x27]
Total 8
Kernel Free SCB list: 72 37 61 5 77 46 17 2 1 58 31 26 27 45 74 48 34 56 71 4 66 32 49 69 42 35 43 70 20 22 9 60 62 24 30 67 6 14 52 55 0 78 47 54 41 15 38 3 8 28 18 21 53 10 50 39 79 68 23 19 51 75 73 16 12 13 11 59 76 25 65 64
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x81ec, SCB 0x7
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1
ahd0: SCBPTR == 0x7, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff04
CDB 28 0 3 b6 68 9
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: Address or Write Phase Parity Error Detected in TARG.
ahd1: PCI error Interrupt
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x26 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
ahd1: REG0 == 0xffff, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x1, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff00
CDB 12 0 0 0 24 0
STACK: 0x22 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd1: Address or Write Phase Parity Error Detected in TARG.
boot() called on cpu#1
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 13 4
done
--
Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net
"We call it the 'one bite at the apple' rule. Give me one chance [and] then I
won't contact you again." - Direct Marketing Ass'n position on e-mail spam(CNN)
With 24 million small businesses in the US alone, that's way too many apples.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412140305.iBE35389006490>