Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 02 Jul 2007 14:13:40 +0200
From:      cpghost <cpghost@cordula.ws>
To:        Ian Smith <smithi@nimnet.asn.au>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: kern.hz="100" stops high-pitched whine
Message-ID:  <4688EBF4.8040409@cordula.ws>
In-Reply-To: <Pine.BSF.3.96.1070701234407.12944G-100000@gaia.nimnet.asn.au>
References:  <Pine.BSF.3.96.1070701234407.12944G-100000@gaia.nimnet.asn.au>

next in thread | previous in thread | raw e-mail | index | archive | help
Ian Smith wrote:
> On Sun, 01 Jul 2007 13:12:28 +0200 cpghost <cpghost@cordula.ws> wrote:
>
>  > I'm using fan-less Soekris (266 MHz) and EPIA (500 MHz)
>  > boards with -STABLE. Those boards have been emitting a
>  > very high pitched annoying whine, similar to a dog
>  > whistle. Not everyone I asked could hear it, but I was,
>  > and it was driving me crazy for months.
>  > 
>  > This whine stopped entirely the moment I put
>  > kern.hz="100" in /boot/loader.conf and rebooted.
>  > Quite relieving!
>
> Possibly a beat frequency between the 1kHz default slicing and some
> faster oscillator on board?  You could play around with kern.clockrate,
> sometimes quite small frequency changes make a difference, especially if
> it's a harmonic.  Default HZ jumped from 100 to 1000 probably around the
> time when more servers were seen running at nearer 3000MHz than 300 :)
>   

Interesting! I've booted the EPIA with Hz=840 and Hz=1160,
and the whine was *considerably* quieter in both cases. It really
seemed to be some kind of harmonic oscillation at Hz=1000.
Now I'm back to HZ=100, which seems to be ideal.

>  > Are there any reasons NOT changing kern.hz from the
>  > default 1000 back to 100? With my typical mix of
>  > desktop apps (EPIA) and networking / server (Soekris),
>  > everything seems to be running just as smoothly with
>  > 100 Hz than with 1000 Hz (testing now for two weeks
>  > without problems). Even playing videos with mplayer
>  > on the EPIA doesn't look different in any way.
>
> No problem then, and a lighter interrupt load; probably enough to notice
> in top.  If you want to run dummynet or something else? wanting quicker
> ticking you could try HZ=200 - 500.  200Hz on my Celeron 300 works well.
>
>  > Is it okay to stay with 100 Hz with this type of
>  > low-speed CPU/boards? Or are there some compelling
>  > reasons not to?
>
> If it's happy, smooth and keeping up, it's fine.
>
> Cheers, Ian
>   

I'll stay with 100 Hz for now. Should I need dummynet, I'll
crank it up slowly.

Thanks,
-cpghost.

-- 
Cordula's Web. http://www.cordula.ws/




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4688EBF4.8040409>