Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Apr 2004 07:32:20 -0400
From:      "Rob G" <admin@internet-helpers.net>
To:        "Bob Johnson" <bob89@bobj.org>, <freebsd-questions@freebsd.org>
Subject:   Re: Networking Questions
Message-ID:  <005101c42081$dd4f7aa0$560dbace@call.gtn.ca>
References:  <006301c41f24$d3a18c40$560dbace@call.gtn.ca> <200404101757.36100.bob89@bobj.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Bob,

This worked out perfectly.  All I did was add the second nic.  COnfigured it
for the First IP in my block and added the Enable Gateway and boom I was off
and surfing :)

Rob G
admin@internet-helpers.net
----- Original Message -----
From: "Bob Johnson" <bob89@bobj.org>
To: <freebsd-questions@freebsd.org>
Cc: "Rob G" <admin@internet-helpers.net>
Sent: Saturday, April 10, 2004 5:57 PM
Subject: Re: Networking Questions


> On Saturday 10 April 2004 01:54 pm, Rob G <"Rob G"
> <admin@internet-helpers.net>> wrote:
> > Hi All,
> >
> > I am new to the list, but I have tried researching the archives and
> > couldn't find exactly what I am looking for and would like your
> > opinion on how to do this:
> >
> > I have a 4Meg DSL connection with Multiple Static IPs.
> >
> > 69.63.33.### is my main IP that my router or System that does
> > authentication will always get.
> >
> > 209.213.231.###/29 is my block of 8 other IP's that route to my main
> > IP.
> >
>
> If your ISP is already routing these numbers to your main IP, then it
> should be easy.
>
> > Right now I have my fsb box running mail/web and other services and I
> > would like it to do the routing for my internal network of 4 or so
> > computers.  I have a Hub that I can plug these other systems in to so
> > that is not a problem.
> >
>
> I believe all you need to do is set gateway_enable="YES" in rc.conf (and
> reboot -- I don't know the manual way to accomplish that).  I think
> your box will automatically figure out which IP numbers are on which
> interface, and forward appropriately.  If not, you will need to set up
> a static route to tell it which interface the 209.../29 subnet is on,
> since it won't use the default gateway to the Internet.  Manually, you
> use the route(8) command to do this.  I think you can automate it with
> the static_routes="" entry in rc.conf, but I don't know the syntax.
>
> > What would be the best way to use my block of statics and have them
> > Route properly through my BSD box.  I would like to stay away from
> > NAT as I know it right now, broadband router, as it causes havoc with
> > my filesharing programs and would like to have my other systems
> > pretty much open to the internet and then start locking them down as
> > need be once I get them seeing the outside world and the outside
> > world seeing them.
>
> You shouldn't need to run a real router daemon for this simple
> situation, so you don't need to mess with router_enable in rc.conf.
>
> Now that I've typed all this, it occurs to me that the better answer is
> for you to read the appropriate section of the FreeBSD Handbook:
>
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-routing.ht
ml
>
> >
> > Regards,
> > Rob G
> > admin@internet-helpers.net
>
> Good luck.
>
> - Bob
>
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?005101c42081$dd4f7aa0$560dbace>