From owner-freebsd-uboot@freebsd.org Sat Oct 26 17:50:44 2019 Return-Path: Delivered-To: freebsd-uboot@mailman.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.nyi.freebsd.org (Postfix) with ESMTP id 99E0217B377 for ; Sat, 26 Oct 2019 17:50:44 +0000 (UTC) (envelope-from manu@bidouilliste.com) Received: from mail.blih.net (mail.blih.net [212.83.177.182]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "mail.blih.net", Issuer "mail.blih.net" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 470pRk4TPgz4RVb for ; Sat, 26 Oct 2019 17:50:42 +0000 (UTC) (envelope-from manu@bidouilliste.com) Received: from mail.blih.net (mail.blih.net [212.83.177.182]) by mail.blih.net (OpenSMTPD) with ESMTP id 1f5927e3; Sat, 26 Oct 2019 19:50:34 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=bidouilliste.com; h=date :from:to:cc:subject:message-id:in-reply-to:references :mime-version:content-type:content-transfer-encoding; s=mail; bh=zv/COV8Mzs1mnYPzD/Ei0eFrY9w=; b=AEvFiSj10ZRTw2v2i9uq+7KBT20q 8fGtoL2O9IzI1zQvBxWD5/g6roQo9Mgmze1IxIwlYEXLema1G2OpTpcTYjG5jDME AMtNBDDGOB6TRbYmUmDeX1p13xfAsFaizEZdX9qQpWNTA3qdqWaY+lX6VuQY3VMZ /gZdipkw4W5pG64= DomainKey-Signature: a=rsa-sha1; c=nofws; d=bidouilliste.com; h=date :from:to:cc:subject:message-id:in-reply-to:references :mime-version:content-type:content-transfer-encoding; q=dns; s= mail; b=W1wi8hA7KBjCSpLa8GMvh8z8EZgOpRlpVnb9Xuvp4gohjjYm4XmuFvS7 8gMIVhsNBT8ljaq31A9FwU1hFFPgIM95ssgj012IT5KSGRVBE9lqQXBFdPLASuWs TBKVYqvnyNyCJFLwYPWaL2FNRTROyEM2MKMfs3E5nuC/DTl72bE= Received: from skull.home.blih.net (ip-9.net-89-3-105.rev.numericable.fr [89.3.105.9]) by mail.blih.net (OpenSMTPD) with ESMTPSA id adafb48e TLS version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO; Sat, 26 Oct 2019 19:50:34 +0200 (CEST) Date: Sat, 26 Oct 2019 19:50:33 +0200 From: Emmanuel Vadot To: Gary Otten Cc: freebsd-uboot@freebsd.org Subject: Re: u-boot-a64-olinuxino difference between U-Boot SPL 2019.10 & U-Boot SPL 2019.07 Message-Id: <20191026195033.c76686d77b75388cadf27d63@bidouilliste.com> In-Reply-To: References: <20191025101832.2b442ecdbf10b68edd7a78ea@bidouilliste.com> X-Mailer: Sylpheed 3.7.0 (GTK+ 2.24.32; amd64-portbld-freebsd13.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-Rspamd-Queue-Id: 470pRk4TPgz4RVb X-Spamd-Bar: - Authentication-Results: mx1.freebsd.org; dkim=pass header.d=bidouilliste.com header.s=mail header.b=AEvFiSj1; dmarc=none; spf=pass (mx1.freebsd.org: domain of manu@bidouilliste.com designates 212.83.177.182 as permitted sender) smtp.mailfrom=manu@bidouilliste.com X-Spamd-Result: default: False [-1.38 / 15.00]; ARC_NA(0.00)[]; RCVD_VIA_SMTP_AUTH(0.00)[]; R_DKIM_ALLOW(-0.20)[bidouilliste.com:s=mail]; NEURAL_HAM_MEDIUM(-0.89)[-0.890,0]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+ip4:212.83.177.182/32]; MV_CASE(0.50)[]; MIME_GOOD(-0.10)[text/plain]; DMARC_NA(0.00)[bidouilliste.com]; NEURAL_HAM_LONG(-0.98)[-0.979,0]; TO_MATCH_ENVRCPT_SOME(0.00)[]; DKIM_TRACE(0.00)[bidouilliste.com:+]; RCPT_COUNT_TWO(0.00)[2]; FREEMAIL_TO(0.00)[gmail.com]; RCVD_NO_TLS_LAST(0.10)[]; FROM_EQ_ENVFROM(0.00)[]; MIME_TRACE(0.00)[0:+]; IP_SCORE(0.39)[ip: (-0.61), ipnet: 212.83.160.0/19(2.44), asn: 12876(0.10), country: FR(-0.00)]; ASN(0.00)[asn:12876, ipnet:212.83.160.0/19, country:FR]; MID_RHS_MATCH_FROM(0.00)[]; RCVD_COUNT_TWO(0.00)[2] X-BeenThere: freebsd-uboot@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Discussions about the use of uboot with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Oct 2019 17:50:44 -0000 On Sat, 26 Oct 2019 13:30:46 -0400 Gary Otten wrote: > I placed the file loader.efi in the /efi/boot/ directory , uboot didn't > appear to find it. I also renamed loader.efi to bootaa64.efi. Results > for both attempts are below. > > loader.efi placed in /efi/boot/ > *************************************************************** > U-Boot SPL 2019.10 (Oct 22 2019 - 12:39:22 -0400) > DRAM: 1024 MiB > Trying to boot from MMC1 > NOTICE: BL31: v2.1(release): > NOTICE: BL31: Built : 10:11:05, Oct 20 2019 > NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) > NOTICE: BL31: Found U-Boot DTB at 0x408c458, model: Olimex A64-Olinuxino > NOTICE: BL31: PMIC: Detected AXP803 on RSB. > > > U-Boot 2019.10 (Oct 22 2019 - 12:39:22 -0400) Allwinner Technology > > CPU: Allwinner A64 (SUN50I) > Model: Olimex A64-Olinuxino > DRAM: 1 GiB > MMC: mmc@1c0f000: 0, mmc@1c10000: 1 > Loading Environment from FAT... Card did not respond to voltage select! > In: serial > Out: serial > Err: serial > Net: phy interface7 > eth0: ethernet@1c30000 > starting USB... > Bus usb@1c1a000: USB EHCI 1.00 > Bus usb@1c1a400: USB OHCI 1.0 > Bus usb@1c1b000: USB EHCI 1.00 > Bus usb@1c1b400: USB OHCI 1.0 > scanning bus usb@1c1a000 for devices... 1 USB Device(s) found > scanning bus usb@1c1a400 for devices... 1 USB Device(s) found > scanning bus usb@1c1b000 for devices... 1 USB Device(s) found > scanning bus usb@1c1b400 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > 32443 bytes read in 8 ms (3.9 MiB/s) > Card did not respond to voltage select! > > Device 0: unknown device > ethernet@1c30000 Waiting for PHY auto negotiation to complete......... > TIMEOUT ! > BOOTP broadcast 1 > > > > I renamed loader.efi to bootaa64.efi, the result is below placed in > /efi/boot/ > ********************************************************************** > > U-Boot SPL 2019.10 (Oct 22 2019 - 12:39:22 -0400) > DRAM: 1024 MiB > Trying to boot from MMC1 > NOTICE: BL31: v2.1(release): > NOTICE: BL31: Built : 10:11:05, Oct 20 2019 > NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) > NOTICE: BL31: Found U-Boot DTB at 0x408c458, model: Olimex A64-Olinuxino > NOTICE: BL31: PMIC: Detected AXP803 on RSB. > > > U-Boot 2019.10 (Oct 22 2019 - 12:39:22 -0400) Allwinner Technology > > CPU: Allwinner A64 (SUN50I) > Model: Olimex A64-Olinuxino > DRAM: 1 GiB > MMC: mmc@1c0f000: 0, mmc@1c10000: 1 > Loading Environment from FAT... Card did not respond to voltage select! > In: serial > Out: serial > Err: serial > Net: phy interface7 > eth0: ethernet@1c30000 > starting USB... > Bus usb@1c1a000: USB EHCI 1.00 > Bus usb@1c1a400: USB OHCI 1.0 > Bus usb@1c1b000: USB EHCI 1.00 > Bus usb@1c1b400: USB OHCI 1.0 > scanning bus usb@1c1a000 for devices... 1 USB Device(s) found > scanning bus usb@1c1a400 for devices... 1 USB Device(s) found > scanning bus usb@1c1b000 for devices... 1 USB Device(s) found > scanning bus usb@1c1b400 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > 32443 bytes read in 8 ms (3.9 MiB/s) > Found EFI removable media binary efi/boot/bootaa64.efi > Scanning disk mmc@1c0f000.blk... > Card did not respond to voltage select! > Scanning disk mmc@1c10000.blk... > Disk mmc@1c10000.blk not ready > Found 3 disks > BootOrder not defined > EFI boot manager: Cannot load any image > 607648 bytes read in 34 ms (17 MiB/s) > Consoles: EFI console > efipart_readwrite: rw=1, blk=0 size=1 status=2 > efipart_readwrite: rw=1, blk=64 size=1 status=2 > efipart_readwrite: rw=1, blk=1 size=1 status=2 > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 > efipart_readwrite: rw=1, blk=0 size=1 status=2 > efipart_readwrite: rw=1, blk=64 size=1 status=2 > efipart_readwrite: rw=1, blk=1 size=1 status=2 > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 > FreeBSD/arm64 EFI loader, Revision 1.1 > > Command line arguments: loader.efi > EFI version: 2.80 > EFI Firmware: Das U-Boot (rev 8217.4096) > Console: efi (0) > Load Path: /efi\boot\bootaa64.efi > Load Device: > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) > Trying ESP: > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) > Setting currdev to disk0p1: > efipart_readwrite: rw=1, blk=0 size=1 status=2 > efipart_readwrite: rw=1, blk=64 size=1 status=2 > efipart_readwrite: rw=1, blk=1 size=1 status=2 > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 > efipart_readwrite: rw=1, blk=0 size=1 status=2 > efipart_readwrite: rw=1, blk=64 size=1 status=2 > efipart_readwrite: rw=1, blk=1 size=1 status=2 > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 > Trying: > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x64800,0x1c93800) > Setting currdev to disk0p2: > efipart_readwrite: rw=1, blk=0 size=1 status=2 > efipart_readwrite: rw=1, blk=64 size=1 status=2 > efipart_readwrite: rw=1, blk=1 size=1 status=2 > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 > efipart_readwrite: rw=1, blk=0 size=1 status=2 > efipart_readwrite: rw=1, blk=64 size=1 status=2 > efipart_readwrite: rw=1, blk=1 size=1 status=2 > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 > Failed to find bootable partition > ## Application terminated, r = 14 in 1 seconds > EFI LOAD FAILED: continuing... > Card did not respond to voltage select! > > Device 0: unknown device > ethernet@1c30000 Waiting for PHY auto negotiation to complete....... When was this loader.efi built ? All the needed commits have made the 12-stable and 12.1 branch so you shouldn't have this problem. > On Fri, Oct 25, 2019 at 4:18 AM Emmanuel Vadot > wrote: > > > > > Hi Gary, > > > > On Thu, 24 Oct 2019 19:37:48 -0400 > > Gary Otten wrote: > > > > > The 2019.10 u-boot I compiled with with the a64-olinuxino_defconfig > > > configuration doesn't find the UFS partition the old one 2019.07 that is > > in > > > the ports pre-compiled does. Is there a configuration setting that I > > must > > > set before compiling? Or did I overlook something else? Is my SD card > > > layout appropriate, or causing the problem? > > > > > > > > *********************************************************************************** > > > U-Boot SPL 2019.07 (from the pre-made package) (this works) > > > (partial bootup txt) > > > > > > Initializing modules: ZFS UFS > > > Load Path: /efi\boot\bootaa64.efi > > > Load Device: > > > > > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) > > > Probing 3 block devices.....* done > > > ZFS found no pools > > > UFS found 1 partition > > > Consoles: EFI console > > > FreeBSD/arm64 EFI loader, Revision 1.1 > > > > > > Command line arguments: loader.efi > > > EFI version: 2.70 > > > EFI Firmware: Das U-Boot (rev 8217.1792) > > > Console: efi (0) > > > Load Device: > > > > > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800) > > > Trying ESP: > > > > > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800) > > > Setting currdev to disk0p2: > > > Loading /boot/defaults/loader.conf > > > Loading /boot/device.hints > > > Loading /boot/loader.conf > > > Loading /boot/loader.conf.local > > > - > > > Loading kernel... > > > > > > > > ******************************************************************************* > > > > > > > > > U-Boot SPL 2019.10 (Compiled by myself) > > > (partial bootup txt) > > > > > > Initializing modules: ZFS UFS > > > Load Path: /efi\boot\bootaa64.efi > > > Load Device: > > > > > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) > > > Probing 3 block devices...... done > > > ZFS found no pools > > > UFS found no partitions > > > Failed to load '/boot/loader.efi' > > > panic: No bootable partitions found! > > > ## Application terminated, r = 1 > > > EFI LOAD FAILED: continuing... > > > Card did not respond to voltage select! > > > Device 0: unknown device > > > ethernet@1c30000 Waiting for PHY auto negotiation to complete......... > > > TIMEOUT ! > > > BOOTP broadcast 1 > > > BOOTP broadcast 2 > > > BOOTP broadcast 3 > > > > > **************************************************************************************************** > > > My SD card layout. > > > > > > da2 MBR (15G) > > > free (993k) > > > 1 efi (200M) > > > free (100M) > > > 2 freebsd (active) (14G) > > > > > > > > > da2s2 BSD (14G) > > > 1 freebsd-ufs (14G) > > > _______________________________________________ > > > freebsd-uboot@freebsd.org mailing list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-uboot > > > To unsubscribe, send any mail to "freebsd-uboot-unsubscribe@freebsd.org" > > > > You are using boot1.efi as EFI/BOOT/BOOTAA64.EFI while you should use > > loader.efi directly. > > U-Boot 2019.10 changed some stuff related to alignement for IO and > > only loader.efi was updated to cope with this changed. > > boot1.efi was never really supported on aarch64. > > > > Cheers, > > > > -- > > Emmanuel Vadot > > > _______________________________________________ > freebsd-uboot@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-uboot > To unsubscribe, send any mail to "freebsd-uboot-unsubscribe@freebsd.org" -- Emmanuel Vadot