Date: Tue, 18 May 2004 19:50:21 +0200 From: "Angelo Turetta" <aturetta@commit.it> To: <freebsd-acpi@freebsd.org> Subject: Panic during halt -p Message-ID: <00c501c43d00$973c43e0$661da8c0@lan>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_00C2_01C43D11.5A9BE100
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hi,
A couple weeks ago I installed a system from the ISO image
5.2-CURRENT-20040428-JPSNAP, on a new HP DL380G3. The system is stable (not
much load for now), all the devices are detected correctly.
The only problem is that I cannot power the system off using ACPI: if I type
'halt -p', the shutdown is executed correctly (OS-wise), but then I get:
--------------------
Syncing disks
done.
Powering system off using ACPI
panic: blockable sleep lock (sleep mutex) acpica subsystem lock @
/usr/src/sys/dev/acpica/Osd/OsdSynch.c:380
at line 655 in file /usr/src/sys/kern/subr_witness.c
cpuid=0;
Debugger("panic")
--------------------
I attached the output from dmesg (not boot -v, sorry), in case it matters. I
don't have a custom kernel by now (still testing before putting in
production).
Is it a known problem? If not, what further detail may I pass to help
identify its source?
Angelo Turetta
http://mail.bestunion.it/aturetta-DL380G3.asl
$ sysctl hw.acpi
hw.acpi.supported_sleep_state: S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 5
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_poweroff: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: 0
hw.acpi.cpu.cx_history: 216058205/0
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 2815
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 2830
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 3045
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
------=_NextPart_000_00C2_01C43D11.5A9BE100
Content-Type: text/plain;
name="mail-dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="mail-dmesg.txt"
Copyright (c) 1992-2004 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 5.2-CURRENT-20040428-JPSNAP #0: Wed Apr 28 01:46:57 GMT 2004=0A=
root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC=0A=
WARNING: WITNESS option enabled, expect reduced performance.=0A=
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09ee000.=0A=
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09ee244.=0A=
ACPI APIC Table: <COMPAQ 00000083>=0A=
Timecounter "i8254" frequency 1193182 Hz quality 0=0A=
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2787.01-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0xf29 Stepping =3D 9=0A=
=
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Hyperthreading: 2 logical CPUs=0A=
real memory =3D 1073717248 (1023 MB)=0A=
avail memory =3D 1041199104 (992 MB)=0A=
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=0A=
cpu0 (BSP): APIC ID: 6=0A=
cpu1 (AP): APIC ID: 7=0A=
ioapic0 <Version 1.1> irqs 0-15 on motherboard=0A=
ioapic1 <Version 1.1> irqs 16-31 on motherboard=0A=
ioapic2 <Version 1.1> irqs 32-47 on motherboard=0A=
ioapic3 <Version 1.1> irqs 48-63 on motherboard=0A=
random: <entropy source, Software, Yarrow>=0A=
Pentium Pro MTRR support enabled=0A=
cpu0 on motherboard=0A=
cpu1 on motherboard=0A=
npx0: [FAST]=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
acpi0: <COMPAQ P29> on motherboard=0A=
ACPI-1197: *** Info: There are no GPE blocks defined in the FADT=0A=
acpi0: [GIANT-LOCKED]=0A=
acpi0: Power Button (fixed)=0A=
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000=0A=
pcibios: BIOS version 2.10=0A=
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0=0A=
acpi_cpu0: <CPU> on acpi0=0A=
acpi_cpu1: <CPU> on acpi0=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_tz0: <Thermal Zone> on acpi0=0A=
pcib0: <ACPI Host-PCI bridge> on acpi0=0A=
pci0: <ACPI PCI bus> on pcib0=0A=
pcib0: slot 15 INTA is routed to irq 7=0A=
pci0: <display, VGA> at device 3.0 (no driver attached)=0A=
pci0: <base peripheral> at device 4.0 (no driver attached)=0A=
pci0: <base peripheral> at device 4.2 (no driver attached)=0A=
isab0: <PCI-ISA bridge> at device 15.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <ServerWorks CSB5 UDMA100 controller> port =
0x2000-0x200f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0=0A=
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000=0A=
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0=0A=
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170=0A=
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376=0A=
ata1: simplex device, DMA on primary only=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 7 =
at device 15.2 on pci0=0A=
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf5ef0000=0A=
ohci0: [GIANT-LOCKED]=0A=
usb0: OHCI version 1.0, legacy support=0A=
usb0: SMM does not respond, resetting=0A=
usb0: <OHCI (generic) USB controller> on ohci0=0A=
usb0: USB revision 1.0=0A=
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 4 ports with 4 removable, self powered=0A=
pcib1: <ACPI Host-PCI bridge> on acpi0=0A=
pci1: <ACPI PCI bus> on pcib1=0A=
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem =
0xf7cf0000-0xf7cf3fff,0xf7dc0000-0xf7dfffff irq 30 at device 3.0 on pci1=0A=
ciss0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xf7dc0000=0A=
ciss0: [GIANT-LOCKED]=0A=
pcib2: <ACPI Host-PCI bridge> on acpi0=0A=
pci2: <ACPI PCI bus> on pcib2=0A=
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem =
0xf7ef0000-0xf7efffff irq 29 at device 1.0 on pci2=0A=
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf7ef0000=0A=
miibus0: <MII bus> on bge0=0A=
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0=0A=
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, =
1000baseTX-FDX, auto=0A=
bge0: Ethernet address: 00:0e:7f:ee:61:d3=0A=
bge0: [GIANT-LOCKED]=0A=
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem =
0xf7ee0000-0xf7eeffff irq 31 at device 2.0 on pci2=0A=
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf7ee0000=0A=
miibus1: <MII bus> on bge1=0A=
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1=0A=
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, =
1000baseTX-FDX, auto=0A=
bge1: Ethernet address: 00:0e:7f:ee:61:d2=0A=
bge1: [GIANT-LOCKED]=0A=
pcib3: <ACPI Host-PCI bridge> on acpi0=0A=
pci3: <ACPI PCI bus> on pcib3=0A=
pcib4: <ACPI Host-PCI bridge> on acpi0=0A=
pci6: <ACPI PCI bus> on pcib4=0A=
pci6: <base peripheral> at device 30.0 (no driver attached)=0A=
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0=0A=
atkbd0: <AT Keyboard> irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
atkbd0: [GIANT-LOCKED]=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: [GIANT-LOCKED]=0A=
psm0: model Generic PS/2 mouse, device ID 0=0A=
sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
sio0: type 16550A=0A=
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port =
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
acpi_cpu2: <CPU> on acpi0=0A=
device_probe_and_attach: acpi_cpu2 attach returned 6=0A=
orm0: <Option ROMs> at iomem =
0xee000-0xeffff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0=0A=
pmtimer0 on isa0=0A=
ppc0: parallel port not found.=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
sio1: port may not be enabled=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
Timecounters tick every 10.000 msec=0A=
acd0: CDROM <CD-224E> at ata0-master PIO4=0A=
da0 at ciss0 bus 0 target 0 lun 0=0A=
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device=0A=
da0: 135.168MB/s transfers=0A=
da0: 34726MB (71119755 512 byte sectors: 255H 63S/T 4427C)=0A=
SMP: AP CPU #1 Launched!=0A=
Mounting root from ufs:/dev/da0s1a=0A=
------=_NextPart_000_00C2_01C43D11.5A9BE100--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00c501c43d00$973c43e0$661da8c0>