Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 23 Sep 2000 17:12:19 +0100
From:      "Andy Chantrill" <andy@chantrill.freeserve.co.uk>
To:        <freebsd-isdn@freebsd.org>
Subject:   ISDN BT Speedway PCI (AVM Fritz!Card PnP)
Message-ID:  <008501c02579$0c9ead10$01010a0a@DEDICATIONINET.local>

next in thread | raw e-mail | index | archive | help
Hey Guys,

I'm trying to get my BT Speedway PCI ISDN T/A (a.k.a. AVM Fritz!Card PnP)
working under FreeBSD 4.0. I tried re-compiling the kernel with the
following block, but still no good ...

--
# ISDN BT Speedway (AVM Fritz!Card PnP).
#controller pnp0
options PNPBIOS
options AVM_PNP
device isic0 at isa? port ? net irq ? vector isicintr
--

Here's the system message buffer:

--
bash-2.03$ dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #1: Fri Sep 22 19:02:37 BST 2000
    root@dedication.drew:/usr/src/sys/compile/DEDICATION.DREW
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (74.70-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping = 5
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 41943040 (40960K bytes)
avail memory = 36823040 (35960K bytes)
Preloaded elf kernel "kernel" at 0xc03c4000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0xffa0-0xffaf at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xfc00-0xfcff mem 0xffbef800-0xffbef8ff
irq 10 at device 13.0 on pci0
dc0: Ethernet address: 00:a0:cc:64:c0:5b
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: supplying EUI64: 00:a0:cc:ff:fe:64:c0:5b
pci0: <unknown card> (vendor=0x1244, dev=0x0a00) at 14.0 irq 9
pci0: <S3 Trio graphics accelerator> at 15.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
unknown: <PNP0000> can't assign resources
unknown0: <PNP0201> at port
0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde,0x40b,0x410-0x43f,0x481-0x483,0x487,0x48
9-0x48c,0x4d6 drq 4 on isa0
unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown2: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0800> can't assign resources
unknown3: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown4: <PNP0c01> at iomem
0xe8000-0xfffff,0-0x9ffff,0x100000-0x27fffff,0xfffc0000-0xffffffff on isa0
unknown5: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown: <PNP0700> can't assign resources
unknown6: <PNP0400> at port 0x3bc-0x3bf irq 7 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown7: <PNP0c02> at port 0x78-0x79 on isa0
unknown8: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5
on isa0
unknown9: <Reserved> at port 0x100 on isa0
unknown10: <Game> at port 0x200-0x207 on isa0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 9541MB <Maxtor 51024U2> [19386/16/63] at ata0-master using PIO4
acd0: CDROM <FX400D> at ata1-master using PIO3
Mounting root from ufs:/dev/ad0s1a
dc0: starting DAD for fe80:0001::02a0:ccff:fe64:c05b
dc0: DAD complete for fe80:0001::02a0:ccff:fe64:c05b - no duplicates found
fd0c: hard error reading fsbn 0 (No status)
--

Can anyone point me in the direction of how to get this thing 'werkin?

Any help very much appreciated!


Thanks, Andy.



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?008501c02579$0c9ead10$01010a0a>