From owner-freebsd-scsi Wed Jul 21 7:30:55 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from db.geocrawler.com (db.gotocity.com [165.90.140.10]) by hub.freebsd.org (Postfix) with ESMTP id 16A1314DB1 for ; Wed, 21 Jul 1999 07:30:51 -0700 (PDT) (envelope-from nobody@db.geocrawler.com) Received: (from nobody@localhost) by db.geocrawler.com (8.8.8/8.8.8) id JAA13990; Wed, 21 Jul 1999 09:28:48 -0500 Date: Wed, 21 Jul 1999 09:28:48 -0500 Message-Id: <199907211428.JAA13990@db.geocrawler.com> To: freebsd-scsi@freebsd.org Subject: Eliant 820 tape problems From: "Geocrawler.com" Reply-To: "Carey Nairn" Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message was sent from Geocrawler.com by "Carey Nairn" Be sure to reply to that address. Hi all, just trying to use dump to backup a FreeBSD-3.1R system to an ExaByte Eliant 820 drive. this is what I get when I try to use dump on the command line: dump 0uBf 4585536 /dev/nrsa0 / DUMP: Date of this level 0 dump: Thu Jul 15 00:40:56 1999 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rwd0s1a (/) to /dev/nrsa0 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 21102 tape blocks on 0.00 tape(s). DUMP: dumping (Pass III) [directories] DUMP: dumping (Pass IV) [regular files] DUMP: write error 10120 blocks into volume 1 DUMP: Do you want to restart?: ("yes" or "no") I also get the following console messages: (sa0:aha0:0:4:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0 (sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,5 asc:10,0 (sa0:aha0:0:4:0): ID CRC or ECC error (sa0:aha0:0:4:0): WRITE(06). CDB: a 0 0 28 0 0 (sa0:aha0:0:4:0): Deferred Error: HARDWARE FAILURE info:2800 csi:0,0,0,1 asc:10,0 (sa0:aha0:0:4:0): ID CRC or ECC error (sa0:aha0:0:4:0): WRITE(06). CDB: a 0 0 28 0 0 (sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,1 asc:10,0 (sa0:aha0:0:4:0): ID CRC or ECC error (sa0:aha0:0:4:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 (sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,1 asc:10,0 (sa0:aha0:0:4:0): ID CRC or ECC error (sa0:aha0:0:4:0): failure at writing filemarks - opting for safety (sa0:aha0:0:4:0): REWIND. CDB: 1 0 0 0 0 0 (sa0:aha0:0:4:0): HARDWARE FAILURE csi:0,0,0,1 asc:10,0 (sa0:aha0:0:4:0): ID CRC or ECC error The SCSI system portion from dmesg is: aha0: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug Waiting 15 seconds for SCSI devices to settle sa0 at aha0 bus 0 target 4 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 3.300MB/s transfers changing root device to wd0s1a cd0 at aha0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [267400 x 2048 byte records] Any thought about why I can't write to the tape? cheers, Carey Nairn NB please reply to me at cpn@mailroom.dpac.tas.gov.au Geocrawler.com - The Knowledge Archive To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message