Date: Thu, 08 Feb 2007 23:05:42 +0100 From: Olivier Regnier <oregnier@steelbox.org> To: freebsd-acpi@freebsd.org Subject: without acpi not internet Message-ID: <45CB9EB6.7090604@steelbox.org>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------030805010404090108010500
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hello,
I have a Acer Aspire 3000 with Broadcom wifi card. Relevant output of
pciconf -v -l:
ndis0@pci0:11:0: class=0x028000 card=0x03121468 chip=0x431814e4 rev=0x02
hdr=0x00
vendor = 'Broadcom Corporation'
class = network
I have FreeBSD 6.2 and when i boot with ACPI disabled, i get an error
that says :
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
The result is simple, i can't connect to internet without ACPI. For more
information, you can see my dmesg files.
Can you help me please ?
Thank you.
--
Cheers,
Olivier Regnier
--------------030805010404090108010500
Content-Type: text/plain;
name="dmesg_without_acpi"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg_without_acpi"
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Thu Feb 8 21:29:09 UTC 2007
root@:/usr/src/sys/i386/compile/ZERO
MPTable: < >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Sempron(tm) Processor 2800+ (1600.06-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x10fc0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc2500800<SYSCALL,NX,MMX+,FFXSR,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
real memory = 468647936 (446 MB)
avail memory = 449159168 (428 MB)
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 760 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <simple comms, generic modem> at device 2.6 (no driver attached)
pcm0: <SiS 7012> port 0x1400-0x14ff,0x1c80-0x1cff irq 18 at device 2.7 on pci0
pcm0: <Avance Logic ALC203 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xe2002000-0xe2002fff irq 20 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe2003000-0xe2003fff irq 21 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe2004000-0xe2004fff irq 23 at device 3.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0: <SiS 900 10/100BaseTX> port 0x1800-0x18ff mem 0xe2005000-0xe2005fff irq 19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:c0:9f:a4:d2:f0
cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: unable to route slot 6 INTA
cbb: Unable to map IRQ...
device_attach: cbb0 attach returned 12
ndis0: <Broadcom 802.11g Network Adapter> mem 0xe2000000-0xe2001fff irq 17 at device 11.0 on pci0
ndis0: NDIS API version: 5.1
ndis0: Ethernet address: 00:0e:9b:d3:b5:7e
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd5fff,0xdc000-0xe3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1600062974 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100
acd0: DVDR <Slimtype DVDRW SOSW-833S/VRS2> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Slimtype DVDRW SOSW-833S VRS2> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a
--------------030805010404090108010500
Content-Type: text/plain;
name="dmesg_with_acpi"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg_with_acpi"
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Thu Feb 8 21:29:09 UTC 2007
root@:/usr/src/sys/i386/compile/ZERO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Sempron(tm) Processor 2800+ (1600.06-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x10fc0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc2500800<SYSCALL,NX,MMX+,FFXSR,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
real memory = 468647936 (446 MB)
avail memory = 449155072 (428 MB)
ACPI APIC Table: <PTLTD APIC >
ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
ACPI-0377: *** Info: Table [DSDT] replaced by host OS
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 760 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <simple comms, generic modem> at device 2.6 (no driver attached)
pcm0: <SiS 7012> port 0x1400-0x14ff,0x1c80-0x1cff irq 18 at device 2.7 on pci0
pcm0: <Avance Logic ALC203 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xe2002000-0xe2002fff irq 20 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe2003000-0xe2003fff irq 21 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe2004000-0xe2004fff irq 23 at device 3.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0: <SiS 900 10/100BaseTX> port 0x1800-0x18ff mem 0xe2005000-0xe2005fff irq 19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:c0:9f:a4:d2:f0
cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ndis0: <Broadcom 802.11g Network Adapter> mem 0xe2000000-0xe2001fff irq 17 at device 11.0 on pci0
ndis0: NDIS API version: 5.1
ndis0: Ethernet address: 00:0e:9b:d3:b5:7e
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd5fff,0xdc000-0xe3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1600062440 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100
acd0: DVDR <Slimtype DVDRW SOSW-833S/VRS2> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Slimtype DVDRW SOSW-833S VRS2> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a
--------------030805010404090108010500--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45CB9EB6.7090604>