Date: Fri, 20 Jan 2012 07:31:29 -0800 From: Jeremy Chadwick <freebsd@jdc.parodius.com> To: Dennis Glatting <freebsd@penx.com> Cc: freebsd-fs@freebsd.org Subject: Re: sanity check: is 9211-8i, on 8.3, with IT firmware still "the one" Message-ID: <20120120153129.GA97746@icarus.home.lan> In-Reply-To: <1327069331.29444.4.camel@btw.pki2.com> References: <alpine.BSF.2.00.1201191604510.19710@kozubik.com> <4F192ADA.5020903@brockmann-consult.de> <1327069331.29444.4.camel@btw.pki2.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jan 20, 2012 at 06:22:11AM -0800, Dennis Glatting wrote: > I am having a problem with Seagate ST1000DL002 disks but I haven't yet > determined weather it is the disks themselves (they -- two of them, new > -- fail under a MB controller too. Assuming the disks are seen directly on the bus (e.g. show up as daX, adaX, or whatever), please install ports/sysutils/smartmontools (make sure you're using version 5.42 or newer) and please provide output from the following command: "smartctl -a /dev/XXX" where XXX is the device name of the ST1000DL002 disk(s). Please be sure to state which device name is associated with which smartctl output. You can delete or remove the disk serial numbers from the output (for privacy) if you wish. I'll be happy to review the data and tell you whether or not the disks themselves are showing problems or if the issue is elsewhere. -- | Jeremy Chadwick jdc@parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, US | | Making life hard for others since 1977. PGP 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120120153129.GA97746>