Date: Sat, 3 Mar 2001 23:26:44 -0600 From: Bruce Burden <brucegb@realtime.net> To: freebsd-questions@freebsd.org Subject: Re: pointers for config flash mem card, please Message-ID: <20010303232644.A12125@tigerfish2.my.domain> In-Reply-To: <20010304123654.C1006@wantadilla.lemis.com>; from grog@lemis.com on Sun, Mar 04, 2001 at 12:36:54PM %2B1030 References: <20010303004805.A7366@tigerfish2.my.domain> <20010303172132.A11543@tigerfish2.my.domain> <20010304123654.C1006@wantadilla.lemis.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Mar 04, 2001 at 12:36:54PM +1030, Greg Lehey wrote:
>
> On Saturday, 3 March 2001 at 17:21:32 -0600, Bruce Burden wrote:
>
> > I have a Calluna flash memory card I am attempting to get
> > configured, and could use some help.
> >
> > First, the hardware:
> >
> > pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0xd3401000-0xd3401fff irq 19 at device 9.0 on pci0
> > pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0xd3402000-0xd3402fff irq 16 at device 9.1 on pci0
>
> This looks like an SMP motherboard. You should give more details.
>
I didn't include more details because I didn't deem it to be
pertinent. But, yes, it is a Abit BP6 mobo with 2x466 Celerons.
>
> > When I insert the card, this happens:
> >
> > /kernel: pccard: card inserted, slot 1
> > pccardd[58]: Card "Calluna"("CT130MC") [01Feb96] ['302-24 ] has function ID 4
> > pccardd[58]: Card "Calluna"("CT130MC") [01Feb96] ['302-24 ] has function ID 4
> > /kernel: ata4 at port 0x280-0x28f irq 10 slot 1 on pccard1
> > /kernel: ata4 at port 0x280-0x28f irq 10 slot 1 on pccard1
> > /kernel: ata4-master: ata_command: timeout waiting for intr
> > /kernel: ata4-master: ata_command: timeout waiting for intr
> > /kernel: ata4-master: identify failed
> > /kernel: ata4-master: identify failed
> > pccardd[58]: ata4: GENERIC Flash ATA / ATA HDD inserted.
> > pccardd[58]: ata4: GENERIC Flash ATA / ATA HDD inserted.
>
> haven't said what your hardware is, nor what your software is. But at
>
Okay, my bad wrt software. It is 4.2-STABLE, downloaded 13 Jan.
or so.
>
> the moment your biggest problem seems to be the SMP board.
>
Perhaps. The card would seem to work in slot1. If it is inserted
in slot0, it causes things to lock up until it is removed. Okay, fine,
I can live with that.
Bottom line is that this is pretty much exactly what I would
expect to see, based on your response to a very similiar question.
Aside from the fact that everything is in duplicate, of course.
Where I need a pointer is here in getting the thing mounted. I
have done a MAKEDEV ads1, it is in /dev, I have ata and atadisk
defined in the conf file, yet I am getting:
bash-2.04# mount /flash
msdos: /dev/ad8s1: Device not configured
>
> > If it matters, this card is from an Agfa ActionCam (Minolta
> > RD-175 digital camera) with a stated capacity of 130MB.
>
> There's a good chance that you'll run into problems there too, though
> my description to which you refer above might help. But first we need
> to see whether your hardware can work together.
>
Probably. I will worry about that when I actually get the disk
mounted.
Bruce
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010303232644.A12125>