Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 11 Nov 2002 19:49:58 +0100
From:      Udo Erdelhoff <ue@nathan.ruhr.de>
To:        freebsd-sparc@FreeBSD.ORG
Subject:   Re: Successfull boot on Enterprise 4500
Message-ID:  <20021111184958.GC59222@nathan.ruhr.de>
In-Reply-To: <20021108204036.GD316@crow.dom2ip.de>
References:  <20021108201139.GW59222@nathan.ruhr.de> <20021108204036.GD316@crow.dom2ip.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
On Fri, Nov 08, 2002 at 09:40:36PM +0100, Thomas Moestl wrote:
> > Is there any SBUS SCSI card for a E4500 that is supported by FreeBSD?
> 
> I believe that mjacob got SBus isp cards to work.

looks like it:

8-slot Sun Enterprise E4500/E5500, No Keyboard
OpenBoot 3.2.29, 4096 MB memory installed, Serial #51301245.
Copyright 2001 Sun Microsystems, Inc.  All rights reserved
Ethernet address 0:3:ba:e:cb:7d, Host ID: 830ecb7d.

{0} ok boot cdrom
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f  File and args:

>> FreeBSD/sparc64 boot block
   Boot path:   /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f
   Boot loader: /boot/loader
Console: OpenFirmware console
disk0 is /sbus@3,0/SUNW,fas@3,8800000/sd@6

FreeBSD/sparc64 bootstrap loader, Revision 1.0
(jake@u60.locore.ca, Thu Oct 31 17:06:29 GMT 2002)
bootpath="/sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f"
loaddev=disk0s0a:
Loading /boot/defaults/loader.conf 
/boot/kernel/kernel data=0x330d08+0x127638 syms=[0x8+0x484c8+0x8+0x38bd5]

Hit [Enter] to boot immediately, or any other key for command prompt.
OK boot -v
[...]
sbus1: <SUNW,fas>, type scsi (no driver attached)
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7
isp0 mem 0x10000-0x1044f irq 195 on sbus1
isp0: Differential Mode
isp0: Ultra Mode Capable
isp0: Board Type 1020A, Chip Revision 0x0, loaded F/W Revision 1.37.0
isp0: Last F/W revision was 1.24.0
isp0: 882 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0

I did not have enough spare time today to drag a RAID with a diff
controller out of storage and see if the box will recognize the
disks connected to the controller.

> Thanks for testing!

Still need to re-check the 450 (panic'ed with the June snapshot) and
I just heard that there is a cold standby 3500 where I can test-boot.

/s/Udo
-- 
I have the heart of an innocent child -- in a small jar on my desk

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021111184958.GC59222>