Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 15 Mar 2012 09:04:23 +0700
From:      "nyoman.bogi@gmail.com" <nyoman.bogi@gmail.com>
To:        Kevin Oberman <kob6558@gmail.com>
Cc:        freebsd-net@freebsd.org
Subject:   Re: firewall stuck
Message-ID:  <CAJsxnXaXG_9UV-MTeij=PSY4e0abKbmqW6QMWMph9UUTTCNMRg@mail.gmail.com>
In-Reply-To: <CAN6yY1v1O9QiN3bAZ3jPJvzX=xsLAauSXJJjwhrZPYSnBfK_uw@mail.gmail.com>
References:  <CAJsxnXY7aHNf7dvG%2BQLVqziWQe8HLHbFbttN-vNsai-MbOVCMA@mail.gmail.com> <CAN6yY1v1O9QiN3bAZ3jPJvzX=xsLAauSXJJjwhrZPYSnBfK_uw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
thanks Kevin,
this is my "ipfw show" :

00100  4352617  2413620288 allow ip from any to any via lo0
00200        0           0 deny ip from any to 127.0.0.0/8
00300        0           0 deny ip from 127.0.0.0/8 to any
00400        0           0 deny ip from any to ::1
00500        0           0 deny ip from ::1 to any
00600    54387     5454184 allow icmp from any to any
00700  3142231  1681082246 allow ip from 10.1.1.28 to 10.1.1.0/26
00800  4659459  4478397111 allow ip from 10.1.1.0/26 to 10.1.1.28
00900        0           0 check-state
01000   137997    89083135 allow tcp from 10.1.1.28 to any setup keep-state
01100        0           0 allow tcp from 10.16.10.84 to any setup
keep-state
01150   401205   276677828 allow tcp from any to 10.1.1.28 dst-port 22
setup keep-state
01200   245718    44249729 allow udp from 10.1.1.28 to any keep-state
01300  5876930   239194755 allow tcp from any to any established
01400        0           0 allow tcp from any to 10.1.1.28 dst-port 389
setup keep-state
01500 26341187 22030370786 allow tcp from any to 10.1.1.28 dst-port 80
setup keep-state
01600    80945    61013964 allow tcp from any to 10.1.1.28 dst-port 443
setup keep-state
01700        0           0 allow tcp from 10.1.1.2 to 10.1.1.28 dst-port 22
setup keep-state
01800   149642    97939477 allow tcp from any to 10.1.1.28 dst-port 25
setup keep-state
01900      140        7501 allow tcp from 10.1.0.0/16 to 10.1.1.28 dst-port
110 setup keep-state
02000  1677982    89212845 allow tcp from any to 10.1.1.28 dst-port 110
setup keep-state
02100     8996      432096 deny tcp from any to any setup
02200   244111    24117256 allow udp from any to 10.1.1.28 dst-port 53
keep-state
02300        0           0 allow udp from any to 10.1.1.12 dst-port 53
keep-state
65535     4610     1422974 deny ip from any to any

I use FreeBSD 8.2 :
FreeBSD 8.2-RELEASE (GENERIC) #0: Fri Feb 18 02:24:46 UTC 2011

the problem start after I add rule 01150

On Wed, Mar 14, 2012 at 1:12 PM, Kevin Oberman <kob6558@gmail.com> wrote:

> On Tue, Mar 13, 2012 at 7:27 PM, nyoman.bogi@gmail.com
> <nyoman.bogi@gmail.com> wrote:
> > dear guru,
> >
> > every time I open my firewall to allow SSH connection from Internet
> > after few days my firewall always stuck. Stuck in here meaning
> > that it deny all request (deny any from any).
> > And after I "ipfw disable firewall" and then "ipfw enable firewall"
> > everything works fine
> >
> > when I checked /var/log/messages I found lots of attempts
> > people try to connect to my machine.
> > why my machine get stuck when lots of people try to SSH to my machine?
>
> We need a bit more information, especially your ipfw configuration. Is
> it a statefull firewall? It sounds a lot like your state table might
> be filling for some reason. Of course, if it is not a statefull
> firewall, that idea is probably wrong, though it could be a
> misconfiguration of some statefull rule that is inadvertently catching
> the SSH attempts.
>
> Have you done an 'ipfw show' to see what rules are being matched? it
> may or may not provide a clue.
> --
> R. Kevin Oberman, Network Engineer
> E-mail: kob6558@gmail.com
>



-- 
-------------------------------
Bogi Aditya
Sisfo - IMTelkom
http://bogi.blog.imtelkom.ac.id



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJsxnXaXG_9UV-MTeij=PSY4e0abKbmqW6QMWMph9UUTTCNMRg>