Date: Tue, 14 Jun 2016 17:57:00 +0100 From: Andrew Turner <andrew@fubar.geek.nz> To: Guy Yur <guyyur@gmail.com> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: ODROID C1+ doesn't finish booting on 11-CURRENT after r301062 Message-ID: <20160614175700.19bdf896@zapp> In-Reply-To: <CAC67Hz83J7HiGjALp9d-m0piq1k9ZF%2Ba6iqxz98MVD7RT-h9og@mail.gmail.com> References: <CAC67Hz83J7HiGjALp9d-m0piq1k9ZF%2Ba6iqxz98MVD7RT-h9og@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This should be fixed in r301890.
Andrew
On Sat, 11 Jun 2016 15:56:09 +0300
Guy Yur <guyyur@gmail.com> wrote:
> Hi,
>
> My ODROID C1+ gets stuck during boot starting with r301062
> (still gets stuck with r301778).
>
> Sometimes there are continuous prints of
> "mmcsd0: Error indicated: 1 Timeout".
> When there are no mmcsd timeouts, it still doesn't get to
> the login prompt with last print being the NIC bringup.
>
> Adding the bellow print code to gic_bind() mask loop,
> I see arm_gic_map[cpu] is 0 when setting one of the IRQs.
>
> for (mask = 0, cpu = 0; cpu < end; cpu++)
> if (CPU_ISSET(cpu, cpus)) {
> mask |= arm_gic_map[cpu];
> if (arm_gic_map[cpu] != 1 << cpu)
> device_printf(sc->gic_dev,
> "irq = %u, cpu = %u, arm_gic_map[cpu] = 0x%08x\n",
> irq, cpu, arm_gic_map[cpu]);
> }
>
> # dmesg | grep -B1 arm_gic_map
> Release APs
> gic0: irq = 32, cpu = 1, arm_gic_map[cpu] = 0x00000000
>
> # dmesg | grep -B1 arm_gic_map
> Release APs
> gic0: irq = 35, cpu = 2, arm_gic_map[cpu] = 0x00000000
>
>
> If I add prints to the end of gic_bind() the board boots fine.
> (Probably because of the delay added by the prints)
>
> Example:
> device_printf(sc->gic_dev, "irq = %u, mask = 0x%08x\n", irq, mask);
> return (0);
>
> # dmesg | grep -e "gic0: pn" -e "gic0: irq" -e "Release APs"
> gic0: pn 0x390, arch 0x1, rev 0x1, implementer 0x43b irqs 256
> gic0: irq = 32, mask = 0x00000001
> gic0: irq = 42, mask = 0x00000001
> gic0: irq = 122, mask = 0x00000001
> gic0: irq = 58, mask = 0x00000001
> gic0: irq = 107, mask = 0x00000001
> gic0: irq = 125, mask = 0x00000001
> gic0: irq = 60, mask = 0x00000001
> gic0: irq = 110, mask = 0x00000001
> gic0: irq = 62, mask = 0x00000001
> gic0: irq = 63, mask = 0x00000001
> gic0: irq = 40, mask = 0x00000001
> gic0: irq = 35, mask = 0x00000001
> Release APs
> gic0: irq = 32, mask = 0x00000002
> gic0: irq = 35, mask = 0x00000004
> gic0: irq = 40, mask = 0x00000008
> gic0: irq = 42, mask = 0x00000001
> gic0: irq = 58, mask = 0x00000002
> gic0: irq = 60, mask = 0x00000004
> gic0: irq = 62, mask = 0x00000008
> gic0: irq = 63, mask = 0x00000001
> gic0: irq = 107, mask = 0x00000002
> gic0: irq = 110, mask = 0x00000004
> gic0: irq = 122, mask = 0x00000008
> gic0: irq = 125, mask = 0x00000001
>
>
> Thanks,
> Guy
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160614175700.19bdf896>