Date: Mon, 21 Mar 2016 12:05:27 +0100 From: Tijl Coosemans <tijl@FreeBSD.org> To: Matthias Apitz <guru@unixarea.de> Cc: freebsd-questions@freebsd.org Subject: Re: USB printer && ulpt.ko Message-ID: <20160321120527.57b0b5ae@kalimero.tijl.coosemans.org> In-Reply-To: <20160321110101.GA3645@c720-r292778-amd64> References: <20160320161350.GA3782@freeyaz> <74efb895-6e15-49a0-9a70-46b0c8b958e1@unixarea.de> <20160320165642.GB3782@freeyaz> <20160320185359.GA2632@c720-r292778-amd64> <20160320192407.GA2900@c720-r292778-amd64> <20160320194423.GC3782@freeyaz> <20160321110101.GA3645@c720-r292778-amd64>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 21 Mar 2016 12:01:01 +0100 Matthias Apitz <guru@unixarea.de> wrote: > The pkg message of the pkh hplip says: > > $ pkg info --pkg-message hplip-3.14.10_1 > hplip-3.14.10_1: > Always: > ===================================================================== > > HPLIP expects printers to be attached as a ugen(4) devices. This > means that you must NOT have "device ulpt" in your kernel and ulpt > must NOT be loaded as a kernel module (you may also want to compile > ... > > and I do not have compiled in the device and not lodaded at boot: > > # kldload ulpt > # > > i.e. I could load it fine which shows that ulpt is not loaded. > > It seems that on device attach the devd fires up the loading of it: > > # tail /var/log/messages > Mar 20 20:21:00 freeyaz kernel: ugen0.3: <HP> at usbus0 > Mar 20 20:21:00 freeyaz root: Unknown USB device: vendor 0x03f0 product 0xac11 bus uhub0 > Mar 20 20:21:00 freeyaz kernel: ulpt0: <HP Deskjet 2510 series, class 0/0, rev 2.00/1.00, addr 3> on usbus0 > Mar 20 20:21:00 freeyaz kernel: ulpt0: using bi-directional mode > ... > > How is the correct way to avoid this loading via /etc/devd/usb.conf? The pkg-message should be removed. It's no longer relevant. It's ok if ulpt is loaded.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160321120527.57b0b5ae>