From owner-freebsd-scsi Mon Feb 11 13:30:19 2002 Delivered-To: freebsd-scsi@freebsd.org Received: from sax.sax.de (sax.sax.de [193.175.26.33]) by hub.freebsd.org (Postfix) with ESMTP id C6CA837B419 for ; Mon, 11 Feb 2002 13:30:09 -0800 (PST) Received: (from uucp@localhost) by sax.sax.de (8.9.3/8.9.3) with UUCP id WAA24600; Mon, 11 Feb 2002 22:30:08 +0100 (CET) Received: (from j@localhost) by uriah.heep.sax.de (8.11.6/8.11.6) id g1BLPQN61061; Mon, 11 Feb 2002 22:25:26 +0100 (MET) (envelope-from j) Date: Mon, 11 Feb 2002 22:25:26 +0100 (MET) Message-Id: <200202112125.g1BLPQN61061@uriah.heep.sax.de> Mime-Version: 1.0 X-Newsreader: knews 1.0b.1 Reply-To: joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) Organization: Private BSD site, Dresden X-Phone: +49-351-2012 669 X-PGP-Fingerprint: DC 47 E6 E4 FF A6 E9 8F 93 21 E0 7D F9 12 D6 4E References: <20020211170640.C245@ision.net> <20020210215543.P1982-100000@gerard> In-Reply-To: <20020210215543.P1982-100000@gerard> From: j@uriah.heep.sax.de (Joerg Wunsch) Subject: Re: SCSI parity error detected X-Original-Newsgroups: local.freebsd.scsi To: freebsd-scsi@freebsd.org Cc: Frank Altpeter Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Gérard Roudier wrote: > OTOH, the offending devices exhibit some *SUN* proprietary > firmware. Given that SUN guys are known to be great reinventors of > the wheel, we may suspect these devices to have some questionnable > behaviour. Ah no. AFAICT, all that Sun's doing here is addings their "SUNxxG" to the vendor string so their tools can quickly identify and categorize their disks. I'm using a at scbus0 target 0 lun 0 (pass0,da0) (also SCA, but sitting behind a Tekram 53c895 40 MHz LVD bus) here, and it works just great. > If we suppose that SUN guys didn't break SCSI too much here (??), > the problem may be due to your SCA-to-SCSI2 tinking machines not > connecting and/or terminating all signals as needed for WIDE SCSI. Since i was the guy advising him to ask here, i'm now already familiar with Frank's setup. ;-) He originally used a plain 8-bit configuration, his "SCA-to-SCSI2" should rather read as "SCA to 8-bit 50-pin" adapter. So there's no wide negotiation involved at all. Certainly those adapters don't terminate anything, but the disks should never enter wide mode anyway. Following my advise he changed the old configuration from using the CD-ROM's internal (passive) termination to an active plug-in terminator, which didn't help. This Dawicontrol is 8-bit only btw., despite of using an 53c875. -- cheers, J"org .-.-. --... ...-- -.. . DL8DTL http://www.sax.de/~joerg/ NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message