Date: Sun, 8 Feb 1998 23:56:15 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: Phil Hall <phall@enterprise.america.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 2.2.5 not recognizing sd1 at installation time Message-ID: <Pine.BSF.3.96.980208235550.24904T-100000@gdi.uoregon.edu> In-Reply-To: <m0y1Qer-001rwzC@enterprise>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 8 Feb 1998, Phil Hall wrote: > > I am trying to install FreeBSD 2.2.5 on my second scsi drive. > I am using a tyan 1571 with an adaptec 2940uw. > the system has an ide drive 2 scsi drives and a scsi > cdrom. > I boot using the installation floppy, go through the process of removing any > conflicts. > I select custom installation, partition the drive. > At this point, FreeBSD displays only the ide drive and > the first scsi drive, wd0 and sd0. > both of the scsi drives are narrow, sd0 on the internal 50pin > connector, and sd1 on the 68pin external. > the adaptec recognizes both drives. > I have tried unplugging the power to the first drive, but freebsd still > doesn't see the second one. > I am using active terminators on both ends of the scsi chain, and I have > set termination to low off, high on in the 2940uw bios. Hit <scroll lock> at the main menu, then use the arrow keys to scroll up and see if your wide chain is detected. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980208235550.24904T-100000>