Date: Sat, 30 Aug 2003 13:42:39 +0930 From: Kim Needham <kimn@chariot.net.au> To: freebsd-questions@freebsd.org Subject: Laptop Problems Message-ID: <20030830134239.2867a779.kimn@chariot.net.au>
next in thread | raw e-mail | index | archive | help
I recently got a new Asus laptop. I went to place FreeBSD 4.8 on it, but it kept hanging on detecting the HDD. So I tried 5.1 instead which installed fine. I have run into several problems with the hardware. The first is that the 3 Com Gigabit card (from the 3com site it looks like a 3C2000-T) is not being detected. I can not find anything in the kernel config that will help with the detection. So the first question is what can I do so that it can be detected and setup? The second problem has been with trying to get X started. When I started X, all I end up with is a blank screen and no response. Ctl-Alt-Backspace does terminated it, but there is still no display. I am now at a stage of being uncertain where to continue from here since the XFree logs are not as helpful as I had hoped. So does anyone have any good suggestions on what I could try to get either or both to work? Thanks in advance Kim Some information on the PC: (let me know if you need any more information) The kernel is currently a generic one with the radeondrm device compiled in. Output from dmesg ----------------- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Sat Aug 30 09:58:14 CST 2003 root@laptop:/usr/src/sys/i386/compile/LAPTOP Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ea000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06ea244. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2666778568 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2666.78-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536846336 (511 MB) avail memory = 513966080 (490 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS L5C > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00f1be0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 648 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0xd800-0xd8ff mem 0xe7800000-0xe780ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe8000000 64MB info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 fwohci0: vendor=1039, dev=7007 fwohci0: <1394 Open Host Controller Interface> mem 0xe7000000-0xe7000fff irq 11 at device 2.3 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:03:0c:8a:e7 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:0c:8a:e7 sbp0: <SBP2/SCSI over firewire> on firewire0 fwohci0: Initiate bus reset atapci0: <SiS 96X UDMA133 controller> port 0xb800-0xb80f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <simple comms> at device 2.6 (no driver attached) pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 5 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 5 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xe5800000-0xe5800fff irq 5 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <memory, flash> at device 10.2 (no driver attached) pci0: <network> at device 12.0 (no driver attached) pci0: <network, ethernet> at device 13.0 (no driver attached) sio0 port 0x2f8-0x2ff irq 3 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio1 port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acpi_cpu: throttling enabled, 4 steps (100% to 25.0%), currently 100.0% ad2: 57231MB <IC25N060ATMR04-0> [116280/16/63] at ata1-master UDMA100 acd0: DVD-R <TOSHIBA DVD-ROM SD-R6112> at ata0-master PIO4 Tail of the XFree Log: ---------------------- (II) RADEON(0): Memory manager initialized to (0,0) (1280,8191) (II) RADEON(0): Reserved area from (0,1024) to (1280,1026) (II) RADEON(0): Largest offscreen area available: 1280 x 7165 (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Scanline Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (II) RADEON(0): Acceleration enabled (==) RADEON(0): Backing store disabled (==) RADEON(0): Silken mouse enabled (II) RADEON(0): Using hardware cursor (scanline 1026) (II) RADEON(0): Largest offscreen area available: 1280 x 7152 (II) RADEON(0): Direct rendering disabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "SysMouse" (**) Mouse1: Protocol: "SysMouse" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/sysmouse" (**) Option "BaudRate" "1200" (**) Option "StopBits" "2" (**) Option "DataBits" "8" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "0" (**) Option "FlowControl" "None" (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse1: Buttons: 3 (**) Mouse1: BaudRate: 1200 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) AUDIT: Sat Aug 30 13:26:53 2003: 967 XFree86: client 5 rejected from local host (==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear Output from PCISCAN: -------------------- pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1039 device 0x0648 Silicon Integrated Systems [SiS] Device unknown pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1039 device 0x0001 Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP) pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x1039 device 0x0008 Silicon Integrated Systems [SiS] 85C503/5513 pci bus 0x0000 cardnum 0x02 function 0x03: vendor 0x1039 device 0x7007 Silicon Integrated Systems [SiS] FireWire Controller pci bus 0x0000 cardnum 0x02 function 0x05: vendor 0x1039 device 0x5513 Silicon Integrated Systems [SiS] 5513 [IDE] pci bus 0x0000 cardnum 0x02 function 0x06: vendor 0x1039 device 0x7013 Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] pci bus 0x0000 cardnum 0x02 function 0x07: vendor 0x1039 device 0x7012 Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator pci bus 0x0000 cardnum 0x03 function 0x00: vendor 0x1039 device 0x7001 Silicon Integrated Systems [SiS] SiS7001 USB Controller pci bus 0x0000 cardnum 0x03 function 0x01: vendor 0x1039 device 0x7001 Silicon Integrated Systems [SiS] SiS7001 USB Controller pci bus 0x0000 cardnum 0x03 function 0x02: vendor 0x1039 device 0x7001 Silicon Integrated Systems [SiS] SiS7001 USB Controller pci bus 0x0000 cardnum 0x03 function 0x03: vendor 0x1039 device 0x7002 Silicon Integrated Systems [SiS] SiS7002 USB 2.0 pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x1524 device 0x1421 ENE Technology Inc Device unknown pci bus 0x0000 cardnum 0x0a function 0x01: vendor 0x1524 device 0x1421 ENE Technology Inc Device unknown pci bus 0x0000 cardnum 0x0a function 0x02: vendor 0x1524 device 0x0510 ENE Technology Inc Device unknown pci bus 0x0000 cardnum 0x0c function 0x00: vendor 0x14e4 device 0x4301 Broadcom Corporation BCM4301 802.11b pci bus 0x0000 cardnum 0x0d function 0x00: vendor 0x10b7 device 0x1700 3Com Corporation Device unknown pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x4c66 ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030830134239.2867a779.kimn>