Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 28 Feb 2012 05:23:29 +0000 (UTC)
From:      Pyun YongHyeon <yongari@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r232246 - in head/sys/dev: mii re
Message-ID:  <201202280523.q1S5NTak053424@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: yongari
Date: Tue Feb 28 05:23:29 2012
New Revision: 232246
URL: http://svn.freebsd.org/changeset/base/232246

Log:
  Prefer RL_GMEDIASTAT register to RGEPHY_MII_SSR register to
  extract a link status of PHY when parent driver is re(4).
  RGEPHY_MII_SSR register does not seem to report correct PHY status
  on some integrated PHYs used with re(4).
  Unfortunately, RealTek PHYs have no additional information to
  differentiate integrated PHYs from external ones so relying on PHY
  model number is not enough to know that.  However, it seems
  RGEPHY_MII_SSR register exists for external RealTek PHYs so
  checking parent driver would be good indication to know which PHY
  was used. In other words, for non-re(4) controllers, the PHY is
  external one and its revision number is greater than or equal to 2.
  This change fixes intermittent link UP/DOWN messages reported on
  RTL8169 controller.
  
  Also, mii_attach(9) is tried after setting interface name since
  rgephy(4) have to know parent driver name.
  
  PR:	kern/165509

Modified:
  head/sys/dev/mii/rgephy.c
  head/sys/dev/re/if_re.c

Modified: head/sys/dev/mii/rgephy.c
==============================================================================
--- head/sys/dev/mii/rgephy.c	Tue Feb 28 04:06:42 2012	(r232245)
+++ head/sys/dev/mii/rgephy.c	Tue Feb 28 05:23:29 2012	(r232246)
@@ -110,10 +110,15 @@ static int
 rgephy_attach(device_t dev)
 {
 	struct mii_softc *sc;
+	struct mii_attach_args *ma;
+	u_int flags;
 
 	sc = device_get_softc(dev);
-
-	mii_phy_dev_attach(dev, 0, &rgephy_funcs, 0);
+	ma = device_get_ivars(dev);
+	flags = 0;
+	if (strcmp(ma->mii_data->mii_ifp->if_dname, "re") == 0)
+		flags |= MIIF_PHYPRIV0;
+	mii_phy_dev_attach(dev, flags, &rgephy_funcs, 0);
 
 	/* RTL8169S do not report auto-sense; add manually. */
 	sc->mii_capabilities = (PHY_READ(sc, MII_BMSR) | BMSR_ANEG) &
@@ -243,7 +248,8 @@ setit:
 		 * Check to see if we have link.  If we do, we don't
 		 * need to restart the autonegotiation process.
 		 */
-		if (sc->mii_mpd_rev >= 2) {
+		if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 &&
+		    sc->mii_mpd_rev >= 2) {
 			/* RTL8211B(L) */
 			reg = PHY_READ(sc, RGEPHY_MII_SSR);
 			if (reg & RGEPHY_SSR_LINK) {
@@ -298,7 +304,7 @@ rgephy_status(struct mii_softc *sc)
 	mii->mii_media_status = IFM_AVALID;
 	mii->mii_media_active = IFM_ETHER;
 
-	if (sc->mii_mpd_rev >= 2) {
+	if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 && sc->mii_mpd_rev >= 2) {
 		ssr = PHY_READ(sc, RGEPHY_MII_SSR);
 		if (ssr & RGEPHY_SSR_LINK)
 			mii->mii_media_status |= IFM_ACTIVE;
@@ -328,7 +334,7 @@ rgephy_status(struct mii_softc *sc)
 		}
 	}
 
-	if (sc->mii_mpd_rev >= 2) {
+	if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 && sc->mii_mpd_rev >= 2) {
 		ssr = PHY_READ(sc, RGEPHY_MII_SSR);
 		switch (ssr & RGEPHY_SSR_SPD_MASK) {
 		case RGEPHY_SSR_S1000:
@@ -484,7 +490,7 @@ rgephy_reset(struct mii_softc *sc)
 {
 	uint16_t ssr;
 
-	if (sc->mii_mpd_rev == 3) {
+	if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 && sc->mii_mpd_rev == 3) {
 		/* RTL8211C(L) */
 		ssr = PHY_READ(sc, RGEPHY_MII_SSR);
 		if ((ssr & RGEPHY_SSR_ALDPS) != 0) {

Modified: head/sys/dev/re/if_re.c
==============================================================================
--- head/sys/dev/re/if_re.c	Tue Feb 28 04:06:42 2012	(r232245)
+++ head/sys/dev/re/if_re.c	Tue Feb 28 05:23:29 2012	(r232246)
@@ -1577,19 +1577,6 @@ re_attach(device_t dev)
 		re_gmii_writereg(dev, 1, 0x0e, 0);
 	}
 
-#define	RE_PHYAD_INTERNAL	 0
-
-	/* Do MII setup. */
-	phy = RE_PHYAD_INTERNAL;
-	if (sc->rl_type == RL_8169)
-		phy = 1;
-	error = mii_attach(dev, &sc->rl_miibus, ifp, re_ifmedia_upd,
-	    re_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, MIIF_DOPAUSE);
-	if (error != 0) {
-		device_printf(dev, "attaching PHYs failed\n");
-		goto fail;
-	}
-
 	ifp->if_softc = sc;
 	if_initname(ifp, device_get_name(dev), device_get_unit(dev));
 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
@@ -1614,6 +1601,19 @@ re_attach(device_t dev)
 
 	TASK_INIT(&sc->rl_inttask, 0, re_int_task, sc);
 
+#define	RE_PHYAD_INTERNAL	 0
+
+	/* Do MII setup. */
+	phy = RE_PHYAD_INTERNAL;
+	if (sc->rl_type == RL_8169)
+		phy = 1;
+	error = mii_attach(dev, &sc->rl_miibus, ifp, re_ifmedia_upd,
+	    re_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, MIIF_DOPAUSE);
+	if (error != 0) {
+		device_printf(dev, "attaching PHYs failed\n");
+		goto fail;
+	}
+
 	/*
 	 * Call MI attach routine.
 	 */



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202280523.q1S5NTak053424>