Date: Fri, 14 Jun 2013 11:33:02 +0200 From: Hans Petter Selasky <hps@bitfrost.no> To: Vitalij Satanivskij <satan@ukr.net> Cc: current@freebsd.org Subject: Re: USB Keyboard not worked on current (r251681) Message-ID: <51BAE34E.3090209@bitfrost.no> In-Reply-To: <20130614085022.GA75871@hell.ukr.net> References: <20130614085022.GA75871@hell.ukr.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 06/14/13 10:50, Vitalij Satanivskij wrote: > Hello > > There is system - > > CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2400.05-MHz K8-class CPU) > real memory = 137438953472 (131072 MB) > avail memory = 132517056512 (126378 MB) > > motherboard - X9DR3-F > > Keyboard is > > Logitech, identified as > > ugen1.2: <LITEON Technology> at usbus1 > ukbd0: <LITEON Technology USB Multimedia Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus1 > kbd2 at ukbd0 > kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 > > > Messages from dmesg (with "-v" in boot.conf ) > > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Jan 1 03:21:31 fmst-test kernel: Root mount waiting for: usbus1 usbus0 > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test last message repeated 4 times > Jan 1 03:21:31 fmst-test kernel: Root mount waiting for: usbus1 usbus0 > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test last message repeated 8 times > > and at the end - > > Jan 1 03:21:31 fmst-test last message repeated 2 times > Jan 1 03:21:31 fmst-test kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Jan 1 03:21:31 fmst-test kernel: ugen0.2: <Unknown> at usbus0 (disconnected) > Jan 1 03:21:31 fmst-test kernel: uhub_reattach_port: could not allocate new device > Jan 1 03:21:31 fmst-test kernel: usbd_ctrl_transfer_setup: could not setup default USB transfer > Jan 1 03:21:31 fmst-test kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM > Jan 1 03:21:31 fmst-test kernel: ugen1.2: <Unknown> at usbus1 (disconnected) > Jan 1 03:21:31 fmst-test kernel: uhub_reattach_port: could not allocate new device > > > > I see thread's about same problem early, but patch alredy in head and no changes. > > What and how can i debug to see where is problem? Hi, Search for similar thread on -current mailing list. This is a known issue. Thank you. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51BAE34E.3090209>