Date: Sat, 05 Apr 2003 21:52:57 -0500 From: "E. J. Cerejo" <ej.cerejo@laposte.net> To: Benedict Plante <erythro73@SexMagnet.com> Cc: freebsd-questions@freebsd.org Subject: Re: PPPoE : User can't access while root can! Message-ID: <3E8F9689.302@laposte.net> References: <20030405153843.10d7c6d7.erythro73@SexMagnet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
You need to edit /etc/group file and make every user member of the network group I believe. The line that you looking for on this file should look like this: network:*:69:root,webdude,webdude2,webdude3 separate user by commons and no spaces. Benedict Plante wrote: > Hello all! > Well, let get straight to the point. I use Bell Canada Sympatico Internet Service Provider, with a DSL connection, and I'm using FreeBSD-4.8-release. > > I've used FreeBSD-4.7 for a while, and sometime, when I installed, ppp wasn't working for user... unless one time, when I completely wipe my FreeBSD-4.7 partition and reinstalling it, it worked. Later, I deinstalled it and reinstalled it completely and it wasn't working. > > Now, I've move to FreeBSD-4.8-release and its still not working! I mean... it does work as root but not as a user. > > If I use internet with a user from the wheel group, it gives me that message: > > $ ping www.google.ca > ping: cannot resolve www.google.ca: Host name lookup failure > > In order to make my connection work, I need to configure my /etc/ppp/ppp.conf along with rp-pppoe-3.5. > > -----Here is my /etc/ppp/ppp.conf: > > default: > set log Phase tun command > set ifaddr 10.0.0.1/0 10.0.0.2/0 > > sympatico.ca: > set device PPPoE:vr0 > set authname * > set authkey * > set dial > set login > add default HISADDR > > > > -----Here is my /etc/rc.conf: > > hostname="FreeBSD" > kern_securelevel_enable="NO" > linux_enable="YES" > moused_enable="YES" > moused_port="/dev/psm0" > moused_type="auto" > nfs_reserved_port_only="YES" > sendmail_enable="YES" > sshd_enable="YES" > usbd_enable="YES" > ppp_enable="YES" > ppp_mode="ddial" > ppp_profile="sympatico.ca" > ppp_nat="YES" #I tried with it turned to "NO" also > inetd_enable="YES" > > > -----Here is my /var/log/ppp.log: > > 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "62031100098933-") > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SESSIONID > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SUCCESS > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: carrier -> login > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: login -> lcp > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492 > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: bundle: Authenticate > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: his = PAP, mine = none > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Pap Output: *** ******** > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: Pap Input: SUCCESS () > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: lcp -> open > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: bundle: Network > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP ! > Apr 5 15:25:06 FreeBSD last message repeated 5 times > > > > > > -----My ifconfig as root (working) > FreeBSD# ifconfig > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1 > ether 00:50:ba:e5:bd:b0 > media: Ethernet autoselect (10baseT/UTP) > status: active > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > inet 127.0.0.1 netmask 0xff000000 > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 > inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff > Opened by PID 53 > > > > -----My ifconfig as user (wheel): > > $ ifconfig > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1 > ether 00:50:ba:e5:bd:b0 > media: Ethernet autoselect (10baseT/UTP) > status: active > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > inet 127.0.0.1 netmask 0xff000000 > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 > inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff > Opened by PID 53 > > > > > ----- Do you need some more info??? Thank you to all the people who will help me :). > > Erythro73 > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E8F9689.302>