Date: Thu, 14 Sep 1995 17:00:43 +0200 (MET DST) From: rene@freeze.iaf.nl (Rene de Vries) To: freebsd-hackers@freebsd.org Cc: bulte@jgo.enet.dec.com (Wilko Bulte) Subject: PPP problems connection to a Windows-NT server Message-ID: <m0stFmP-0007OfC@freeze>
next in thread | raw e-mail | index | archive | help
Hi to all of you!
I know this is not the mail-group to ask questions, but I did not know any
other mail-group with enough competent readers.
The problem I have is to connect to a Windows-NT server (at the provider
side) with a Free-BSD 2.05 system. I wanted to do this with the "iij-ppp"
package because it seems to me as the most flexible one.
The Internet provider uses a Windows-NT server (this can't be changed,
I am sorry ;-), PPP and as login protection PAP (so no normal "login:"
and "password:").
The symptom is as follows (according to the log file (/var/log/ppp.log)):
A connection can be made. (Modems connect and this shows up in the log file).
They can exchange HDLC packages (The following packages are exchanged:).
- SendConfigReq
- Received Configure Request
- SendConfigNak <= Why?????
- Received Configure Reject
- SendConfigReq
- Received Configure Request
- SendConfigAck
- Received Configure Reject <= Why, they did Ack?
- .....
- Received Terminate Request
- SendTerminateAck
My questions:
Why are there so much Config Requests?
Why does is there an Ack followed by a Reject?
Why doesn't it simply work?
(Why does my provider use a bloody Windows-NT machine!?! :-( )
More information:
I am using a 386/40 with 8Mb, a low-cost V34 modem and iij-ppp
(version 0.94).
The iij-ppp is configured as follows:
Name My Side His Side
----------------------------------------
vjcomp enable accept
lqr enable accept
chap disable accept
pap enable accept
acfcomp enable accept
protocomp enable accept
pred1 enable accept
proxy disable deny
IPCP [Initial]
his side: 0.0.0.0, 0
my side: 0.0.0.0, 0
connected: 0 secs, idle: 0 secs
Defaults: My Address: 192.168.200.29/0 His Address: 0.0.0.0/0
LCP [Initial]
his side: MRU 0, ACCMAP 00000000, PROTOCOMP 0, ACFCOMP 0 MAGIC 00000000
my side: MRU 0, ACCMAP 00000000, PROTOCOMP 0, ACFCOMP 0 MAGIC 00000000
Defaults: MRU = 1500, ACCMAP = 00000000 Open Mode: passive
The authname and authkey are also set to appropriate values (which are
double check with the provider).
Which are mostly the default configuration parameters.
I would be pleased if someone knew an answer to one or more of these
questions or if one of you could give me more information about the
iij-ppp program (English/Dutch/German not Japanese!).
Hope to hear from you!!!
Rene de Vries
Note: I am sorry to post this message here, but I don't know any better
newsgroup/mail-group.
--- _ _ _ __ _
|- |_| |- |- / |- Rene de Vries rene@freeze.iaf.nl
| |\ |_ |_ /_ |_ Zuidlarenpad 15, 6835 GW Arnhem (NL) (voice) +31 263233019
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0stFmP-0007OfC>