Date: Wed, 27 Nov 2002 21:25:42 +0100 (CET) From: Dirk-Willem van Gulik <dirkx@webweaving.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-hackers@FreeBSD.ORG Subject: Re: Understanding PCI intr routing on a Cirrus Logic PD6729 Message-ID: <20021127210203.N2484-100000@foem.leiden.webweaving.org> In-Reply-To: <20021127.100323.111035160.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> In theory, you'd set the pd6729_intr_path to 2. However, there's
> still some stubtle bug that precludes this wfrom working.
Aye - that is what gives me the hangs - and kdb/ddb does not get me
into that.
> This doesn't force the interrupt to be IRQ3, but rather tells the card
> to use INTA#. The probe line for wi card should say irq N where N is
> the same as the bridge's irq.
Ack.
> I don't suppose you could enable a serial console and use that to get
> me a dmesg? I'll help you debug this, but am a little busy with 5.0
> issues right now to take another swing at it.
See below; intr routing =2 for the pd6729. I can switch off the VGA to
claim an extra IRQ. It hangs right at the end.
Dw
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #43: Wed Nov 27 20:58:23 CET 2002
dirkx@foem.leiden.webweaving.org:/usr/src/sys/i386/compile/FLOOR
Preloaded elf kernel "kernel" at 0xc03b41f0.
Calibrating clock(s) ... TSC clock: 119741036 Hz, i8254 clock: 1193076 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 119753076 Hz
CPU: Pentium/P54C (119.75-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x526 Stepping = 6
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (64 MB)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x003db000 - 0x03ff7fff, 63033344 bytes (15389 pages)
avail memory = 61280256 (58 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f99e0
bios32: Entry = 0xf0380 (c00f0380) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x3b0
pnpbios: Found PnP BIOS data at 0xc00fcef0
pnpbios: Entry = f0000:cf20 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80004830
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=122d8086)
Using $PIR table, 4 entries at 0xc00f0930
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 12 A 0x60 3 4 5 7 9 10 11 12
slot 1 0 12 B 0x61 3 4 5 7 9 10 11 12
slot 1 0 12 C 0x62 3 4 5 7 9 10 11 12
slot 1 0 12 D 0x63 3 4 5 7 9 10 11 12
slot 2 0 11 A 0x61 3 4 5 7 9 10 11 12
slot 2 0 11 B 0x62 3 4 5 7 9 10 11 12
slot 2 0 11 C 0x63 3 4 5 7 9 10 11 12
slot 2 0 11 D 0x60 3 4 5 7 9 10 11 12
slot 3 0 10 A 0x62 3 4 5 7 9 10 11 12
slot 3 0 10 B 0x63 3 4 5 7 9 10 11 12
slot 3 0 10 C 0x60 3 4 5 7 9 10 11 12
slot 3 0 10 D 0x61 3 4 5 7 9 10 11 12
slot 4 0 9 A 0x63 3 4 5 7 9 10 11 12
slot 4 0 9 B 0x60 3 4 5 7 9 10 11 12
slot 4 0 9 C 0x61 3 4 5 7 9 10 11 12
slot 4 0 9 D 0x62 3 4 5 7 9 10 11 12
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x122d, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x122e, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e800, size 4, enabled
found-> vendor=0x8086, dev=0x1230, revid=0x02
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000e400, size 5, enabled
found-> vendor=0x10b7, dev=0x5950, revid=0x00
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=7
map[10]: type 4, range 32, base 0000e000, size 2, enabled
found-> vendor=0x1013, dev=0x1100, revid=0x07
bus=0, slot=10, func=0
class=06-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000d800, size 2, enabled
found-> vendor=0x1013, dev=0x1100, revid=0x07
bus=0, slot=11, func=0
class=06-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 0000d400, size 2, enabled
found-> vendor=0x1013, dev=0x1100, revid=0x07
bus=0, slot=12, func=0
class=06-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 7.1 (no driver attached)
vx0: <3COM 3C595 Etherlink III PCI> port 0xe400-0xe41f irq 7 at device 9.0
on pci0
utp/tx[*utp*] address 00:a0:24:78:31:0d
vx0: bpf attached
pcic0: <Cirrus Logic PD6729/6730 PCI-PCMCIA Bridge> port 0xe000-0xe003 irq
9 at device 10.0 on pci0
pcic0: PD67xx maybe broken for PCI routing.
pcic0: PCI Configuration space:
0x00: 0x11001013 0x04000083 0x06050007 0x00000000
0x10: 0x0000e001 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x00000109
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00212007 0x00045309 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <Cirrus Logic PD6729/6730 PCI-PCMCIA Bridge> port 0xd800-0xd803 irq
10 at device 11.0 on pci0
pcic1: PD67xx maybe broken for PCI routing.
pcic1: PCI Configuration space:
0x00: 0x11001013 0x04000083 0x06050007 0x00000000
0x10: 0x0000d801 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0000010a
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00212007 0x00045309 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard2: <PC Card 16-bit bus (classic)> on pcic1
pccard3: <PC Card 16-bit bus (classic)> on pcic1
pcic2: <Cirrus Logic PD6729/6730 PCI-PCMCIA Bridge> port 0xd400-0xd403 irq
11 at device 12.0 on pci0
pcic2: PD67xx maybe broken for PCI routing.
pcic2: PCI Configuration space:
0x00: 0x11001013 0x04000083 0x06050007 0x00000000
0x10: 0x0000d401 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0000010b
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00212007 0x00045309 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard4: <PC Card 16-bit bus (classic)> on pcic2
pccard5: <PC Card 16-bit bus (classic)> on pcic2
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 11 devices, largest 66 bytes
PNP0500: adding irq mask 0x10
PNP0500: adding fixed io range 0x3f8-0x3ff, size=0x8, align=0x1
pnpbios: handle 2 device ID PNP0500 (0005d041)
PNP0700: adding irq mask 0x40
PNP0700: adding fixed io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding dma mask 0x4
PNP0700: adding fixed io range 0x3f7-0x3f7, size=0x1, align=0x1
pnpbios: handle 4 device ID PNP0700 (0007d041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000
PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
pnpbios: handle 6 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0
pnpbios: handle 7 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 8 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 10 device ID PNP0303 (0303d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0
pnpbios: handle 11 device ID PNP0c04 (040cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 12 device ID PNP0200 (0002d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 13 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 14 device ID PNP0a03 (030ad041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc5fff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ata0 failed to probe at port 0x1f0 irq 14 on isa0
ata1 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 81 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0 failed to probe on isa0
sio0: irq maps: 0x1 0x19 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0500> can't assign resources (port)
unknown: <PNP0500> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> failed to probe at port 0x3f7,0x3f2-0x3f5 irq 6 drq 2
on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
Sending DHCP Discover packet from interface vx0 (00:a0:24:78:31:0d)
pcic0: Power: Vcc=0 Vpp=0
pcic0: Power applied
Power complete.
pcic0: Power: Vcc=-1 Vpp=-1
pcic0: Autodetected 3.3V card
pcic0: Power applied
pcic0: Output enabled
pcic0: Settling complete
Power complete.
pccard: card inserted, slot 0
pcic0: reset 1 int is 10 stat is cf
pcic1: Power: Vcc=0 Vpp=0
pcic1: Power applied
Power complete.
pcic1: Power: Vcc=-1 Vpp=-1
pcic1: Autodetected 3.3V card
pcic1: Power applied
pcic1: Output enabled
pcic1: Settling complete
Power complete.
pccard: card inserted, slot 2
pcic1: reset 1 int is 10 stat is cf
pcic2: Power: Vcc=0 Vpp=0
pcic2: Power applied
Power complete.
pcic2: Power: Vcc=-1 Vpp=-1
pcic2: Autodetected 3.3V card
pcic2: Power applied
pcic2: Output enabled
pcic2: Settling complete
Power complete.
pccard: card inserted, slot 4
pcic2: reset 1 int is 10 stat is cf
pcic0: reset 2 int is 70 stat is cf
pcic1: reset 2 int is 70 stat is cf
pcic2: reset 2 int is 70 stat is cf
pcic0: reset 3 int is 70 stat is ef
pcic1: reset 3 int is 70 stat is ef
pcic2: reset 3 int is 70 stat is ef
Received DHCP Offer packet on vx0 from 10.11.0.2 (accepted) (no root path)
Received DHCP Offer packet on vx0 from 10.11.0.2 (ignored) (no root path)
Sending DHCP Request packet from interface vx0 (00:a0:24:78:31:0d)
Received DHCP Ack packet on vx0 from 10.11.0.2 (accepted) (got root path)
Received DHCP Ack packet on vx0 from 10.11.0.2 (accepted) (got root path)
vx0 at 10.11.0.112 server 10.11.0.2 server name foem boot file
/tftpboot/kernel
subnet mask 255.255.255.0 router 10.11.0.1 rootfs 10.11.0.2:/mboot
hostname floor.leiden.webweaving.org
Adjusted interface vx0
Mounting root from nfs:
NFS ROOT: 10.11.0.2:/mboot
start_init: trying /sbin/init
Interface vx0 IP-Address 10.11.0.112 Broadcast 10.11.0.255
md0: Malloc disk
GEOM: new disk md0
disklabel: ioctl DIOCWLABELG: EInappropriate ioOctl for device
M: Configure md0c, start 0 length 2097152 end 2097151
/dev/md0c: 2.0MB (4096 sectors) block size 16384, fragment size 2048
G using 4 cylindeEr groups of 0.52OMB, 33 blks, 256M inodes.
:super-block back ups (for fsck -bR #) at:
32, 10e88, 2144, 3200
configure md0c, start 0 length 2097152 end 2097151
kenv: unable to get dhcp.domain-name
kenv: unable to get dhcp.domain-name-servers
HOME=/
bootmode=autoboot
PS1='# '
OPTIND=1
PS2='> '
dlv=3
bootp_ifc=vx0
PPID=1
PATH=/sbin:/bin:/usr/sbin:/usr/bin
bootp_ipa=10.11.0.112
IFS='
'
i=10.11.0.112
iflist='vx0 lo0'
bootp_ipbca=10.11.0.255
Entropy harvesting: interrupts ethernet point_to_point.
Automatic boot in progress...
+++ mount_md of /var
md1: Malloc disk
GEOM: new disk md1
disklabel: ioctl DIOCWLABELG: EInappropriate ioOctl for device
M: Configure md1c, start 0 length 33554432 end 33554431
/dev/md1c: 32.0MB (65536 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 8.02MB, 513 blks, 1152 inodes.
super-block backups (for fsck -b #) at:
32, 16448,G 32864,EOM: Reconfigure md1c, start 0 length 33554432 end
33554431
49280
+++ populate /var using /etc/mtree/BSD.var.dist
./account missing (created)
./at missing (created)
./at/jobs missing (created)
./at/spool missing (created)
./backups missing (created)
./crash missing (created)
./cron missing (created)
./cron/tabs missing (created)
./db missing (created)
./db/entropy missing (created)
./db/ipf missing (created)
./db/pkg missing (created)
./empty missing (created)
./games missing (created)
./games/hackdir missing (created)
./games/hackdir/save missing (created)
./games/larn missing (created)
./games/phantasia missing (created)
./heimdal missing (created)
./log missing (created)
./mail missing (created)
./msgs missing (created)
./preserve missing (created)
./run missing (created)
./run/named missing (created)
./run/ppp missing (created)
./rwho missing (created)
./spool missing (created)
./spool/lock missing (created)
./spool/lpd missing (created)
./spool/mqueue missing (created)
./spool/opielocks missing (created)
./spool/output missing (created)
./spool/output/lpd missing (created)
./tmp missing (created)
./tmp/vi.recover missing (created)
./yp missing (created)
./var/spool/clientmqueue missing (created)
+++ create log files based on the contents of /etc/newsyslog.conf
+++ create lastlog
/usr/libexec/ld-elf.so.1: Shared object "libsasl.so.8" notm foundd
2: Malloc disk
GEOM: new disk md2
disklabel: ioctl DIOCWLABELG: EInappropriate ioOctl for device
M: Configure md2c, start 0 length 67108864 end 67108863
/dev/md2c: 64.0MB (131072 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 16.02MB, 1025 blks, 2176 inodes.
super-block backups (for fsck -b #) at:
32, 32832, 65632, 98432
GEOM: Reconfigure md2c, start 0 length 67108864 end 67108863
Setup PC-CARD: memory beep pccardd.
Doing initial network setup:.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
Additional routing options:.
Routing daemons:.
Mounting NFS filesystem:.
Additional daemons: syslogdNov 27 21:08:57 floor syslogd: kernel boot file
is /tftpboot/kernel
.
Doing additional network setup:.
Starting final network daemons: creating ssh1 RSA host key
Nov 27 21:09:00 floor pccardd[111]: Card
"Compaq"("WL200_11Mbps_Wireless_PCI_Card") [] [] matched "Compaq"
("WL200_11Mbps_Wireless_PCI_Card") [(null)] [(null)]
Generating public/private rsa1 key pair.
pccard0: Assigning wi0: io 0x240-0x27f irq 9 flags 0x0
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 9
pcic: I/O win 0 flags 5 240-27f
wi0 at port 0x240-0x27f irq 9 slot 0 on pccard0
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 9
wi0: 802.11 address: 00:50:8b:46:ae:3f
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary 0.03.00, Station 0.06.02
wi0: wi_has_wep = 1
wi0: bpf attached
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021127210203.N2484-100000>