Date: Sun, 29 Feb 2004 19:03:20 -0600 From: Yevgen Muntyan <muntyan@tamu.edu> To: freebsd-current@freebsd.org Subject: Can't assign irq for integrated wireless NIC Message-ID: <200402291903.20499.muntyan@tamu.edu>
next in thread | raw e-mail | index | archive | help
Hello. Can you help me?
I can't get my wireless card working in FreeBSD-CURRENT (freshly installed=
=20
yesterday 5.2.1 and cvsuped to CURRENT, GENERIC kernel). I have HP Pavilion=
=20
ze5470 laptop with integrated Broadcom wireless card. I'm trying to use=20
ndisimulator for it, but when I load if_ndis module, I get kernel panic
=2D---------------------------------------------------------
ndis0: <HP WLAN 54g W450 Network Adapter> mem 0xd0002000-0xd0003fff at devi=
ce 9.0 on pci0
panic: nexus_setup_intr: NULL irq resource!
at line 468 in file /usr/src/sys/i386/i386/nexus.c
cpuid=3D0;
Debugger("panic")
=2D----------------------------------------------------------
Lines in dmesg (I put full dmesg output in the end) about this card are
=2D----------------------------------------------------------
found->=A0vendor=3D0x14e4, dev=3D0x4320, revid=3D0x02
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D9, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), ma=
xlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D255
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D1 D2 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 1, range 32, base d0004000, size 12, =
memory disabled
=2E..
pci0: <network> at device 9.0 (no driver attached)
=2D----------------------------------------------------------
I get this with enabled acpi; without acpi system doesn't want to start - i=
t=20
hangs when mounting root.
About my laptop:
it has a button for turning wireless on, but I et the same result with this=
=20
button pressed/not pressed (I think this button is there only for windows -=
=20
linux doesn't care about it, in linux card works regardless of button state=
);
I have phoenix bios; bios setup allows only to change time, boot sequence,=
=20
something about mouse and there is some "disk check". There is no "PNP OS"
setting or something.
Any suggestions?
Thank you,
Yevgen.
=2D----------------------------------------------------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=A0=A0=A0=A0=A0=A0=A0=A0The Regents of the University of California. All ri=
ghts reserved.
=46reeBSD 5.2-CURRENT #0: Sun Feb 29 04:26:12 CST 2004
=A0 =A0 root@mlap.muntyan.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a9d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a9d26c.
Calibrating clock(s) ... i8254 clock: 1193181 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2658297856 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2658.30-MHz 686-class CPU)
=A0 Origin =3D "GenuineIntel" =A0Id =3D 0xf27 =A0Stepping =3D 7
=A0 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M=
CA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory =A0=3D 469172224 (447 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001b761fff, 447975424 bytes (109369 pages)
avail memory =3D 449372160 (428 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6a80
bios32: Entry =3D 0xfd750 (c00fd750) =A0Rev =3D 0 =A0Len =3D 1
pcibios: PCI BIOS entry at 0xfd750+0x14b
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry =3D f0000:afea =A0Rev =3D 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD =A0 RSDT> on motherboard
pci_open(1):=A0=A0=A0=A0mode 1 addr port (0x0cf8) is 0x80008004
pci_open(1a):=A0=A0=A0mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:=A0=A0=A0device 0 [class=3D060000] [hdr=3D00] is there (id=3Dc=
bb21002)
pcibios: BIOS version 2.10
=46ound $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location =A0Bus Device Pin =A0Link =A0IRQs
embedded =A0 =A00 =A0 =A01 =A0 =A0A =A0 0x01 =A07 10
embedded =A0 =A00 =A0 11 =A0 =A0A =A0 0x03 =A07 10
embedded =A0 =A00 =A0 11 =A0 =A0B =A0 0x04 =A07 10
embedded =A0 =A00 =A0 11 =A0 =A0C =A0 0x02 =A07 11
embedded =A0 =A00 =A0 =A08 =A0 =A0A =A0 0x07 =A07 10
embedded =A0 =A00 =A0 =A06 =A0 =A0A =A0 0x08 =A05
embedded =A0 =A00 =A0 =A09 =A0 =A0A =A0 0x04 =A07 10
embedded =A0 =A00 =A0 =A09 =A0 =A0B =A0 0x03 =A07 10
embedded =A0 =A00 =A0 10 =A0 =A0A =A0 0x06 =A07 11
embedded =A0 =A00 =A0 18 =A0 =A0A =A0 0x02 =A07 10
embedded =A0 =A00 =A0 12 =A0 =A0A =A0 0x06 =A07 11
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD =A0min =3D 2, max =3D 7, width =3D 5
ACPI timer looks BAD =A0min =3D 2, max =3D 5, width =3D 3
ACPI timer looks BAD =A0min =3D 2, max =3D 6, width =3D 4
ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2
ACPI timer looks BAD =A0min =3D 2, max =3D 5, width =3D 3
ACPI timer looks BAD =A0min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD =A0min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD =A0min =3D 2, max =3D 6, width =3D 4
ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2
ACPI timer looks BAD =A0min =3D 2, max =3D 7, width =3D 5
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
=2D--- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK7 irq =A0 5: [ =A05] low,level,sharable 0.6.0
\\_SB_.PCI0.ISA_.LNK6 irq =A0 0: [ =A07 10] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK3 irq =A010: [ =A07 10] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNK2 irq =A010: [ =A07 10] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNK5 irq =A011: [ =A07 11] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNK2 irq =A010: [ =A07 10] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNK3 irq =A010: [ =A07 10] low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNK5 irq =A011: [ =A07 11] low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNK2 irq =A010: [ =A07 10] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK1 irq =A010: [ =A07 10] low,level,sharable 0.18.0
=2D--- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNK6:
=A0=A0=A0=A0=A0=A0=A0=A0interrupts:=A0=A0=A0=A0=A0 =A0 =A0 7 =A0 =A010
=A0=A0=A0=A0=A0=A0=A0=A0penalty:=A0=A0=A0=A0=A0=A0=A0=A0 =A01110 =A0 710
=A0=A0=A0=A0=A0=A0=A0=A0references:=A0=A0=A0=A0=A01
=A0=A0=A0=A0=A0=A0=A0=A0priority:=A0=A0=A0=A0=A0=A0=A00
=2D--- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNK6:
=A0=A0=A0=A0=A0=A0=A0=A0interrupts:=A0=A0=A0=A0=A0 =A0 =A0 7 =A0 =A010
=A0=A0=A0=A0=A0=A0=A0=A0penalty:=A0=A0=A0=A0=A0=A0=A0=A0 =A01110 =A0 710
=A0=A0=A0=A0=A0=A0=A0=A0references:=A0=A0=A0=A0=A01
=A0=A0=A0=A0=A0=A0=A0=A0priority:=A0=A0=A0=A0=A0=A0=A0910
=2D--- after fixup boot-disabled links --------------
=2D--- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK7 irq =A0 5: [ =A05] low,level,sharable 0.6.0
\\_SB_.PCI0.ISA_.LNK6 irq =A010: [ =A07 10] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK3 irq =A010: [ =A07 10] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNK2 irq =A010: [ =A07 10] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNK5 irq =A011: [ =A07 11] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNK2 irq =A010: [ =A07 10] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNK3 irq =A010: [ =A07 10] low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNK5 irq =A011: [ =A07 11] low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNK2 irq =A010: [ =A07 10] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK1 irq =A010: [ =A07 10] low,level,sharable 0.18.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 3, range 32, base d4000000, size 26, =
enabled
=A0=A0=A0=A0=A0=A0=A0=A0map[14]: type 3, range 32, base d0007000, size 12, =
enabled
found->=A0vendor=3D0x1002, dev=3D0xcbb2, revid=3D0x02
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D0, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0006, statreg=3D0x2230, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), ma=
xlat=3D0x00 (0 ns)
found->=A0vendor=3D0x1002, dev=3D0x7010, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D1, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0007, statreg=3D0x0220, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x63 (2970 ns), mingnt=3D0x0c (3000 ns),=
maxlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 4, range 32, base 00001000, size =A08=
, enabled
=A0=A0=A0=A0=A0=A0=A0=A0map[14]: type 1, range 32, base d0000000, size 12, =
memory disabled
pcib0: matched entry for 0.6.INTA (source \\_SB_.PCI0.ISA_.LNK7)
pcib0: slot 6 INTA is routed to irq 5
found->=A0vendor=3D0x10b9, dev=3D0x5451, revid=3D0x02
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D6, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), =
maxlat=3D0x18 (6000 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D5
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D1 D2 D3 =A0current D0
found->=A0vendor=3D0x10b9, dev=3D0x1533, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D7, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D06-01-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x000f, statreg=3D0x0210, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxla=
t=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 1 =A0supports D0 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 1, range 32, base d0001000, size 12, =
memory disabled
=A0=A0=A0=A0=A0=A0=A0=A0map[14]: type 4, range 32, base 00001400, size =A08=
, port disabled
found->=A0vendor=3D0x10b9, dev=3D0x5457, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D8, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0000, statreg=3D0x0290, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), ma=
xlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D255
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 1, range 32, base d0002000, size 13, =
memory disabled
found->=A0vendor=3D0x14e4, dev=3D0x4320, revid=3D0x02
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D9, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), ma=
xlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D255
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D1 D2 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 1, range 32, base d0004000, size 12, =
memory disabled
pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNK5)
pcib0: slot 10 INTA is routed to irq 11
found->=A0vendor=3D0x1217, dev=3D0x6972, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D10, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D06-07-00, hdrtype=3D0x02, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0005, statreg=3D0x0410, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x80 (32000 ns)=
, maxlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D11
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D1 D2 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[20]: type 4, range 32, base 00002000, size =A05=
, enabled
pcib0: matched entry for 0.11.INTA (source \\_SB_.PCI0.ISA_.LNK2)
pcib0: slot 11 INTA is routed to irq 10
found->=A0vendor=3D0x1106, dev=3D0x3038, revid=3D0x50
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D11, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0015, statreg=3D0x0210, cachelnsz=3D8 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), ma=
xlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D10
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[20]: type 4, range 32, base 00002020, size =A05=
, enabled
pcib0: matched entry for 0.11.INTB (source \\_SB_.PCI0.ISA_.LNK3)
pcib0: slot 11 INTB is routed to irq 10
found->=A0vendor=3D0x1106, dev=3D0x3038, revid=3D0x50
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D11, func=3D1
=A0=A0=A0=A0=A0=A0=A0=A0class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0015, statreg=3D0x0210, cachelnsz=3D8 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), ma=
xlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Db, irq=3D10
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 1, range 32, base d0005000, size =A08=
, memory disabled
found->=A0vendor=3D0x1106, dev=3D0x3104, revid=3D0x51
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D11, func=3D2
=A0=A0=A0=A0=A0=A0=A0=A0class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0010, statreg=3D0x0210, cachelnsz=3D8 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), ma=
xlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Dc, irq=3D255
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 1, range 32, base d0005800, size 11, =
memory disabled
=A0=A0=A0=A0=A0=A0=A0=A0map[14]: type 1, range 32, base d0008000, size 14, =
enabled
found->=A0vendor=3D0x104c, dev=3D0x8026, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D12, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0010, statreg=3D0x0210, cachelnsz=3D8 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), =
maxlat=3D0x04 (1000 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D255
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D1 D2 D3 =A0current D0
=A0=A0=A0=A0=A0=A0=A0=A0map[20]: type 4, range 32, base 00002040, size =A04=
, enabled
found->=A0vendor=3D0x10b9, dev=3D0x5229, revid=3D0xc4
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D16, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D01-01-fa, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), m=
axlat=3D0x04 (1000 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D255
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D3 =A0current D0
found->=A0vendor=3D0x10b9, dev=3D0x7101, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D17, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0000, statreg=3D0x0200, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxla=
t=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 4, range 32, base 00002400, size =A08=
, enabled
=A0=A0=A0=A0=A0=A0=A0=A0map[14]: type 1, range 32, base d0006000, size 12, =
enabled
pcib0: matched entry for 0.18.INTA (source \\_SB_.PCI0.ISA_.LNK1)
pcib0: slot 18 INTA is routed to irq 10
found->=A0vendor=3D0x100b, dev=3D0x0020, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D0, slot=3D18, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0003, statreg=3D0x0290, cachelnsz=3D0 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x5a (2700 ns), mingnt=3D0x0b (2750 ns),=
maxlat=3D0x34 (13000 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D10
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D1 D2 D3 =A0current D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: =A0 secondary bus =A0 =A0 1
pcib1: =A0 subordinate bus =A0 1
pcib1: =A0 I/O decode =A0 =A0 =A0 =A00x9000-0x9fff
pcib1: =A0 memory decode =A0 =A0 0xd0300000-0xd03fffff
pcib1: =A0 prefetched decode 0xd8000000-0xdfffffff
=2D--- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK0 irq =A0 0: [ =A07 10] low,level,sharable 1.5.0
=2D--- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNK0:
=A0=A0=A0=A0=A0=A0=A0=A0interrupts:=A0=A0=A0=A0=A0 =A0 =A0 7 =A0 =A010
=A0=A0=A0=A0=A0=A0=A0=A0penalty:=A0=A0=A0=A0=A0=A0=A0=A0 =A01220 =A0 920
=A0=A0=A0=A0=A0=A0=A0=A0references:=A0=A0=A0=A0=A01
=A0=A0=A0=A0=A0=A0=A0=A0priority:=A0=A0=A0=A0=A0=A0=A00
=2D--- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNK0:
=A0=A0=A0=A0=A0=A0=A0=A0interrupts:=A0=A0=A0=A0=A0 =A0 =A0 7 =A0 =A010
=A0=A0=A0=A0=A0=A0=A0=A0penalty:=A0=A0=A0=A0=A0=A0=A0=A0 =A01220 =A0 920
=A0=A0=A0=A0=A0=A0=A0=A0references:=A0=A0=A0=A0=A01
=A0=A0=A0=A0=A0=A0=A0=A0priority:=A0=A0=A0=A0=A0=A0=A01070
=2D--- after fixup boot-disabled links --------------
=2D--- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK0 irq =A010: [ =A07 10] low,level,sharable 1.5.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
=A0=A0=A0=A0=A0=A0=A0=A0map[10]: type 3, range 32, base d8000000, size 27, =
enabled
=A0=A0=A0=A0=A0=A0=A0=A0map[14]: type 4, range 32, base 00009000, size =A08=
, enabled
=A0=A0=A0=A0=A0=A0=A0=A0map[18]: type 1, range 32, base d0300000, size 16, =
enabled
found->=A0vendor=3D0x1002, dev=3D0x4337, revid=3D0x00
=A0=A0=A0=A0=A0=A0=A0=A0bus=3D1, slot=3D5, func=3D0
=A0=A0=A0=A0=A0=A0=A0=A0class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
=A0=A0=A0=A0=A0=A0=A0=A0cmdreg=3D0x0283, statreg=3D0x02b0, cachelnsz=3D8 (d=
words)
=A0=A0=A0=A0=A0=A0=A0=A0lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns),=
maxlat=3D0x00 (0 ns)
=A0=A0=A0=A0=A0=A0=A0=A0intpin=3Da, irq=3D255
=A0=A0=A0=A0=A0=A0=A0=A0powerspec 2 =A0supports D0 D1 D2 D3 =A0current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
pci0: <network> at device 9.0 (no driver attached)
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> mem 0xd0004000-0xd0004fff ir=
q 11 at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
=A0 0x00: 0x69721217 0x04100007 0x06070000 0x00024000=20
=A0 0x10: 0xd0004000 0x020000a0 0x20020200 0xfffff000=20
=A0 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd=20
=A0 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b=20
=A0 0x40: 0x0850103c 0x00000001 0x00000000 0x00000000=20
=A0 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
=A0 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
=A0 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
=A0 0x80: 0x00000000 0x00000000 0x00000000 0x01881882=20
=A0 0x90: 0x00008002 0x00000000 0x00000000 0x00000000=20
=A0 0xa0: 0xfe020001 0x00c04100 0x00000000 0x00000011=20
=A0 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
=A0 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
=A0 0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000=20
=A0 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
=A0 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 10 at device 11.0=
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 10 at device 11.1=
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pci0: <serial bus, USB> at device 11.2 (no driver attached)
fwohci0: vendor=3D104c, dev=3D8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd0008000-0xd000bfff,0x=
d0005800-0xd0005fff at device 12.0 on pci0
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNK2)
pcib0: slot 12 INTA is routed to irq 10
fwohci0: OHCI version 1.10 (ROM=3D1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0d:9d:71:a0:47:ff:1c
fwohci0: resetting OHCI...done (loop=3D0)
fwohci0: fwphy_rddata: 0x2 loop=3D0, retry=3D0
fwohci0: phy read failed(2).
fwohci0: fwphy_rddata: 0x3 loop=3D0, retry=3D1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=3D0, retry=3D0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=3D0, retry=3D0
fwohci0: fwphy_rddata: 0x2 loop=3D0, retry=3D0
fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0
fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0
fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:9d:47:ff:1c
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=3D1)
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=3D0, retry=3D0
fwohci0: fwphy_rddata: 0x1 loop=3D0, retry=3D0
fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=3D0)
firewire0: bus manager 0 (me)
send phy_config root_node=3D-1 gap_count=3D5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=3D0
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x2040-0x204f at device=
16.0 on pci0
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: =A0stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 mask=3D03 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: =A0stat=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x2400-0x24ff mem 0xd0006000-0=
xd0006fff irq 10 at device 18.0 on pci0
sis0: Silicon Revision: DP83816A
sis0: Ethernet address: 00:0d:9d:46:b5:a2
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 1
ukphy0: =A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 3 us
acpi_ec0: info: new max delay is 10 us
acpi_ec0: info: new max delay is 30 us
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x401 0x409 0x401 0x401
sio0 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xcf000-0xcf7f=
f,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this ada=
pter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b=20
24 b3 00 6f 0d 0e 00 00 07 80 4a 80 8f 28 1f 47=20
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b=20
24 b3 00 6f 0d 0e 00 00 07 80 4a 80 8f 28 1f 47=20
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2658297856 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch =3D 0
=A0Current OP =A0 KEY INT BR =A0 len =A0 =A0 Addr =A0 Depend Stat: Cnt
1af0a000 OUTL ST2 ALL ALL =A0 =A012 00000000 1af0a080 8411:0009 RUN,ACTIVE,=
ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_acad0: acline initialization start
acpi_ec0: info: new max delay is 45 us
acpi_ec0: info: new max delay is 80 us
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA100 on AcerLabs Aladdin chip
ad0: <IC25N080ATMR04-0/MO4OAD0A> ATA-6 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D80pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <SONY DVD+RW DW-P50A/1.8e> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 8192KB buffer, PI=
O4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20482812
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20482875 l:20466810
[2] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/254/63 s:40949685 l:1992060
[3] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:42941745 l:113354640
GEOM: Configure ad0s1, start 32256 length 10487199744 end 10487231999
GEOM: Configure ad0s2, start 10487232000 length 10479006720 end 20966238719
GEOM: Configure ad0s3, start 20966238720 length 1019934720 end 21986173439
GEOM: Configure ad0s4, start 21986173440 length 58037575680 end 80023749119
GEOM: Configure ad0s2a, start 1073741824 length 9405264896 end 10479006719
GEOM: Configure ad0s2b, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s2c, start 0 length 10479006720 end 10479006719
MBREXT Slice 5 on ad0s4:
[0] f:00 typ:130 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:1991997
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:1992060 l:20000925
GEOM: Configure ad0s5, start 32256 length 1019902464 end 1019934719
MBREXT Slice 6 on ad0s4:
[0] f:00 typ:131 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:20000862
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:21992985 l:91361655
GEOM: Configure ad0s6, start 1019966976 length 10240441344 end 11260408319
MBREXT Slice 7 on ad0s4:
[0] f:00 typ:131 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:91361592
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s7, start 11260440576 length 46777135104 end 58037575679
bus_explore done
sbp_post_explore (sbp_cold=3D2)
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
acpi_ec0: info: new max delay is 430 us
acpi_ec0: info: new max delay is 800 us
acpi_cmbat0: battery initialization failed, giving up
warning: KLD '/boot/kernel/linux.ko' is newer than the linker.hints file
Linux ELF exec handler installed
acpi_ec0: info: new max delay is 11000 us
fd0: autoselection failed
fd0: autoselection failed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200402291903.20499.muntyan>