Date: Tue, 30 Nov 2010 05:24:25 -0500 From: Carmel <carmel_ny@hotmail.com> To: FreeBSD <freebsd-questions@freebsd.org> Subject: Re: Unable to access CDROM device to play music Message-ID: <BLU0-SMTP810113DCD8D4D5FB14250B93250@phx.gbl> In-Reply-To: <4CF44CCE.8030005@embarqmail.com> References: <4CF44CCE.8030005@embarqmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 29 Nov 2010 20:01:02 -0500 Nikolai Wendorf <nikolaiw@embarqmail.com> articulated: > All, > > I was getting exactly this same error following a fresh 8.1 load > > Sep 25 07:51:22 cyborg kernel: acd0: FAILURE - READ_BIG ILLEGAL > REQUEST asc=0x64 ascq=0x00 Sep 25 07:51:22 cyborg kernel: > (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 40 0 Sep 25 > 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): CAM status: SCSI Status > Error Sep 25 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): SCSI status: > Check Condition Sep 25 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): SCSI > sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track) Sep 25 > 07:51:22 cyborg kernel: (cd0:ata1:0:0:0): cddone: got error 0x6 back > > the solution was explained in the gnome install FAQ - here is a clip > - the devfs.conf changes fixed the problem. > > To figure out which CD/DVD drive you will be using, run the following > command as root: > > # camcontrol devlist > > > Your output will look similar to the following: > > <QSI CDRW/DVD SBW-242 UD22> at scbus1 target 0 lun 0 (cd0,pass0) > > > The devices in parentheses at the end are important. You must make > sure the /dev entries for those devices are writable by the users > that will be using brasero, totem, rhythmbox, or sound-juicer. In > addition to those devices, /dev/xpt* must also be writable to your > brasero, totem, rhythmbox, and sound-juicer users. The > following /etc/devfs.conf configuration will achieve the desired > results given the above devlist: > > perm cd0 0666 > perm xpt0 0666 > perm pass0 0666 I made those modifications a long time ago without success. # camcontrol devlist <PHILIPS DVD8801 GW02> at scbus1 target 0 lun 0 (pass0,cd0) <Generic USB SD Reader 1.00> at scbus2 target 0 lun 0 (pass1,da0) <Generic USB CF Reader 1.01> at scbus2 target 0 lun 1 (pass2,da1) <Generic USB SM Reader 1.02> at scbus2 target 0 lun 2 (pass3,da2) <Generic USB MS Reader 1.03> at scbus2 target 0 lun 3 (pass4,da3) # cat /etc/devfs.conf <snippet> perm cd0 0666 perm acd0 0666 perm xpt0 0666 perm pass0 0666 perm pass1 0666 perm pass2 0666 perm pass3 0666 perm pass4 0666 -- Carmel ✌ carmel_ny@hotmail.com Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the "Reply-To" header. __________________________________________________________________ To err is human, but when the eraser wears out before the pencil, you're overdoing it a little.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BLU0-SMTP810113DCD8D4D5FB14250B93250>